/**
  ******************************************************************************
  * @file    stm32f4xx_hal_sdram.c
  * @author  MCD Application Team
  * @brief   SDRAM HAL module driver.
  *          This file provides a generic firmware to drive SDRAM memories mounted
  *          as external device.
  *
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  @verbatim
  ==============================================================================
                       ##### How to use this driver #####
  ==============================================================================
  [..]
    This driver is a generic layered driver which contains a set of APIs used to
    control SDRAM memories. It uses the FMC layer functions to interface
    with SDRAM devices.
    The following sequence should be followed to configure the FMC to interface
    with SDRAM memories:

   (#) Declare a SDRAM_HandleTypeDef handle structure, for example:
          SDRAM_HandleTypeDef  hsdram

       (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed
            values of the structure member.

       (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined
            base register instance for NOR or SDRAM device

   (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example:
          FMC_SDRAM_TimingTypeDef  Timing;
      and fill its fields with the allowed values of the structure member.

   (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function
       performs the following sequence:

       (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit()
       (##) Control register configuration using the FMC SDRAM interface function
            FMC_SDRAM_Init()
       (##) Timing register configuration using the FMC SDRAM interface function
            FMC_SDRAM_Timing_Init()
       (##) Program the SDRAM external device by applying its initialization sequence
            according to the device plugged in your hardware. This step is mandatory
            for accessing the SDRAM device.

   (#) At this stage you can perform read/write accesses from/to the memory connected
       to the SDRAM Bank. You can perform either polling or DMA transfer using the
       following APIs:
       (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access
       (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer

   (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/
       HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or
       the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM
       device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef
       structure.

   (#) You can continuously monitor the SDRAM device HAL state by calling the function
       HAL_SDRAM_GetState()

   *** Callback registration ***
    =============================================
    [..]
      The compilation define  USE_HAL_SDRAM_REGISTER_CALLBACKS when set to 1
      allows the user to configure dynamically the driver callbacks.

      Use Functions HAL_SDRAM_RegisterCallback() to register a user callback,
      it allows to register following callbacks:
        (+) MspInitCallback    : SDRAM MspInit.
        (+) MspDeInitCallback  : SDRAM MspDeInit.
      This function takes as parameters the HAL peripheral handle, the Callback ID
      and a pointer to the user callback function.

      Use function HAL_SDRAM_UnRegisterCallback() to reset a callback to the default
      weak (overridden) function. It allows to reset following callbacks:
        (+) MspInitCallback    : SDRAM MspInit.
        (+) MspDeInitCallback  : SDRAM MspDeInit.
      This function) takes as parameters the HAL peripheral handle and the Callback ID.

      By default, after the HAL_SDRAM_Init and if the state is HAL_SDRAM_STATE_RESET
      all callbacks are reset to the corresponding legacy weak (overridden) functions.
      Exception done for MspInit and MspDeInit callbacks that are respectively
      reset to the legacy weak (overridden) functions in the HAL_SDRAM_Init
      and  HAL_SDRAM_DeInit only when these callbacks are null (not registered beforehand).
      If not, MspInit or MspDeInit are not null, the HAL_SDRAM_Init and HAL_SDRAM_DeInit
      keep and use the user MspInit/MspDeInit callbacks (registered beforehand)

      Callbacks can be registered/unregistered in READY state only.
      Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
      in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
      during the Init/DeInit.
      In that case first register the MspInit/MspDeInit user callbacks
      using HAL_SDRAM_RegisterCallback before calling HAL_SDRAM_DeInit
      or HAL_SDRAM_Init function.

      When The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS is set to 0 or
      not defined, the callback registering feature is not available
      and weak (overridden) callbacks are used.

  @endverbatim
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"

#if defined(FMC_Bank5_6)

/** @addtogroup STM32F4xx_HAL_Driver
  * @{
  */

#ifdef HAL_SDRAM_MODULE_ENABLED

/** @defgroup SDRAM SDRAM
  * @brief SDRAM driver modules
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup SDRAM_Private_Functions SDRAM Private Functions
  * @{
  */
static void SDRAM_DMACplt(DMA_HandleTypeDef *hdma);
static void SDRAM_DMACpltProt(DMA_HandleTypeDef *hdma);
static void SDRAM_DMAError(DMA_HandleTypeDef *hdma);
/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/
/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions
  * @{
  */

/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions
  * @brief    Initialization and Configuration functions
  *
  @verbatim
  ==============================================================================
           ##### SDRAM Initialization and de_initialization functions #####
  ==============================================================================
  [..]
    This section provides functions allowing to initialize/de-initialize
    the SDRAM memory

@endverbatim
  * @{
  */

/**
  * @brief  Performs the SDRAM device initialization sequence.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  Timing Pointer to SDRAM control timing structure
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing)
{
  /* Check the SDRAM handle parameter */
  if (hsdram == NULL)
  {
    return HAL_ERROR;
  }

  if (hsdram->State == HAL_SDRAM_STATE_RESET)
  {
    /* Allocate lock resource and initialize it */
    hsdram->Lock = HAL_UNLOCKED;
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
    if (hsdram->MspInitCallback == NULL)
    {
      hsdram->MspInitCallback = HAL_SDRAM_MspInit;
    }
    hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback;
    hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
    hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;

    /* Init the low level hardware */
    hsdram->MspInitCallback(hsdram);
#else
    /* Initialize the low level hardware (MSP) */
    HAL_SDRAM_MspInit(hsdram);
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
  }

  /* Initialize the SDRAM controller state */
  hsdram->State = HAL_SDRAM_STATE_BUSY;

  /* Initialize SDRAM control Interface */
  (void)FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init));

  /* Initialize SDRAM timing Interface */
  (void)FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank);
  /* Update the SDRAM controller state */
  hsdram->State = HAL_SDRAM_STATE_READY;

  return HAL_OK;
}

/**
  * @brief  Perform the SDRAM device initialization sequence.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram)
{
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
  if (hsdram->MspDeInitCallback == NULL)
  {
    hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit;
  }

  /* DeInit the low level hardware */
  hsdram->MspDeInitCallback(hsdram);
#else
  /* Initialize the low level hardware (MSP) */
  HAL_SDRAM_MspDeInit(hsdram);
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */

  /* Configure the SDRAM registers with their reset values */
  (void)FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);

  /* Reset the SDRAM controller state */
  hsdram->State = HAL_SDRAM_STATE_RESET;

  /* Release Lock */
  __HAL_UNLOCK(hsdram);

  return HAL_OK;
}

/**
  * @brief  SDRAM MSP Init.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval None
  */
__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hsdram);

  /* NOTE: This function Should not be modified, when the callback is needed,
            the HAL_SDRAM_MspInit could be implemented in the user file
   */
}

/**
  * @brief  SDRAM MSP DeInit.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval None
  */
__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hsdram);

  /* NOTE: This function Should not be modified, when the callback is needed,
            the HAL_SDRAM_MspDeInit could be implemented in the user file
   */
}

/**
  * @brief  This function handles SDRAM refresh error interrupt request.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval HAL status
  */
void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram)
{
  /* Check SDRAM interrupt Rising edge flag */
  if (__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT))
  {
    /* SDRAM refresh error interrupt callback */
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
    hsdram->RefreshErrorCallback(hsdram);
#else
    HAL_SDRAM_RefreshErrorCallback(hsdram);
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */

    /* Clear SDRAM refresh error interrupt pending bit */
    __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR);
  }
}

/**
  * @brief  SDRAM Refresh error callback.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval None
  */
__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hsdram);

  /* NOTE: This function Should not be modified, when the callback is needed,
            the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file
   */
}

/**
  * @brief  DMA transfer complete callback.
  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
  *                the configuration information for the specified DMA module.
  * @retval None
  */
__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hdma);

  /* NOTE: This function Should not be modified, when the callback is needed,
            the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file
   */
}

/**
  * @brief  DMA transfer complete error callback.
  * @param  hdma DMA handle
  * @retval None
  */
__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hdma);

  /* NOTE: This function Should not be modified, when the callback is needed,
            the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file
   */
}

/**
  * @}
  */

/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions
  * @brief    Input Output and memory control functions
  *
  @verbatim
  ==============================================================================
                    ##### SDRAM Input and Output functions #####
  ==============================================================================
  [..]
    This section provides functions allowing to use and control the SDRAM memory

@endverbatim
  * @{
  */

/**
  * @brief  Reads 8-bit data buffer from the SDRAM memory.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to read start address
  * @param  pDstBuffer Pointer to destination buffer
  * @param  BufferSize Size of the buffer to read from memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer,
                                    uint32_t BufferSize)
{
  uint32_t size;
  __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
  uint8_t *pdestbuff = pDstBuffer;
  HAL_SDRAM_StateTypeDef state = hsdram->State;

  /* Check the SDRAM controller state */
  if (state == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Read data from source */
    for (size = BufferSize; size != 0U; size--)
    {
      *pdestbuff = *(__IO uint8_t *)pSdramAddress;
      pdestbuff++;
      pSdramAddress++;
    }

    /* Update the SDRAM controller state */
    hsdram->State = state;

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    return  HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Writes 8-bit data buffer to SDRAM memory.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to write start address
  * @param  pSrcBuffer Pointer to source buffer to write
  * @param  BufferSize Size of the buffer to write to memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer,
                                     uint32_t BufferSize)
{
  uint32_t size;
  __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
  uint8_t *psrcbuff = pSrcBuffer;

  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Write data to memory */
    for (size = BufferSize; size != 0U; size--)
    {
      *(__IO uint8_t *)pSdramAddress = *psrcbuff;
      psrcbuff++;
      pSdramAddress++;
    }

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_READY;

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    return  HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Reads 16-bit data buffer from the SDRAM memory.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to read start address
  * @param  pDstBuffer Pointer to destination buffer
  * @param  BufferSize Size of the buffer to read from memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer,
                                     uint32_t BufferSize)
{
  uint32_t size;
  __IO uint32_t *pSdramAddress = pAddress;
  uint16_t *pdestbuff = pDstBuffer;
  HAL_SDRAM_StateTypeDef state = hsdram->State;

  /* Check the SDRAM controller state */
  if (state == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Read data from memory */
    for (size = BufferSize; size >= 2U ; size -= 2U)
    {
      *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU);
      pdestbuff++;
      *pdestbuff = (uint16_t)(((*pSdramAddress) & 0xFFFF0000U) >> 16U);
      pdestbuff++;
      pSdramAddress++;
    }

    /* Read last 16-bits if size is not 32-bits multiple */
    if ((BufferSize % 2U) != 0U)
    {
      *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU);
    }

    /* Update the SDRAM controller state */
    hsdram->State = state;

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    return  HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Writes 16-bit data buffer to SDRAM memory.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to write start address
  * @param  pSrcBuffer Pointer to source buffer to write
  * @param  BufferSize Size of the buffer to write to memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer,
                                      uint32_t BufferSize)
{
  uint32_t size;
  __IO uint32_t *psdramaddress = pAddress;
  uint16_t *psrcbuff = pSrcBuffer;

  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Write data to memory */
    for (size = BufferSize; size >= 2U ; size -= 2U)
    {
      *psdramaddress = (uint32_t)(*psrcbuff);
      psrcbuff++;
      *psdramaddress |= ((uint32_t)(*psrcbuff) << 16U);
      psrcbuff++;
      psdramaddress++;
    }

    /* Write last 16-bits if size is not 32-bits multiple */
    if ((BufferSize % 2U) != 0U)
    {
      *psdramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psdramaddress) & 0xFFFF0000U);
    }

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_READY;

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    return  HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Reads 32-bit data buffer from the SDRAM memory.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to read start address
  * @param  pDstBuffer Pointer to destination buffer
  * @param  BufferSize Size of the buffer to read from memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer,
                                     uint32_t BufferSize)
{
  uint32_t size;
  __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
  uint32_t *pdestbuff = pDstBuffer;
  HAL_SDRAM_StateTypeDef state = hsdram->State;

  /* Check the SDRAM controller state */
  if (state == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Read data from source */
    for (size = BufferSize; size != 0U; size--)
    {
      *pdestbuff = *(__IO uint32_t *)pSdramAddress;
      pdestbuff++;
      pSdramAddress++;
    }

    /* Update the SDRAM controller state */
    hsdram->State = state;

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    return  HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Writes 32-bit data buffer to SDRAM memory.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to write start address
  * @param  pSrcBuffer Pointer to source buffer to write
  * @param  BufferSize Size of the buffer to write to memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer,
                                      uint32_t BufferSize)
{
  uint32_t size;
  __IO uint32_t *pSdramAddress = pAddress;
  uint32_t *psrcbuff = pSrcBuffer;

  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Write data to memory */
    for (size = BufferSize; size != 0U; size--)
    {
      *pSdramAddress = *psrcbuff;
      psrcbuff++;
      pSdramAddress++;
    }

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_READY;

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    return  HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Reads a Words data from the SDRAM memory using DMA transfer.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to read start address
  * @param  pDstBuffer Pointer to destination buffer
  * @param  BufferSize Size of the buffer to read from memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer,
                                     uint32_t BufferSize)
{
  HAL_StatusTypeDef status;
  HAL_SDRAM_StateTypeDef state = hsdram->State;

  /* Check the SDRAM controller state */
  if (state == HAL_SDRAM_STATE_BUSY)
  {
    status = HAL_BUSY;
  }
  else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Configure DMA user callbacks */
    if (state == HAL_SDRAM_STATE_READY)
    {
      hsdram->hdma->XferCpltCallback = SDRAM_DMACplt;
    }
    else
    {
      hsdram->hdma->XferCpltCallback = SDRAM_DMACpltProt;
    }
    hsdram->hdma->XferErrorCallback = SDRAM_DMAError;

    /* Enable the DMA Stream */
    status = HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    status = HAL_ERROR;
  }

  return status;
}

/**
  * @brief  Writes a Words data buffer to SDRAM memory using DMA transfer.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  pAddress Pointer to write start address
  * @param  pSrcBuffer Pointer to source buffer to write
  * @param  BufferSize Size of the buffer to write to memory
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer,
                                      uint32_t BufferSize)
{
  HAL_StatusTypeDef status;

  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    status = HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Process Locked */
    __HAL_LOCK(hsdram);

    /* Update the SDRAM controller state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Configure DMA user callbacks */
    hsdram->hdma->XferCpltCallback = SDRAM_DMACplt;
    hsdram->hdma->XferErrorCallback = SDRAM_DMAError;

    /* Enable the DMA Stream */
    status = HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);

    /* Process Unlocked */
    __HAL_UNLOCK(hsdram);
  }
  else
  {
    status = HAL_ERROR;
  }

  return status;
}

#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
/**
  * @brief  Register a User SDRAM Callback
  *         To be used to override the weak predefined callback
  * @param hsdram : SDRAM handle
  * @param CallbackId : ID of the callback to be registered
  *        This parameter can be one of the following values:
  *          @arg @ref HAL_SDRAM_MSP_INIT_CB_ID       SDRAM MspInit callback ID
  *          @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID     SDRAM MspDeInit callback ID
  *          @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID    SDRAM Refresh Error callback ID
  * @param pCallback : pointer to the Callback function
  * @retval status
  */
HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId,
                                             pSDRAM_CallbackTypeDef pCallback)
{
  HAL_StatusTypeDef status = HAL_OK;
  HAL_SDRAM_StateTypeDef state;

  if (pCallback == NULL)
  {
    return HAL_ERROR;
  }

  state = hsdram->State;
  if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    switch (CallbackId)
    {
      case HAL_SDRAM_MSP_INIT_CB_ID :
        hsdram->MspInitCallback = pCallback;
        break;
      case HAL_SDRAM_MSP_DEINIT_CB_ID :
        hsdram->MspDeInitCallback = pCallback;
        break;
      case HAL_SDRAM_REFRESH_ERR_CB_ID :
        hsdram->RefreshErrorCallback = pCallback;
        break;
      default :
        /* update return status */
        status =  HAL_ERROR;
        break;
    }
  }
  else if (hsdram->State == HAL_SDRAM_STATE_RESET)
  {
    switch (CallbackId)
    {
      case HAL_SDRAM_MSP_INIT_CB_ID :
        hsdram->MspInitCallback = pCallback;
        break;
      case HAL_SDRAM_MSP_DEINIT_CB_ID :
        hsdram->MspDeInitCallback = pCallback;
        break;
      default :
        /* update return status */
        status =  HAL_ERROR;
        break;
    }
  }
  else
  {
    /* update return status */
    status =  HAL_ERROR;
  }

  return status;
}

/**
  * @brief  Unregister a User SDRAM Callback
  *         SDRAM Callback is redirected to the weak predefined callback
  * @param hsdram : SDRAM handle
  * @param CallbackId : ID of the callback to be unregistered
  *        This parameter can be one of the following values:
  *          @arg @ref HAL_SDRAM_MSP_INIT_CB_ID       SDRAM MspInit callback ID
  *          @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID     SDRAM MspDeInit callback ID
  *          @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID    SDRAM Refresh Error callback ID
  *          @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID  SDRAM DMA Xfer Complete callback ID
  *          @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID   SDRAM DMA Xfer Error callback ID
  * @retval status
  */
HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId)
{
  HAL_StatusTypeDef status = HAL_OK;
  HAL_SDRAM_StateTypeDef state;

  state = hsdram->State;
  if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    switch (CallbackId)
    {
      case HAL_SDRAM_MSP_INIT_CB_ID :
        hsdram->MspInitCallback = HAL_SDRAM_MspInit;
        break;
      case HAL_SDRAM_MSP_DEINIT_CB_ID :
        hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit;
        break;
      case HAL_SDRAM_REFRESH_ERR_CB_ID :
        hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback;
        break;
      case HAL_SDRAM_DMA_XFER_CPLT_CB_ID :
        hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
        break;
      case HAL_SDRAM_DMA_XFER_ERR_CB_ID :
        hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
        break;
      default :
        /* update return status */
        status =  HAL_ERROR;
        break;
    }
  }
  else if (hsdram->State == HAL_SDRAM_STATE_RESET)
  {
    switch (CallbackId)
    {
      case HAL_SDRAM_MSP_INIT_CB_ID :
        hsdram->MspInitCallback = HAL_SDRAM_MspInit;
        break;
      case HAL_SDRAM_MSP_DEINIT_CB_ID :
        hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit;
        break;
      default :
        /* update return status */
        status =  HAL_ERROR;
        break;
    }
  }
  else
  {
    /* update return status */
    status =  HAL_ERROR;
  }

  return status;
}

/**
  * @brief  Register a User SDRAM Callback for DMA transfers
  *         To be used to override the weak predefined callback
  * @param hsdram : SDRAM handle
  * @param CallbackId : ID of the callback to be registered
  *        This parameter can be one of the following values:
  *          @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID  SDRAM DMA Xfer Complete callback ID
  *          @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID   SDRAM DMA Xfer Error callback ID
  * @param pCallback : pointer to the Callback function
  * @retval status
  */
HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId,
                                                pSDRAM_DmaCallbackTypeDef pCallback)
{
  HAL_StatusTypeDef status = HAL_OK;
  HAL_SDRAM_StateTypeDef state;

  if (pCallback == NULL)
  {
    return HAL_ERROR;
  }

  /* Process locked */
  __HAL_LOCK(hsdram);

  state = hsdram->State;
  if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED))
  {
    switch (CallbackId)
    {
      case HAL_SDRAM_DMA_XFER_CPLT_CB_ID :
        hsdram->DmaXferCpltCallback = pCallback;
        break;
      case HAL_SDRAM_DMA_XFER_ERR_CB_ID :
        hsdram->DmaXferErrorCallback = pCallback;
        break;
      default :
        /* update return status */
        status =  HAL_ERROR;
        break;
    }
  }
  else
  {
    /* update return status */
    status =  HAL_ERROR;
  }

  /* Release Lock */
  __HAL_UNLOCK(hsdram);
  return status;
}
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */

/**
  * @}
  */

/** @defgroup SDRAM_Exported_Functions_Group3 Control functions
  *  @brief   management functions
  *
@verbatim
  ==============================================================================
                         ##### SDRAM Control functions #####
  ==============================================================================
  [..]
    This subsection provides a set of functions allowing to control dynamically
    the SDRAM interface.

@endverbatim
  * @{
  */

/**
  * @brief  Enables dynamically SDRAM write protection.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram)
{
  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Enable write protection */
    (void)FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank);

    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;
  }
  else
  {
    return HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Disables dynamically SDRAM write protection.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram)
{
  HAL_SDRAM_StateTypeDef state = hsdram->State;

  /* Check the SDRAM controller state */
  if (state == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (state == HAL_SDRAM_STATE_WRITE_PROTECTED)
  {
    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Disable write protection */
    (void)FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank);

    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_READY;
  }
  else
  {
    return HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Sends Command to the SDRAM bank.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  Command SDRAM command structure
  * @param  Timeout Timeout duration
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command,
                                        uint32_t Timeout)
{
  HAL_SDRAM_StateTypeDef state = hsdram->State;

  /* Check the SDRAM controller state */
  if (state == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_PRECHARGED))
  {
    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Send SDRAM command */
    (void)FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout);

    /* Update the SDRAM controller state state */
    if (Command->CommandMode == FMC_SDRAM_CMD_PALL)
    {
      hsdram->State = HAL_SDRAM_STATE_PRECHARGED;
    }
    else
    {
      hsdram->State = HAL_SDRAM_STATE_READY;
    }
  }
  else
  {
    return HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Programs the SDRAM Memory Refresh rate.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  RefreshRate The SDRAM refresh rate value
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate)
{
  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Program the refresh rate */
    (void)FMC_SDRAM_ProgramRefreshRate(hsdram->Instance, RefreshRate);

    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_READY;
  }
  else
  {
    return HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Sets the Number of consecutive SDRAM Memory auto Refresh commands.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @param  AutoRefreshNumber The SDRAM auto Refresh number
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber)
{
  /* Check the SDRAM controller state */
  if (hsdram->State == HAL_SDRAM_STATE_BUSY)
  {
    return HAL_BUSY;
  }
  else if (hsdram->State == HAL_SDRAM_STATE_READY)
  {
    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_BUSY;

    /* Set the Auto-Refresh number */
    (void)FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance, AutoRefreshNumber);

    /* Update the SDRAM state */
    hsdram->State = HAL_SDRAM_STATE_READY;
  }
  else
  {
    return HAL_ERROR;
  }

  return HAL_OK;
}

/**
  * @brief  Returns the SDRAM memory current mode.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval The SDRAM memory mode.
  */
uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram)
{
  /* Return the SDRAM memory current mode */
  return (FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank));
}

/**
  * @}
  */

/** @defgroup SDRAM_Exported_Functions_Group4 State functions
  *  @brief   Peripheral State functions
  *
@verbatim
  ==============================================================================
                      ##### SDRAM State functions #####
  ==============================================================================
  [..]
    This subsection permits to get in run-time the status of the SDRAM controller
    and the data flow.

@endverbatim
  * @{
  */

/**
  * @brief  Returns the SDRAM state.
  * @param  hsdram pointer to a SDRAM_HandleTypeDef structure that contains
  *                the configuration information for SDRAM module.
  * @retval HAL state
  */
HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram)
{
  return hsdram->State;
}

/**
  * @}
  */

/**
  * @}
  */

/** @addtogroup SDRAM_Private_Functions SDRAM Private Functions
  * @{
  */
/**
  * @brief  DMA SDRAM process complete callback.
  * @param  hdma : DMA handle
  * @retval None
  */
static void SDRAM_DMACplt(DMA_HandleTypeDef *hdma)
{
  SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent);

  /* Disable the DMA channel */
  __HAL_DMA_DISABLE(hdma);

  /* Update the SDRAM controller state */
  hsdram->State = HAL_SDRAM_STATE_READY;

#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
  hsdram->DmaXferCpltCallback(hdma);
#else
  HAL_SDRAM_DMA_XferCpltCallback(hdma);
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
}

/**
  * @brief  DMA SRAM process complete callback.
  * @param  hdma : DMA handle
  * @retval None
  */
static void SDRAM_DMACpltProt(DMA_HandleTypeDef *hdma)
{
  SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent);

  /* Disable the DMA channel */
  __HAL_DMA_DISABLE(hdma);

  /* Update the SDRAM controller state */
  hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;

#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
  hsdram->DmaXferCpltCallback(hdma);
#else
  HAL_SDRAM_DMA_XferCpltCallback(hdma);
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
}

/**
  * @brief  DMA SDRAM error callback.
  * @param  hdma : DMA handle
  * @retval None
  */
static void SDRAM_DMAError(DMA_HandleTypeDef *hdma)
{
  SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent);

  /* Disable the DMA channel */
  __HAL_DMA_DISABLE(hdma);

  /* Update the SDRAM controller state */
  hsdram->State = HAL_SDRAM_STATE_ERROR;

#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
  hsdram->DmaXferErrorCallback(hdma);
#else
  HAL_SDRAM_DMA_XferErrorCallback(hdma);
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
}

/**
  * @}
  */
/**
  * @}
  */

#endif /* HAL_SDRAM_MODULE_ENABLED */

/**
  * @}
  */

#endif /* FMC_Bank5_6 */