uboot/u-boot-stm32mp-2020.01/drivers/pch/pch9.c

87 lines
2.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014 Google, Inc
*/
#include <common.h>
#include <dm.h>
#include <pch.h>
#define GPIO_BASE 0x48
#define IO_BASE 0x4c
#define SBASE_ADDR 0x54
static int pch9_get_spi_base(struct udevice *dev, ulong *sbasep)
{
uint32_t sbase_addr;
dm_pci_read_config32(dev, SBASE_ADDR, &sbase_addr);
*sbasep = sbase_addr & 0xfffffe00;
return 0;
}
static int pch9_get_gpio_base(struct udevice *dev, u32 *gbasep)
{
u32 base;
/*
* GPIO_BASE moved to its current offset with ICH6, but prior to
* that it was unused (or undocumented). Check that it looks
* okay: not all ones or zeros.
*
* Note we don't need check bit0 here, because the Tunnel Creek
* GPIO base address register bit0 is reserved (read returns 0),
* while on the Ivybridge the bit0 is used to indicate it is an
* I/O space.
*/
dm_pci_read_config32(dev, GPIO_BASE, &base);
if (base == 0x00000000 || base == 0xffffffff) {
debug("%s: unexpected BASE value\n", __func__);
return -ENODEV;
}
/*
* Okay, I guess we're looking at the right device. The actual
* GPIO registers are in the PCI device's I/O space, starting
* at the offset that we just read. Bit 0 indicates that it's
* an I/O address, not a memory address, so mask that off.
*/
*gbasep = base & 1 ? base & ~3 : base & ~15;
return 0;
}
static int pch9_get_io_base(struct udevice *dev, u32 *iobasep)
{
u32 base;
dm_pci_read_config32(dev, IO_BASE, &base);
if (base == 0x00000000 || base == 0xffffffff) {
debug("%s: unexpected BASE value\n", __func__);
return -ENODEV;
}
*iobasep = base & 1 ? base & ~3 : base & ~15;
return 0;
}
static const struct pch_ops pch9_ops = {
.get_spi_base = pch9_get_spi_base,
.get_gpio_base = pch9_get_gpio_base,
.get_io_base = pch9_get_io_base,
};
static const struct udevice_id pch9_ids[] = {
{ .compatible = "intel,pch9" },
{ }
};
U_BOOT_DRIVER(pch9_drv) = {
.name = "intel-pch9",
.id = UCLASS_PCH,
.of_match = pch9_ids,
.ops = &pch9_ops,
};