48 lines
1.9 KiB
Plaintext
48 lines
1.9 KiB
Plaintext
Load "g:\\SWM32\\Origin__V0.1\\UART\\SimplUART\\out\\SimplUART.axf"
|
|
Set JLink Project File to "g:\SWM32\Origin__V0.1\UART\SimplUART\JLinkSettings.ini"* JLink Info: Device "SWM320XE" selected.
|
|
|
|
JLink info:
|
|
------------
|
|
DLL: V7.62a, compiled Feb 23 2022 16:58:13
|
|
Firmware: J-Link V9 compiled May 7 2021 16:26:12
|
|
Hardware: V9.10
|
|
S/N : 50121742
|
|
|
|
* JLink Info: Found SW-DP with ID 0x2BA01477
|
|
* JLink Info: DPIDR: 0x2BA01477
|
|
* JLink Info: CoreSight SoC-400 or earlier
|
|
* JLink Info: Scanning AP map to find all available APs
|
|
* JLink Info: AP[1]: Stopped AP scan as end of AP map has been reached
|
|
* JLink Info: AP[0]: AHB-AP (IDR: 0x24770011)
|
|
* JLink Info: Iterating through AP map to find AHB-AP to use
|
|
* JLink Info: AP[0]: Core found
|
|
* JLink Info: AP[0]: AHB-AP ROM base: 0xE00FF000
|
|
* JLink Info: CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
|
|
* JLink Info: Found Cortex-M4 r0p1, Little endian.
|
|
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
|
|
* JLink Info: CoreSight components:
|
|
* JLink Info: ROMTbl[0] @ E00FF000
|
|
* JLink Info: [0][0]: E000E000 CID B105E00D PID 000BB000 SCS
|
|
* JLink Info: [0][1]: E0001000 CID B105E00D PID 003BB002 DWT
|
|
* JLink Info: [0][2]: E0002000 CID B105E00D PID 002BB003 FPB
|
|
* JLink Info: [0][3]: E0000000 CID B105E00D PID 003BB001 ITM
|
|
* JLink Info: [0][4]: E0040000 CID B105900D PID 000BB9A1 TPIU
|
|
ROMTableAddr = 0xE00FF000
|
|
* JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET.
|
|
* JLink Info: Reset: Reset device via AIRCR.SYSRESETREQ.
|
|
|
|
Target info:
|
|
------------
|
|
Device: SWM320xE
|
|
VTarget = 3.337V
|
|
State of Pins: TCK: 0, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 0
|
|
Hardware-Breakpoints: 6
|
|
Software-Breakpoints: 8192
|
|
Watchpoints: 4
|
|
JTAG speed: 4000 kHz
|
|
|
|
Erase Done.Programming Done.Verify OK.* JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET.
|
|
* JLink Info: Reset: Reset device via AIRCR.SYSRESETREQ.
|
|
Application running ...
|
|
Flash Load finished at 22:49:59
|