45 lines
1.0 KiB
Markdown
45 lines
1.0 KiB
Markdown
|
# Example for lv_arduino using a slider
|
||
|
|
|
||
|
|
This example has the screen set to 320x480 (ILI9488), change this by altering the following lines in the main ino file:
|
||
|
|
|
||
|
|
```C
|
||
|
|
int screenWidth = 480;
|
||
|
|
int screenHeight = 320;
|
||
|
|
```
|
||
|
|
|
||
|
|
## Backlight
|
||
|
|
|
||
|
|
Change pin 32 to your preferred backlight pin using a PNP transistor (2N3906) or remove the following code and connect directly to +ve:
|
||
|
|
|
||
|
|
```C
|
||
|
|
ledcSetup(10, 5000/*freq*/, 10 /*resolution*/);
|
||
|
|
ledcAttachPin(32, 10);
|
||
|
|
analogReadResolution(10);
|
||
|
|
ledcWrite(10,768);
|
||
|
|
```
|
||
|
|
|
||
|
|
## Theme selection
|
||
|
|
|
||
|
|
Change the following to change the theme:
|
||
|
|
|
||
|
|
```C
|
||
|
|
lv_theme_t * th = lv_theme_night_init(210, NULL); //Set a HUE value and a Font for the Night Theme
|
||
|
|
lv_theme_set_current(th);
|
||
|
|
```
|
||
|
|
|
||
|
|
## Calibration
|
||
|
|
|
||
|
|
This is using the bodmer tft_espi driver for touch. To correctly set the calibration load the calibration sketch and replace the following with your values:
|
||
|
|
|
||
|
|
```C
|
||
|
|
uint16_t calData[5] = { 275, 3620, 264, 3532, 1 };
|
||
|
|
```
|
||
|
|
|
||
|
|
## Screen rotation
|
||
|
|
|
||
|
|
Check the following if you need to alter your screen rotation:
|
||
|
|
|
||
|
|
```C
|
||
|
|
tft.setRotation(3);
|
||
|
|
```
|