998 lines
31 KiB
C
998 lines
31 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_cec.c
|
|
* @author MCD Application Team
|
|
* @brief CEC HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the High Definition Multimedia Interface
|
|
* Consumer Electronics Control Peripheral (CEC).
|
|
* + Initialization and de-initialization function
|
|
* + IO operation function
|
|
* + Peripheral Control function
|
|
*
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@verbatim
|
|
===============================================================================
|
|
##### How to use this driver #####
|
|
===============================================================================
|
|
[..]
|
|
The CEC HAL driver can be used as follow:
|
|
|
|
(#) Declare a CEC_HandleTypeDef handle structure.
|
|
(#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
|
|
(##) Enable the CEC interface clock.
|
|
(##) CEC pins configuration:
|
|
(+++) Enable the clock for the CEC GPIOs.
|
|
(+++) Configure these CEC pins as alternate function pull-up.
|
|
(##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
|
|
and HAL_CEC_Receive_IT() APIs):
|
|
(+++) Configure the CEC interrupt priority.
|
|
(+++) Enable the NVIC CEC IRQ handle.
|
|
(+++) The specific CEC interrupts (Transmission complete interrupt,
|
|
RXNE interrupt and Error Interrupts) will be managed using the macros
|
|
__HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
|
|
and receive process.
|
|
|
|
(#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
|
|
in case of Bit Rising Error, Error-Bit generation conditions, device logical
|
|
address and Listen mode in the hcec Init structure.
|
|
|
|
(#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
|
|
|
|
[..]
|
|
(@) This API (HAL_CEC_Init()) configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc)
|
|
by calling the customed HAL_CEC_MspInit() API.
|
|
*** Callback registration ***
|
|
=============================================
|
|
|
|
The compilation define USE_HAL_CEC_REGISTER_CALLBACKS when set to 1
|
|
allows the user to configure dynamically the driver callbacks.
|
|
Use Functions HAL_CEC_RegisterCallback() or HAL_CEC_RegisterXXXCallback()
|
|
to register an interrupt callback.
|
|
|
|
Function HAL_CEC_RegisterCallback() allows to register following callbacks:
|
|
(+) TxCpltCallback : Tx Transfer completed callback.
|
|
(+) ErrorCallback : callback for error detection.
|
|
(+) MspInitCallback : CEC MspInit.
|
|
(+) MspDeInitCallback : CEC MspDeInit.
|
|
This function takes as parameters the HAL peripheral handle, the Callback ID
|
|
and a pointer to the user callback function.
|
|
|
|
For specific callback HAL_CEC_RxCpltCallback use dedicated register callbacks
|
|
HAL_CEC_RegisterRxCpltCallback().
|
|
|
|
Use function HAL_CEC_UnRegisterCallback() to reset a callback to the default
|
|
weak function.
|
|
HAL_CEC_UnRegisterCallback() takes as parameters the HAL peripheral handle,
|
|
and the Callback ID.
|
|
This function allows to reset following callbacks:
|
|
(+) TxCpltCallback : Tx Transfer completed callback.
|
|
(+) ErrorCallback : callback for error detection.
|
|
(+) MspInitCallback : CEC MspInit.
|
|
(+) MspDeInitCallback : CEC MspDeInit.
|
|
|
|
For callback HAL_CEC_RxCpltCallback use dedicated unregister callback :
|
|
HAL_CEC_UnRegisterRxCpltCallback().
|
|
|
|
By default, after the HAL_CEC_Init() and when the state is HAL_CEC_STATE_RESET
|
|
all callbacks are set to the corresponding weak functions :
|
|
examples HAL_CEC_TxCpltCallback() , HAL_CEC_RxCpltCallback().
|
|
Exception done for MspInit and MspDeInit functions that are
|
|
reset to the legacy weak function in the HAL_CEC_Init()/ HAL_CEC_DeInit() only when
|
|
these callbacks are null (not registered beforehand).
|
|
if not, MspInit or MspDeInit are not null, the HAL_CEC_Init() / HAL_CEC_DeInit()
|
|
keep and use the user MspInit/MspDeInit functions (registered beforehand)
|
|
|
|
Callbacks can be registered/unregistered in HAL_CEC_STATE_READY state only.
|
|
Exception done MspInit/MspDeInit callbacks that can be registered/unregistered
|
|
in HAL_CEC_STATE_READY or HAL_CEC_STATE_RESET state,
|
|
thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
|
|
In that case first register the MspInit/MspDeInit user callbacks
|
|
using HAL_CEC_RegisterCallback() before calling HAL_CEC_DeInit()
|
|
or HAL_CEC_Init() function.
|
|
|
|
When the compilation define USE_HAL_CEC_REGISTER_CALLBACKS is set to 0 or
|
|
not defined, the callback registration feature is not available and all callbacks
|
|
are set to the corresponding weak functions.
|
|
@endverbatim
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup CEC CEC
|
|
* @brief HAL CEC module driver
|
|
* @{
|
|
*/
|
|
#ifdef HAL_CEC_MODULE_ENABLED
|
|
#if defined (CEC)
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/** @defgroup CEC_Private_Constants CEC Private Constants
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @defgroup CEC_Private_Functions CEC Private Functions
|
|
* @{
|
|
*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup CEC_Exported_Functions CEC Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and Configuration functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to initialize the CEC
|
|
(+) The following parameters need to be configured:
|
|
(++) SignalFreeTime
|
|
(++) Tolerance
|
|
(++) BRERxStop (RX stopped or not upon Bit Rising Error)
|
|
(++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error)
|
|
(++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error)
|
|
(++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
|
|
(++) SignalFreeTimeOption (SFT Timer start definition)
|
|
(++) OwnAddress (CEC device address)
|
|
(++) ListenMode
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the CEC mode according to the specified
|
|
* parameters in the CEC_InitTypeDef and creates the associated handle .
|
|
* @param hcec CEC handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
|
|
{
|
|
/* Check the CEC handle allocation */
|
|
if ((hcec == NULL) || (hcec->Init.RxBuffer == NULL))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
|
|
assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
|
|
assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));
|
|
assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
|
|
assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
|
|
assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
|
|
assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
|
|
assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption));
|
|
assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
|
|
assert_param(IS_CEC_OWN_ADDRESS(hcec->Init.OwnAddress));
|
|
|
|
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
|
|
if (hcec->gState == HAL_CEC_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hcec->Lock = HAL_UNLOCKED;
|
|
|
|
hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */
|
|
hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak RxCpltCallback */
|
|
hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
|
|
if (hcec->MspInitCallback == NULL)
|
|
{
|
|
hcec->MspInitCallback = HAL_CEC_MspInit; /* Legacy weak MspInit */
|
|
}
|
|
|
|
/* Init the low level hardware */
|
|
hcec->MspInitCallback(hcec);
|
|
}
|
|
#else
|
|
if (hcec->gState == HAL_CEC_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hcec->Lock = HAL_UNLOCKED;
|
|
/* Init the low level hardware : GPIO, CLOCK */
|
|
HAL_CEC_MspInit(hcec);
|
|
}
|
|
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
|
|
|
|
hcec->gState = HAL_CEC_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_CEC_DISABLE(hcec);
|
|
|
|
/* Write to CEC Control Register */
|
|
hcec->Instance->CFGR = hcec->Init.SignalFreeTime | hcec->Init.Tolerance | hcec->Init.BRERxStop | \
|
|
hcec->Init.BREErrorBitGen | hcec->Init.LBPEErrorBitGen | \
|
|
hcec->Init.BroadcastMsgNoErrorBitGen | \
|
|
hcec->Init.SignalFreeTimeOption | ((uint32_t)(hcec->Init.OwnAddress) << 16U) | \
|
|
hcec->Init.ListenMode;
|
|
|
|
/* Enable the following CEC Transmission/Reception interrupts as
|
|
* well as the following CEC Transmission/Reception Errors interrupts
|
|
* Rx Byte Received IT
|
|
* End of Reception IT
|
|
* Rx overrun
|
|
* Rx bit rising error
|
|
* Rx short bit period error
|
|
* Rx long bit period error
|
|
* Rx missing acknowledge
|
|
* Tx Byte Request IT
|
|
* End of Transmission IT
|
|
* Tx Missing Acknowledge IT
|
|
* Tx-Error IT
|
|
* Tx-Buffer Underrun IT
|
|
* Tx arbitration lost */
|
|
__HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND |
|
|
CEC_IER_TX_ALL_ERR);
|
|
|
|
/* Enable the CEC Peripheral */
|
|
__HAL_CEC_ENABLE(hcec);
|
|
|
|
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
|
|
hcec->gState = HAL_CEC_STATE_READY;
|
|
hcec->RxState = HAL_CEC_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the CEC peripheral
|
|
* @param hcec CEC handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
|
|
{
|
|
/* Check the CEC handle allocation */
|
|
if (hcec == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
|
|
|
|
hcec->gState = HAL_CEC_STATE_BUSY;
|
|
|
|
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
|
|
if (hcec->MspDeInitCallback == NULL)
|
|
{
|
|
hcec->MspDeInitCallback = HAL_CEC_MspDeInit; /* Legacy weak MspDeInit */
|
|
}
|
|
|
|
/* DeInit the low level hardware */
|
|
hcec->MspDeInitCallback(hcec);
|
|
|
|
#else
|
|
/* DeInit the low level hardware */
|
|
HAL_CEC_MspDeInit(hcec);
|
|
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_CEC_DISABLE(hcec);
|
|
|
|
/* Clear Flags */
|
|
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND | CEC_FLAG_TXBR | CEC_FLAG_RXBR | CEC_FLAG_RXEND | CEC_ISR_ALL_ERROR);
|
|
|
|
/* Disable the following CEC Transmission/Reception interrupts as
|
|
* well as the following CEC Transmission/Reception Errors interrupts
|
|
* Rx Byte Received IT
|
|
* End of Reception IT
|
|
* Rx overrun
|
|
* Rx bit rising error
|
|
* Rx short bit period error
|
|
* Rx long bit period error
|
|
* Rx missing acknowledge
|
|
* Tx Byte Request IT
|
|
* End of Transmission IT
|
|
* Tx Missing Acknowledge IT
|
|
* Tx-Error IT
|
|
* Tx-Buffer Underrun IT
|
|
* Tx arbitration lost */
|
|
__HAL_CEC_DISABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND |
|
|
CEC_IER_TX_ALL_ERR);
|
|
|
|
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
|
|
hcec->gState = HAL_CEC_STATE_RESET;
|
|
hcec->RxState = HAL_CEC_STATE_RESET;
|
|
|
|
/* Process Unlock */
|
|
__HAL_UNLOCK(hcec);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the Own Address of the CEC device
|
|
* @param hcec CEC handle
|
|
* @param CEC_OwnAddress The CEC own address.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress));
|
|
|
|
if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY))
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hcec);
|
|
|
|
hcec->gState = HAL_CEC_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_CEC_DISABLE(hcec);
|
|
|
|
if (CEC_OwnAddress != CEC_OWN_ADDRESS_NONE)
|
|
{
|
|
hcec->Instance->CFGR |= ((uint32_t)CEC_OwnAddress << 16);
|
|
}
|
|
else
|
|
{
|
|
hcec->Instance->CFGR &= ~(CEC_CFGR_OAR);
|
|
}
|
|
|
|
hcec->gState = HAL_CEC_STATE_READY;
|
|
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hcec);
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_CEC_ENABLE(hcec);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief CEC MSP Init
|
|
* @param hcec CEC handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcec);
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_CEC_MspInit can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief CEC MSP DeInit
|
|
* @param hcec CEC handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcec);
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_CEC_MspDeInit can be implemented in the user file
|
|
*/
|
|
}
|
|
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief Register a User CEC Callback
|
|
* To be used instead of the weak predefined callback
|
|
* @param hcec CEC handle
|
|
* @param CallbackID ID of the callback to be registered
|
|
* This parameter can be one of the following values:
|
|
* @arg HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID
|
|
* @arg HAL_CEC_ERROR_CB_ID Error callback ID
|
|
* @arg HAL_CEC_MSPINIT_CB_ID MspInit callback ID
|
|
* @arg HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @param pCallback pointer to the Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID,
|
|
pCEC_CallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hcec);
|
|
|
|
if (hcec->gState == HAL_CEC_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_CEC_TX_CPLT_CB_ID :
|
|
hcec->TxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_CEC_ERROR_CB_ID :
|
|
hcec->ErrorCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_CEC_MSPINIT_CB_ID :
|
|
hcec->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_CEC_MSPDEINIT_CB_ID :
|
|
hcec->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (hcec->gState == HAL_CEC_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_CEC_MSPINIT_CB_ID :
|
|
hcec->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_CEC_MSPDEINIT_CB_ID :
|
|
hcec->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hcec);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unregister an CEC Callback
|
|
* CEC callback is redirected to the weak predefined callback
|
|
* @param hcec uart handle
|
|
* @param CallbackID ID of the callback to be unregistered
|
|
* This parameter can be one of the following values:
|
|
* @arg HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID
|
|
* @arg HAL_CEC_ERROR_CB_ID Error callback ID
|
|
* @arg HAL_CEC_MSPINIT_CB_ID MspInit callback ID
|
|
* @arg HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @retval status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hcec);
|
|
|
|
if (hcec->gState == HAL_CEC_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_CEC_TX_CPLT_CB_ID :
|
|
hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */
|
|
break;
|
|
|
|
case HAL_CEC_ERROR_CB_ID :
|
|
hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
break;
|
|
|
|
case HAL_CEC_MSPINIT_CB_ID :
|
|
hcec->MspInitCallback = HAL_CEC_MspInit;
|
|
break;
|
|
|
|
case HAL_CEC_MSPDEINIT_CB_ID :
|
|
hcec->MspDeInitCallback = HAL_CEC_MspDeInit;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (hcec->gState == HAL_CEC_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_CEC_MSPINIT_CB_ID :
|
|
hcec->MspInitCallback = HAL_CEC_MspInit;
|
|
break;
|
|
|
|
case HAL_CEC_MSPDEINIT_CB_ID :
|
|
hcec->MspDeInitCallback = HAL_CEC_MspDeInit;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hcec);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Register CEC RX complete Callback
|
|
* To be used instead of the weak HAL_CEC_RxCpltCallback() predefined callback
|
|
* @param hcec CEC handle
|
|
* @param pCallback pointer to the Rx transfer compelete Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hcec);
|
|
|
|
if (HAL_CEC_STATE_READY == hcec->RxState)
|
|
{
|
|
hcec->RxCpltCallback = pCallback;
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hcec);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief UnRegister CEC RX complete Callback
|
|
* CEC RX complete Callback is redirected to the weak HAL_CEC_RxCpltCallback() predefined callback
|
|
* @param hcec CEC handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hcec);
|
|
|
|
if (HAL_CEC_STATE_READY == hcec->RxState)
|
|
{
|
|
hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak CEC RxCpltCallback */
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hcec);
|
|
return status;
|
|
}
|
|
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions
|
|
* @brief CEC Transmit/Receive functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
This subsection provides a set of functions allowing to manage the CEC data transfers.
|
|
|
|
(#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
|
|
logical addresses (4-bit long addresses, 0xF for broadcast messages destination)
|
|
|
|
(#) The communication is performed using Interrupts.
|
|
These API's return the HAL status.
|
|
The end of the data processing will be indicated through the
|
|
dedicated CEC IRQ when using Interrupt mode.
|
|
The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
|
|
will be executed respectively at the end of the transmit or Receive process
|
|
The HAL_CEC_ErrorCallback() user callback will be executed when a communication
|
|
error is detected
|
|
|
|
(#) API's with Interrupt are :
|
|
(+) HAL_CEC_Transmit_IT()
|
|
(+) HAL_CEC_IRQHandler()
|
|
|
|
(#) A set of User Callbacks are provided:
|
|
(+) HAL_CEC_TxCpltCallback()
|
|
(+) HAL_CEC_RxCpltCallback()
|
|
(+) HAL_CEC_ErrorCallback()
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Send data in interrupt mode
|
|
* @param hcec CEC handle
|
|
* @param InitiatorAddress Initiator address
|
|
* @param DestinationAddress destination logical address
|
|
* @param pData pointer to input byte data buffer
|
|
* @param Size amount of data to be sent in bytes (without counting the header).
|
|
* 0 means only the header is sent (ping operation).
|
|
* Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress,
|
|
const uint8_t *pData, uint32_t Size)
|
|
{
|
|
/* if the peripheral isn't already busy and if there is no previous transmission
|
|
already pending due to arbitration lost */
|
|
if (hcec->gState == HAL_CEC_STATE_READY)
|
|
{
|
|
if ((pData == NULL) && (Size > 0U))
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
assert_param(IS_CEC_ADDRESS(DestinationAddress));
|
|
assert_param(IS_CEC_ADDRESS(InitiatorAddress));
|
|
assert_param(IS_CEC_MSGSIZE(Size));
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hcec);
|
|
hcec->pTxBuffPtr = pData;
|
|
hcec->gState = HAL_CEC_STATE_BUSY_TX;
|
|
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
|
|
|
|
/* initialize the number of bytes to send,
|
|
* 0 means only one header is sent (ping operation) */
|
|
hcec->TxXferCount = (uint16_t)Size;
|
|
|
|
/* in case of no payload (Size = 0), sender is only pinging the system;
|
|
Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
|
|
if (Size == 0U)
|
|
{
|
|
__HAL_CEC_LAST_BYTE_TX_SET(hcec);
|
|
}
|
|
|
|
/* send header block */
|
|
hcec->Instance->TXDR = (uint32_t)(((uint32_t)InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress);
|
|
|
|
/* Set TX Start of Message (TXSOM) bit */
|
|
__HAL_CEC_FIRST_BYTE_TX_SET(hcec);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hcec);
|
|
|
|
return HAL_OK;
|
|
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Get size of the received frame.
|
|
* @param hcec CEC handle
|
|
* @retval Frame size
|
|
*/
|
|
uint32_t HAL_CEC_GetLastReceivedFrameSize(const CEC_HandleTypeDef *hcec)
|
|
{
|
|
return hcec->RxXferSize;
|
|
}
|
|
|
|
/**
|
|
* @brief Change Rx Buffer.
|
|
* @param hcec CEC handle
|
|
* @param Rxbuffer Rx Buffer
|
|
* @note This function can be called only inside the HAL_CEC_RxCpltCallback()
|
|
* @retval Frame size
|
|
*/
|
|
void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer)
|
|
{
|
|
hcec->Init.RxBuffer = Rxbuffer;
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles CEC interrupt requests.
|
|
* @param hcec CEC handle
|
|
* @retval None
|
|
*/
|
|
void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
|
|
{
|
|
|
|
/* save interrupts register for further error or interrupts handling purposes */
|
|
uint32_t itflag;
|
|
itflag = hcec->Instance->ISR;
|
|
|
|
|
|
/* ----------------------------Arbitration Lost Management----------------------------------*/
|
|
/* CEC TX arbitration error interrupt occurred --------------------------------------*/
|
|
if (HAL_IS_BIT_SET(itflag, CEC_FLAG_ARBLST))
|
|
{
|
|
hcec->ErrorCode = HAL_CEC_ERROR_ARBLST;
|
|
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
|
|
}
|
|
|
|
/* ----------------------------Rx Management----------------------------------*/
|
|
/* CEC RX byte received interrupt ---------------------------------------------------*/
|
|
if (HAL_IS_BIT_SET(itflag, CEC_FLAG_RXBR))
|
|
{
|
|
/* reception is starting */
|
|
hcec->RxState = HAL_CEC_STATE_BUSY_RX;
|
|
hcec->RxXferSize++;
|
|
/* read received byte */
|
|
*hcec->Init.RxBuffer = (uint8_t) hcec->Instance->RXDR;
|
|
hcec->Init.RxBuffer++;
|
|
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
|
|
}
|
|
|
|
/* CEC RX end received interrupt ---------------------------------------------------*/
|
|
if (HAL_IS_BIT_SET(itflag, CEC_FLAG_RXEND))
|
|
{
|
|
/* clear IT */
|
|
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
|
|
|
|
/* Rx process is completed, restore hcec->RxState to Ready */
|
|
hcec->RxState = HAL_CEC_STATE_READY;
|
|
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
|
|
hcec->Init.RxBuffer -= hcec->RxXferSize;
|
|
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U)
|
|
hcec->RxCpltCallback(hcec, hcec->RxXferSize);
|
|
#else
|
|
HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize);
|
|
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
|
|
hcec->RxXferSize = 0U;
|
|
}
|
|
|
|
/* ----------------------------Tx Management----------------------------------*/
|
|
/* CEC TX byte request interrupt ------------------------------------------------*/
|
|
if (HAL_IS_BIT_SET(itflag, CEC_FLAG_TXBR))
|
|
{
|
|
--hcec->TxXferCount;
|
|
if (hcec->TxXferCount == 0U)
|
|
{
|
|
/* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
|
|
__HAL_CEC_LAST_BYTE_TX_SET(hcec);
|
|
}
|
|
/* In all cases transmit the byte */
|
|
hcec->Instance->TXDR = (uint8_t) * hcec->pTxBuffPtr;
|
|
hcec->pTxBuffPtr++;
|
|
/* clear Tx-Byte request flag */
|
|
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
|
|
}
|
|
|
|
/* CEC TX end interrupt ------------------------------------------------*/
|
|
if (HAL_IS_BIT_SET(itflag, CEC_FLAG_TXEND))
|
|
{
|
|
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND);
|
|
|
|
/* Tx process is ended, restore hcec->gState to Ready */
|
|
hcec->gState = HAL_CEC_STATE_READY;
|
|
/* Call the Process Unlocked before calling the Tx call back API to give the possibility to
|
|
start again the Transmission under the Tx call back API */
|
|
__HAL_UNLOCK(hcec);
|
|
hcec->ErrorCode = HAL_CEC_ERROR_NONE;
|
|
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U)
|
|
hcec->TxCpltCallback(hcec);
|
|
#else
|
|
HAL_CEC_TxCpltCallback(hcec);
|
|
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/* ----------------------------Rx/Tx Error Management----------------------------------*/
|
|
if ((itflag & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE | CEC_ISR_TXUDR |
|
|
CEC_ISR_TXERR | CEC_ISR_TXACKE)) != 0U)
|
|
{
|
|
hcec->ErrorCode = itflag;
|
|
__HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR | HAL_CEC_ERROR_BRE | CEC_FLAG_LBPE | CEC_FLAG_SBPE |
|
|
HAL_CEC_ERROR_RXACKE | HAL_CEC_ERROR_TXUDR | HAL_CEC_ERROR_TXERR | HAL_CEC_ERROR_TXACKE);
|
|
|
|
|
|
if ((itflag & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE)) != 0U)
|
|
{
|
|
hcec->Init.RxBuffer -= hcec->RxXferSize;
|
|
hcec->RxXferSize = 0U;
|
|
hcec->RxState = HAL_CEC_STATE_READY;
|
|
}
|
|
else if (((itflag & CEC_ISR_ARBLST) == 0U) && ((itflag & (CEC_ISR_TXUDR | CEC_ISR_TXERR | CEC_ISR_TXACKE)) != 0U))
|
|
{
|
|
/* Set the CEC state ready to be able to start again the process */
|
|
hcec->gState = HAL_CEC_STATE_READY;
|
|
}
|
|
else
|
|
{
|
|
/* Nothing todo*/
|
|
}
|
|
#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U)
|
|
hcec->ErrorCallback(hcec);
|
|
#else
|
|
/* Error Call Back */
|
|
HAL_CEC_ErrorCallback(hcec);
|
|
#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
/* Nothing todo*/
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Tx Transfer completed callback
|
|
* @param hcec CEC handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcec);
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_CEC_TxCpltCallback can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Rx Transfer completed callback
|
|
* @param hcec CEC handle
|
|
* @param RxFrameSize Size of frame
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcec);
|
|
UNUSED(RxFrameSize);
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_CEC_RxCpltCallback can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief CEC error callbacks
|
|
* @param hcec CEC handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcec);
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_CEC_ErrorCallback can be implemented in the user file
|
|
*/
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function
|
|
* @brief CEC control functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral Control function #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to control the CEC.
|
|
(+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
|
|
(+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral.
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief return the CEC state
|
|
* @param hcec pointer to a CEC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CEC module.
|
|
* @retval HAL state
|
|
*/
|
|
HAL_CEC_StateTypeDef HAL_CEC_GetState(const CEC_HandleTypeDef *hcec)
|
|
{
|
|
uint32_t temp1;
|
|
uint32_t temp2;
|
|
temp1 = hcec->gState;
|
|
temp2 = hcec->RxState;
|
|
|
|
return (HAL_CEC_StateTypeDef)(temp1 | temp2);
|
|
}
|
|
|
|
/**
|
|
* @brief Return the CEC error code
|
|
* @param hcec pointer to a CEC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CEC.
|
|
* @retval CEC Error Code
|
|
*/
|
|
uint32_t HAL_CEC_GetError(const CEC_HandleTypeDef *hcec)
|
|
{
|
|
return hcec->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* CEC */
|
|
#endif /* HAL_CEC_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|