/* ---------------------------------------------------------------------- * Project: CMSIS DSP Library * Title: arm_add_q15.c * Description: Q15 vector addition * * $Date: 23 April 2021 * $Revision: V1.9.0 * * Target Processor: Cortex-M and Cortex-A cores * -------------------------------------------------------------------- */ /* * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "dsp/basic_math_functions.h" /** @ingroup groupMath */ /** @addtogroup BasicAdd @{ */ /** @brief Q15 vector addition. @param[in] pSrcA points to the first input vector @param[in] pSrcB points to the second input vector @param[out] pDst points to the output vector @param[in] blockSize number of samples in each vector @return none @par Scaling and Overflow Behavior The function uses saturating arithmetic. Results outside of the allowable Q15 range [0x8000 0x7FFF] are saturated. */ #if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE) #include "arm_helium_utils.h" void arm_add_q15( const q15_t * pSrcA, const q15_t * pSrcB, q15_t * pDst, uint32_t blockSize) { uint32_t blkCnt; /* loop counters */ q15x8_t vecA; q15x8_t vecB; /* Compute 8 outputs at a time */ blkCnt = blockSize >> 3; while (blkCnt > 0U) { /* * C = A + B * Add and then store the results in the destination buffer. */ vecA = vld1q(pSrcA); vecB = vld1q(pSrcB); vst1q(pDst, vqaddq(vecA, vecB)); /* * Decrement the blockSize loop counter */ blkCnt--; /* * advance vector source and destination pointers */ pSrcA += 8; pSrcB += 8; pDst += 8; } /* * tail */ blkCnt = blockSize & 7; if (blkCnt > 0U) { mve_pred16_t p0 = vctp16q(blkCnt); vecA = vld1q(pSrcA); vecB = vld1q(pSrcB); vstrhq_p(pDst, vqaddq(vecA, vecB), p0); } } #else void arm_add_q15( const q15_t * pSrcA, const q15_t * pSrcB, q15_t * pDst, uint32_t blockSize) { uint32_t blkCnt; /* Loop counter */ #if defined (ARM_MATH_LOOPUNROLL) #if defined (ARM_MATH_DSP) q31_t inA1, inA2; q31_t inB1, inB2; #endif /* Loop unrolling: Compute 4 outputs at a time */ blkCnt = blockSize >> 2U; while (blkCnt > 0U) { /* C = A + B */ #if defined (ARM_MATH_DSP) /* read 2 times 2 samples at a time from sourceA */ inA1 = read_q15x2_ia (&pSrcA); inA2 = read_q15x2_ia (&pSrcA); /* read 2 times 2 samples at a time from sourceB */ inB1 = read_q15x2_ia (&pSrcB); inB2 = read_q15x2_ia (&pSrcB); /* Add and store 2 times 2 samples at a time */ write_q15x2_ia (&pDst, __QADD16(inA1, inB1)); write_q15x2_ia (&pDst, __QADD16(inA2, inB2)); #else *pDst++ = (q15_t) __SSAT(((q31_t) *pSrcA++ + *pSrcB++), 16); *pDst++ = (q15_t) __SSAT(((q31_t) *pSrcA++ + *pSrcB++), 16); *pDst++ = (q15_t) __SSAT(((q31_t) *pSrcA++ + *pSrcB++), 16); *pDst++ = (q15_t) __SSAT(((q31_t) *pSrcA++ + *pSrcB++), 16); #endif /* Decrement loop counter */ blkCnt--; } /* Loop unrolling: Compute remaining outputs */ blkCnt = blockSize % 0x4U; #else /* Initialize blkCnt with number of samples */ blkCnt = blockSize; #endif /* #if defined (ARM_MATH_LOOPUNROLL) */ while (blkCnt > 0U) { /* C = A + B */ /* Add and store result in destination buffer. */ #if defined (ARM_MATH_DSP) *pDst++ = (q15_t) __QADD16(*pSrcA++, *pSrcB++); #else *pDst++ = (q15_t) __SSAT(((q31_t) *pSrcA++ + *pSrcB++), 16); #endif /* Decrement loop counter */ blkCnt--; } } #endif /* defined(ARM_MATH_MVEI) */ /** @} end of BasicAdd group */