751 lines
36 KiB
C
751 lines
36 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_qspi.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of QSPI HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32F4xx_HAL_QSPI_H
|
|
#define STM32F4xx_HAL_QSPI_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
#if defined(QUADSPI)
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup QSPI
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup QSPI_Exported_Types QSPI Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief QSPI Init structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock.
|
|
This parameter can be a number between 0 and 255 */
|
|
uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
|
|
This parameter can be a value between 1 and 32 */
|
|
uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
|
|
take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
|
|
This parameter can be a value of @ref QSPI_SampleShifting */
|
|
uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
|
|
required to address the flash memory. The flash capacity can be up to 4GB
|
|
(addressed using 32 bits) in indirect mode, but the addressable space in
|
|
memory-mapped mode is limited to 256MB
|
|
This parameter can be a number between 0 and 31 */
|
|
uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
|
|
of clock cycles which the chip select must remain high between commands.
|
|
This parameter can be a value of @ref QSPI_ChipSelectHighTime */
|
|
uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
|
|
This parameter can be a value of @ref QSPI_ClockMode */
|
|
uint32_t FlashID; /* Specifies the Flash which will be used,
|
|
This parameter can be a value of @ref QSPI_Flash_Select */
|
|
uint32_t DualFlash; /* Specifies the Dual Flash Mode State
|
|
This parameter can be a value of @ref QSPI_DualFlash_Mode */
|
|
}QSPI_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL QSPI State structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_QSPI_STATE_RESET = 0x00U, /*!< Peripheral not initialized */
|
|
HAL_QSPI_STATE_READY = 0x01U, /*!< Peripheral initialized and ready for use */
|
|
HAL_QSPI_STATE_BUSY = 0x02U, /*!< Peripheral in indirect mode and busy */
|
|
HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12U, /*!< Peripheral in indirect mode with transmission ongoing */
|
|
HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22U, /*!< Peripheral in indirect mode with reception ongoing */
|
|
HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42U, /*!< Peripheral in auto polling mode ongoing */
|
|
HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82U, /*!< Peripheral in memory mapped mode ongoing */
|
|
HAL_QSPI_STATE_ABORT = 0x08U, /*!< Peripheral with abort request ongoing */
|
|
HAL_QSPI_STATE_ERROR = 0x04U /*!< Peripheral in error */
|
|
}HAL_QSPI_StateTypeDef;
|
|
|
|
/**
|
|
* @brief QSPI Handle Structure definition
|
|
*/
|
|
#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
|
|
typedef struct __QSPI_HandleTypeDef
|
|
#else
|
|
typedef struct
|
|
#endif
|
|
{
|
|
QUADSPI_TypeDef *Instance; /* QSPI registers base address */
|
|
QSPI_InitTypeDef Init; /* QSPI communication parameters */
|
|
uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */
|
|
__IO uint32_t TxXferSize; /* QSPI Tx Transfer size */
|
|
__IO uint32_t TxXferCount; /* QSPI Tx Transfer Counter */
|
|
uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */
|
|
__IO uint32_t RxXferSize; /* QSPI Rx Transfer size */
|
|
__IO uint32_t RxXferCount; /* QSPI Rx Transfer Counter */
|
|
DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */
|
|
__IO HAL_LockTypeDef Lock; /* Locking object */
|
|
__IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */
|
|
__IO uint32_t ErrorCode; /* QSPI Error code */
|
|
uint32_t Timeout; /* Timeout for the QSPI memory access */
|
|
#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
|
|
void (* ErrorCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* AbortCpltCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* FifoThresholdCallback)(struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* CmdCpltCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* RxCpltCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* TxCpltCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* RxHalfCpltCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* TxHalfCpltCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* StatusMatchCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* TimeOutCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
|
|
void (* MspInitCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
void (* MspDeInitCallback) (struct __QSPI_HandleTypeDef *hqspi);
|
|
#endif
|
|
}QSPI_HandleTypeDef;
|
|
|
|
/**
|
|
* @brief QSPI Command structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Instruction; /* Specifies the Instruction to be sent
|
|
This parameter can be a value (8-bit) between 0x00 and 0xFF */
|
|
uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
|
|
This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
|
|
uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
|
|
This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
|
|
uint32_t AddressSize; /* Specifies the Address Size
|
|
This parameter can be a value of @ref QSPI_AddressSize */
|
|
uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
|
|
This parameter can be a value of @ref QSPI_AlternateBytesSize */
|
|
uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles.
|
|
This parameter can be a number between 0 and 31 */
|
|
uint32_t InstructionMode; /* Specifies the Instruction Mode
|
|
This parameter can be a value of @ref QSPI_InstructionMode */
|
|
uint32_t AddressMode; /* Specifies the Address Mode
|
|
This parameter can be a value of @ref QSPI_AddressMode */
|
|
uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode
|
|
This parameter can be a value of @ref QSPI_AlternateBytesMode */
|
|
uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases)
|
|
This parameter can be a value of @ref QSPI_DataMode */
|
|
uint32_t NbData; /* Specifies the number of data to transfer. (This is the number of bytes)
|
|
This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length
|
|
until end of memory)*/
|
|
uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase
|
|
This parameter can be a value of @ref QSPI_DdrMode */
|
|
uint32_t DdrHoldHalfCycle; /* Specifies if the DDR hold is enabled. When enabled it delays the data
|
|
output by one half of system clock in DDR mode.
|
|
This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
|
|
uint32_t SIOOMode; /* Specifies the send instruction only once mode
|
|
This parameter can be a value of @ref QSPI_SIOOMode */
|
|
}QSPI_CommandTypeDef;
|
|
|
|
/**
|
|
* @brief QSPI Auto Polling mode configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match.
|
|
This parameter can be any value between 0 and 0xFFFFFFFF */
|
|
uint32_t Mask; /* Specifies the mask to be applied to the status bytes received.
|
|
This parameter can be any value between 0 and 0xFFFFFFFF */
|
|
uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases.
|
|
This parameter can be any value between 0 and 0xFFFF */
|
|
uint32_t StatusBytesSize; /* Specifies the size of the status bytes received.
|
|
This parameter can be any value between 1 and 4 */
|
|
uint32_t MatchMode; /* Specifies the method used for determining a match.
|
|
This parameter can be a value of @ref QSPI_MatchMode */
|
|
uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match.
|
|
This parameter can be a value of @ref QSPI_AutomaticStop */
|
|
}QSPI_AutoPollingTypeDef;
|
|
|
|
/**
|
|
* @brief QSPI Memory Mapped mode configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
|
|
This parameter can be any value between 0 and 0xFFFF */
|
|
uint32_t TimeOutActivation; /* Specifies if the timeout counter is enabled to release the chip select.
|
|
This parameter can be a value of @ref QSPI_TimeOutActivation */
|
|
}QSPI_MemoryMappedTypeDef;
|
|
|
|
#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief HAL QSPI Callback ID enumeration definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_QSPI_ERROR_CB_ID = 0x00U, /*!< QSPI Error Callback ID */
|
|
HAL_QSPI_ABORT_CB_ID = 0x01U, /*!< QSPI Abort Callback ID */
|
|
HAL_QSPI_FIFO_THRESHOLD_CB_ID = 0x02U, /*!< QSPI FIFO Threshold Callback ID */
|
|
HAL_QSPI_CMD_CPLT_CB_ID = 0x03U, /*!< QSPI Command Complete Callback ID */
|
|
HAL_QSPI_RX_CPLT_CB_ID = 0x04U, /*!< QSPI Rx Complete Callback ID */
|
|
HAL_QSPI_TX_CPLT_CB_ID = 0x05U, /*!< QSPI Tx Complete Callback ID */
|
|
HAL_QSPI_RX_HALF_CPLT_CB_ID = 0x06U, /*!< QSPI Rx Half Complete Callback ID */
|
|
HAL_QSPI_TX_HALF_CPLT_CB_ID = 0x07U, /*!< QSPI Tx Half Complete Callback ID */
|
|
HAL_QSPI_STATUS_MATCH_CB_ID = 0x08U, /*!< QSPI Status Match Callback ID */
|
|
HAL_QSPI_TIMEOUT_CB_ID = 0x09U, /*!< QSPI Timeout Callback ID */
|
|
|
|
HAL_QSPI_MSP_INIT_CB_ID = 0x0AU, /*!< QSPI MspInit Callback ID */
|
|
HAL_QSPI_MSP_DEINIT_CB_ID = 0x0B0 /*!< QSPI MspDeInit Callback ID */
|
|
}HAL_QSPI_CallbackIDTypeDef;
|
|
|
|
/**
|
|
* @brief HAL QSPI Callback pointer definition
|
|
*/
|
|
typedef void (*pQSPI_CallbackTypeDef)(QSPI_HandleTypeDef *hqspi);
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup QSPI_ErrorCode QSPI Error Code
|
|
* @{
|
|
*/
|
|
#define HAL_QSPI_ERROR_NONE 0x00000000U /*!< No error */
|
|
#define HAL_QSPI_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */
|
|
#define HAL_QSPI_ERROR_TRANSFER 0x00000002U /*!< Transfer error */
|
|
#define HAL_QSPI_ERROR_DMA 0x00000004U /*!< DMA transfer error */
|
|
#define HAL_QSPI_ERROR_INVALID_PARAM 0x00000008U /*!< Invalid parameters error */
|
|
#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
|
|
#define HAL_QSPI_ERROR_INVALID_CALLBACK 0x00000010U /*!< Invalid callback error */
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
|
|
* @{
|
|
*/
|
|
#define QSPI_SAMPLE_SHIFTING_NONE 0x00000000U /*!<No clock cycle shift to sample data*/
|
|
#define QSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_ChipSelectHighTime QSPI ChipSelect High Time
|
|
* @{
|
|
*/
|
|
#define QSPI_CS_HIGH_TIME_1_CYCLE 0x00000000U /*!<nCS stay high for at least 1 clock cycle between commands*/
|
|
#define QSPI_CS_HIGH_TIME_2_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 2 clock cycles between commands*/
|
|
#define QSPI_CS_HIGH_TIME_3_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 3 clock cycles between commands*/
|
|
#define QSPI_CS_HIGH_TIME_4_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
|
|
#define QSPI_CS_HIGH_TIME_5_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2) /*!<nCS stay high for at least 5 clock cycles between commands*/
|
|
#define QSPI_CS_HIGH_TIME_6_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
|
|
#define QSPI_CS_HIGH_TIME_7_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
|
|
#define QSPI_CS_HIGH_TIME_8_CYCLE ((uint32_t)QUADSPI_DCR_CSHT) /*!<nCS stay high for at least 8 clock cycles between commands*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_ClockMode QSPI Clock Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_CLOCK_MODE_0 0x00000000U /*!<Clk stays low while nCS is released*/
|
|
#define QSPI_CLOCK_MODE_3 ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_Flash_Select QSPI Flash Select
|
|
* @{
|
|
*/
|
|
#define QSPI_FLASH_ID_1 0x00000000U /*!<FLASH 1 selected*/
|
|
#define QSPI_FLASH_ID_2 ((uint32_t)QUADSPI_CR_FSEL) /*!<FLASH 2 selected*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_DualFlash_Mode QSPI Dual Flash Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_DUALFLASH_ENABLE ((uint32_t)QUADSPI_CR_DFM) /*!<Dual-flash mode enabled*/
|
|
#define QSPI_DUALFLASH_DISABLE 0x00000000U /*!<Dual-flash mode disabled*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_AddressSize QSPI Address Size
|
|
* @{
|
|
*/
|
|
#define QSPI_ADDRESS_8_BITS 0x00000000U /*!<8-bit address*/
|
|
#define QSPI_ADDRESS_16_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
|
|
#define QSPI_ADDRESS_24_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
|
|
#define QSPI_ADDRESS_32_BITS ((uint32_t)QUADSPI_CCR_ADSIZE) /*!<32-bit address*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
|
|
* @{
|
|
*/
|
|
#define QSPI_ALTERNATE_BYTES_8_BITS 0x00000000U /*!<8-bit alternate bytes*/
|
|
#define QSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
|
|
#define QSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
|
|
#define QSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)QUADSPI_CCR_ABSIZE) /*!<32-bit alternate bytes*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_INSTRUCTION_NONE 0x00000000U /*!<No instruction*/
|
|
#define QSPI_INSTRUCTION_1_LINE ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
|
|
#define QSPI_INSTRUCTION_2_LINES ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
|
|
#define QSPI_INSTRUCTION_4_LINES ((uint32_t)QUADSPI_CCR_IMODE) /*!<Instruction on four lines*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_AddressMode QSPI Address Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_ADDRESS_NONE 0x00000000U /*!<No address*/
|
|
#define QSPI_ADDRESS_1_LINE ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
|
|
#define QSPI_ADDRESS_2_LINES ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
|
|
#define QSPI_ADDRESS_4_LINES ((uint32_t)QUADSPI_CCR_ADMODE) /*!<Address on four lines*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_AlternateBytesMode QSPI Alternate Bytes Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_ALTERNATE_BYTES_NONE 0x00000000U /*!<No alternate bytes*/
|
|
#define QSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
|
|
#define QSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
|
|
#define QSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)QUADSPI_CCR_ABMODE) /*!<Alternate bytes on four lines*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_DataMode QSPI Data Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_DATA_NONE 0x00000000U /*!<No data*/
|
|
#define QSPI_DATA_1_LINE ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
|
|
#define QSPI_DATA_2_LINES ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
|
|
#define QSPI_DATA_4_LINES ((uint32_t)QUADSPI_CCR_DMODE) /*!<Data on four lines*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_DdrMode QSPI DDR Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_DDR_MODE_DISABLE 0x00000000U /*!<Double data rate mode disabled*/
|
|
#define QSPI_DDR_MODE_ENABLE ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_DdrHoldHalfCycle QSPI DDR Data Output Delay
|
|
* @{
|
|
*/
|
|
#define QSPI_DDR_HHC_ANALOG_DELAY 0x00000000U /*!<Delay the data output using analog delay in DDR mode*/
|
|
#define QSPI_DDR_HHC_HALF_CLK_DELAY ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by one half of system clock in DDR mode*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_SIOOMode QSPI Send Instruction Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_SIOO_INST_EVERY_CMD 0x00000000U /*!<Send instruction on every transaction*/
|
|
#define QSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_MatchMode QSPI Match Mode
|
|
* @{
|
|
*/
|
|
#define QSPI_MATCH_MODE_AND 0x00000000U /*!<AND match mode between unmasked bits*/
|
|
#define QSPI_MATCH_MODE_OR ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
|
|
* @{
|
|
*/
|
|
#define QSPI_AUTOMATIC_STOP_DISABLE 0x00000000U /*!<AutoPolling stops only with abort or QSPI disabling*/
|
|
#define QSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_TimeOutActivation QSPI Timeout Activation
|
|
* @{
|
|
*/
|
|
#define QSPI_TIMEOUT_COUNTER_DISABLE 0x00000000U /*!<Timeout counter disabled, nCS remains active*/
|
|
#define QSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_Flags QSPI Flags
|
|
* @{
|
|
*/
|
|
#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
|
|
#define QSPI_FLAG_TO QUADSPI_SR_TOF /*!<Timeout flag: timeout occurs in memory-mapped mode*/
|
|
#define QSPI_FLAG_SM QUADSPI_SR_SMF /*!<Status match flag: received data matches in autopolling mode*/
|
|
#define QSPI_FLAG_FT QUADSPI_SR_FTF /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
|
|
#define QSPI_FLAG_TC QUADSPI_SR_TCF /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
|
|
#define QSPI_FLAG_TE QUADSPI_SR_TEF /*!<Transfer error flag: invalid address is being accessed*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_Interrupts QSPI Interrupts
|
|
* @{
|
|
*/
|
|
#define QSPI_IT_TO QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
|
|
#define QSPI_IT_SM QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
|
|
#define QSPI_IT_FT QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
|
|
#define QSPI_IT_TC QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
|
|
#define QSPI_IT_TE QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
|
|
* @brief QSPI Timeout definition
|
|
* @{
|
|
*/
|
|
#define HAL_QSPI_TIMEOUT_DEFAULT_VALUE 5000U /* 5 s */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
|
|
* @{
|
|
*/
|
|
/** @brief Reset QSPI handle state.
|
|
* @param __HANDLE__ QSPI handle.
|
|
* @retval None
|
|
*/
|
|
#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
|
|
#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) do { \
|
|
(__HANDLE__)->State = HAL_QSPI_STATE_RESET; \
|
|
(__HANDLE__)->MspInitCallback = NULL; \
|
|
(__HANDLE__)->MspDeInitCallback = NULL; \
|
|
} while(0)
|
|
#else
|
|
#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
|
|
#endif
|
|
|
|
/** @brief Enable the QSPI peripheral.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
|
|
|
|
/** @brief Disable the QSPI peripheral.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
|
|
|
|
/** @brief Enable the specified QSPI interrupt.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @param __INTERRUPT__ specifies the QSPI interrupt source to enable.
|
|
* This parameter can be one of the following values:
|
|
* @arg QSPI_IT_TO: QSPI Timeout interrupt
|
|
* @arg QSPI_IT_SM: QSPI Status match interrupt
|
|
* @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
|
|
* @arg QSPI_IT_TC: QSPI Transfer complete interrupt
|
|
* @arg QSPI_IT_TE: QSPI Transfer error interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
|
|
|
|
|
|
/** @brief Disable the specified QSPI interrupt.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @param __INTERRUPT__ specifies the QSPI interrupt source to disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg QSPI_IT_TO: QSPI Timeout interrupt
|
|
* @arg QSPI_IT_SM: QSPI Status match interrupt
|
|
* @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
|
|
* @arg QSPI_IT_TC: QSPI Transfer complete interrupt
|
|
* @arg QSPI_IT_TE: QSPI Transfer error interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
|
|
|
|
/** @brief Check whether the specified QSPI interrupt source is enabled or not.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @param __INTERRUPT__ specifies the QSPI interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg QSPI_IT_TO: QSPI Timeout interrupt
|
|
* @arg QSPI_IT_SM: QSPI Status match interrupt
|
|
* @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
|
|
* @arg QSPI_IT_TC: QSPI Transfer complete interrupt
|
|
* @arg QSPI_IT_TE: QSPI Transfer error interrupt
|
|
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the selected QSPI flag is set or not.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @param __FLAG__ specifies the QSPI flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg QSPI_FLAG_BUSY: QSPI Busy flag
|
|
* @arg QSPI_FLAG_TO: QSPI Timeout flag
|
|
* @arg QSPI_FLAG_SM: QSPI Status match flag
|
|
* @arg QSPI_FLAG_FT: QSPI FIFO threshold flag
|
|
* @arg QSPI_FLAG_TC: QSPI Transfer complete flag
|
|
* @arg QSPI_FLAG_TE: QSPI Transfer error flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0U) ? SET : RESET)
|
|
|
|
/** @brief Clears the specified QSPI's flag status.
|
|
* @param __HANDLE__ specifies the QSPI Handle.
|
|
* @param __FLAG__ specifies the QSPI clear register flag that needs to be set
|
|
* This parameter can be one of the following values:
|
|
* @arg QSPI_FLAG_TO: QSPI Timeout flag
|
|
* @arg QSPI_FLAG_SM: QSPI Status match flag
|
|
* @arg QSPI_FLAG_TC: QSPI Transfer complete flag
|
|
* @arg QSPI_FLAG_TE: QSPI Transfer error flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup QSPI_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup QSPI_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
/* Initialization/de-initialization functions ********************************/
|
|
HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi);
|
|
HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup QSPI_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
/* IO operation functions *****************************************************/
|
|
/* QSPI IRQ handler method */
|
|
void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
|
|
|
|
/* QSPI indirect mode */
|
|
HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
|
|
HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
|
|
HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
|
|
HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
|
|
HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
|
|
|
|
/* QSPI status flag polling mode */
|
|
HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
|
|
|
|
/* QSPI memory-mapped mode */
|
|
HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
|
|
|
|
/* Callback functions in non-blocking modes ***********************************/
|
|
void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_AbortCpltCallback (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
|
|
|
|
/* QSPI indirect mode */
|
|
void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
|
|
|
|
/* QSPI status flag polling mode */
|
|
void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi);
|
|
|
|
/* QSPI memory-mapped mode */
|
|
void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi);
|
|
|
|
#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1)
|
|
/* QSPI callback registering/unregistering */
|
|
HAL_StatusTypeDef HAL_QSPI_RegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId, pQSPI_CallbackTypeDef pCallback);
|
|
HAL_StatusTypeDef HAL_QSPI_UnRegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId);
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup QSPI_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
/* Peripheral Control and State functions ************************************/
|
|
HAL_QSPI_StateTypeDef HAL_QSPI_GetState (QSPI_HandleTypeDef *hqspi);
|
|
uint32_t HAL_QSPI_GetError (QSPI_HandleTypeDef *hqspi);
|
|
HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi);
|
|
HAL_StatusTypeDef HAL_QSPI_Abort_IT (QSPI_HandleTypeDef *hqspi);
|
|
void HAL_QSPI_SetTimeout (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold);
|
|
uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi);
|
|
HAL_StatusTypeDef HAL_QSPI_SetFlashID (QSPI_HandleTypeDef *hqspi, uint32_t FlashID);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported functions -------------------------------------------------*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup QSPI_Private_Macros QSPI Private Macros
|
|
* @{
|
|
*/
|
|
#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFU)
|
|
|
|
#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0U) && ((THR) <= 32U))
|
|
|
|
#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
|
|
((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
|
|
|
|
#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31U))
|
|
|
|
#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
|
|
((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
|
|
|
|
#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
|
|
((CLKMODE) == QSPI_CLOCK_MODE_3))
|
|
|
|
#define IS_QSPI_FLASH_ID(FLASH_ID) (((FLASH_ID) == QSPI_FLASH_ID_1) || \
|
|
((FLASH_ID) == QSPI_FLASH_ID_2))
|
|
|
|
#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \
|
|
((MODE) == QSPI_DUALFLASH_DISABLE))
|
|
|
|
#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFFU)
|
|
|
|
#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \
|
|
((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
|
|
((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
|
|
((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
|
|
|
|
#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \
|
|
((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
|
|
((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
|
|
((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
|
|
|
|
#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31U)
|
|
|
|
#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \
|
|
((MODE) == QSPI_INSTRUCTION_1_LINE) || \
|
|
((MODE) == QSPI_INSTRUCTION_2_LINES) || \
|
|
((MODE) == QSPI_INSTRUCTION_4_LINES))
|
|
|
|
#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \
|
|
((MODE) == QSPI_ADDRESS_1_LINE) || \
|
|
((MODE) == QSPI_ADDRESS_2_LINES) || \
|
|
((MODE) == QSPI_ADDRESS_4_LINES))
|
|
|
|
#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \
|
|
((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \
|
|
((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
|
|
((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
|
|
|
|
#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \
|
|
((MODE) == QSPI_DATA_1_LINE) || \
|
|
((MODE) == QSPI_DATA_2_LINES) || \
|
|
((MODE) == QSPI_DATA_4_LINES))
|
|
|
|
#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
|
|
((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
|
|
|
|
#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
|
|
((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
|
|
|
|
#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
|
|
((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
|
|
|
|
#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
|
|
|
|
#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U))
|
|
|
|
#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \
|
|
((MODE) == QSPI_MATCH_MODE_OR))
|
|
|
|
#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
|
|
((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
|
|
|
|
#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
|
|
((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
|
|
|
|
#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU)
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of private macros -----------------------------------------------------*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* defined(QUADSPI) */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* STM32F4xx_HAL_QSPI_H */
|