493 lines
10 KiB
C
493 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Board functions for TI AM335X based rut board
|
|
* (C) Copyright 2013 Siemens Schweiz AG
|
|
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* u-boot:/board/ti/am335x/board.c
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <errno.h>
|
|
#include <init.h>
|
|
#include <spi.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <cpsw.h>
|
|
#include <video.h>
|
|
#include <watchdog.h>
|
|
#include "board.h"
|
|
#include "../common/factoryset.h"
|
|
#include "../../../drivers/video/da8xx-fb.h"
|
|
|
|
/*
|
|
* Read header information from EEPROM into global structure.
|
|
*/
|
|
static int read_eeprom(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static void board_init_ddr(void)
|
|
{
|
|
struct emif_regs rut_ddr3_emif_reg_data = {
|
|
.sdram_config = 0x61C04AB2,
|
|
.sdram_tim1 = 0x0888A39B,
|
|
.sdram_tim2 = 0x26337FDA,
|
|
.sdram_tim3 = 0x501F830F,
|
|
.emif_ddr_phy_ctlr_1 = 0x6,
|
|
.zq_config = 0x50074BE4,
|
|
.ref_ctrl = 0x93B,
|
|
};
|
|
|
|
struct ddr_data rut_ddr3_data = {
|
|
.datardsratio0 = 0x3b,
|
|
.datawdsratio0 = 0x85,
|
|
.datafwsratio0 = 0x100,
|
|
.datawrsratio0 = 0xc1,
|
|
};
|
|
|
|
struct cmd_control rut_ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = 0x40,
|
|
.cmd0iclkout = 1,
|
|
.cmd1csratio = 0x40,
|
|
.cmd1iclkout = 1,
|
|
.cmd2csratio = 0x40,
|
|
.cmd2iclkout = 1,
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs = {
|
|
.cm0ioctl = RUT_IOCTRL_VAL,
|
|
.cm1ioctl = RUT_IOCTRL_VAL,
|
|
.cm2ioctl = RUT_IOCTRL_VAL,
|
|
.dt0ioctl = RUT_IOCTRL_VAL,
|
|
.dt1ioctl = RUT_IOCTRL_VAL,
|
|
};
|
|
|
|
config_ddr(DDR_PLL_FREQ, &ioregs, &rut_ddr3_data,
|
|
&rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0);
|
|
}
|
|
|
|
static int request_and_pulse_reset(int gpio, const char *name)
|
|
{
|
|
int ret;
|
|
const int delay_us = 2000; /* 2ms */
|
|
|
|
ret = gpio_request(gpio, name);
|
|
if (ret < 0) {
|
|
printf("%s: Unable to request %s\n", __func__, name);
|
|
goto err;
|
|
}
|
|
|
|
ret = gpio_direction_output(gpio, 0);
|
|
if (ret < 0) {
|
|
printf("%s: Unable to set %s as output\n", __func__, name);
|
|
goto err_free_gpio;
|
|
}
|
|
|
|
udelay(delay_us);
|
|
|
|
gpio_set_value(gpio, 1);
|
|
|
|
return 0;
|
|
|
|
err_free_gpio:
|
|
gpio_free(gpio);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio))
|
|
#define ETH_PHY_RESET_GPIO GPIO_TO_PIN(2, 18)
|
|
#define MAXTOUCH_RESET_GPIO GPIO_TO_PIN(3, 18)
|
|
#define DISPLAY_RESET_GPIO GPIO_TO_PIN(3, 19)
|
|
|
|
#define REQUEST_AND_PULSE_RESET(N) \
|
|
request_and_pulse_reset(N, #N);
|
|
|
|
static void spl_siemens_board_init(void)
|
|
{
|
|
REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
|
|
REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
|
|
REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO);
|
|
}
|
|
#endif /* if def CONFIG_SPL_BUILD */
|
|
|
|
#if defined(CONFIG_DRIVER_TI_CPSW)
|
|
static void cpsw_control(int enabled)
|
|
{
|
|
/* VTP can be added here */
|
|
|
|
return;
|
|
}
|
|
|
|
static struct cpsw_slave_data cpsw_slaves[] = {
|
|
{
|
|
.slave_reg_ofs = 0x208,
|
|
.sliver_reg_ofs = 0xd80,
|
|
.phy_addr = 1,
|
|
.phy_if = PHY_INTERFACE_MODE_RMII,
|
|
},
|
|
{
|
|
.slave_reg_ofs = 0x308,
|
|
.sliver_reg_ofs = 0xdc0,
|
|
.phy_addr = 0,
|
|
.phy_if = PHY_INTERFACE_MODE_RMII,
|
|
},
|
|
};
|
|
|
|
static struct cpsw_platform_data cpsw_data = {
|
|
.mdio_base = CPSW_MDIO_BASE,
|
|
.cpsw_base = CPSW_BASE,
|
|
.mdio_div = 0xff,
|
|
.channels = 8,
|
|
.cpdma_reg_ofs = 0x800,
|
|
.slaves = 1,
|
|
.slave_data = cpsw_slaves,
|
|
.ale_reg_ofs = 0xd00,
|
|
.ale_entries = 1024,
|
|
.host_port_reg_ofs = 0x108,
|
|
.hw_stats_reg_ofs = 0x900,
|
|
.bd_ram_ofs = 0x2000,
|
|
.mac_control = (1 << 5),
|
|
.control = cpsw_control,
|
|
.host_port_num = 0,
|
|
.version = CPSW_CTRL_VERSION_2,
|
|
};
|
|
|
|
#if defined(CONFIG_DRIVER_TI_CPSW) || \
|
|
(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
int n = 0;
|
|
int rv;
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
factoryset_env_set();
|
|
#endif
|
|
|
|
/* Set rgmii mode and enable rmii clock to be sourced from chip */
|
|
writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
|
|
|
|
rv = cpsw_register(&cpsw_data);
|
|
if (rv < 0)
|
|
printf("Error %d registering CPSW switch\n", rv);
|
|
else
|
|
n += rv;
|
|
return n;
|
|
}
|
|
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
|
|
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
|
|
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
static bool hw_watchdog_init_done;
|
|
static int hw_watchdog_trigger_level;
|
|
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
if (!hw_watchdog_init_done)
|
|
return;
|
|
|
|
hw_watchdog_trigger_level = hw_watchdog_trigger_level ? 0 : 1;
|
|
gpio_set_value(WATCHDOG_TRIGGER_GPIO, hw_watchdog_trigger_level);
|
|
}
|
|
|
|
void hw_watchdog_init(void)
|
|
{
|
|
gpio_request(WATCHDOG_TRIGGER_GPIO, "watchdog_trigger");
|
|
gpio_direction_output(WATCHDOG_TRIGGER_GPIO, hw_watchdog_trigger_level);
|
|
|
|
hw_watchdog_reset();
|
|
|
|
hw_watchdog_init_done = 1;
|
|
}
|
|
#endif /* defined(CONFIG_HW_WATCHDOG) */
|
|
|
|
#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
|
|
static struct da8xx_panel lcd_panels[] = {
|
|
/* FORMIKE, 4.3", 480x800, KWH043MC17-F01 */
|
|
[0] = {
|
|
.name = "KWH043MC17-F01",
|
|
.width = 480,
|
|
.height = 800,
|
|
.hfp = 50, /* no spec, "don't care" values */
|
|
.hbp = 50,
|
|
.hsw = 50,
|
|
.vfp = 50,
|
|
.vbp = 50,
|
|
.vsw = 50,
|
|
.pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */
|
|
.invert_pxl_clk = 1,
|
|
},
|
|
/* FORMIKE, 4.3", 480x800, KWH043ST20-F01 */
|
|
[1] = {
|
|
.name = "KWH043ST20-F01",
|
|
.width = 480,
|
|
.height = 800,
|
|
.hfp = 50, /* no spec, "don't care" values */
|
|
.hbp = 50,
|
|
.hsw = 50,
|
|
.vfp = 50,
|
|
.vbp = 50,
|
|
.vsw = 50,
|
|
.pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */
|
|
.invert_pxl_clk = 1,
|
|
},
|
|
/* Multi-Inno, 4.3", 480x800, MI0430VT-1 */
|
|
[2] = {
|
|
.name = "MI0430VT-1",
|
|
.width = 480,
|
|
.height = 800,
|
|
.hfp = 50, /* no spec, "don't care" values */
|
|
.hbp = 50,
|
|
.hsw = 50,
|
|
.vfp = 50,
|
|
.vbp = 50,
|
|
.vsw = 50,
|
|
.pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */
|
|
.invert_pxl_clk = 1,
|
|
},
|
|
};
|
|
|
|
static const struct display_panel disp_panels[] = {
|
|
[0] = {
|
|
WVGA,
|
|
16, /* RGB 888 */
|
|
16,
|
|
COLOR_ACTIVE,
|
|
},
|
|
[1] = {
|
|
WVGA,
|
|
16, /* RGB 888 */
|
|
16,
|
|
COLOR_ACTIVE,
|
|
},
|
|
[2] = {
|
|
WVGA,
|
|
24, /* RGB 888 */
|
|
16,
|
|
COLOR_ACTIVE,
|
|
},
|
|
};
|
|
|
|
static const struct lcd_ctrl_config lcd_cfgs[] = {
|
|
[0] = {
|
|
&disp_panels[0],
|
|
.ac_bias = 255,
|
|
.ac_bias_intrpt = 0,
|
|
.dma_burst_sz = 16,
|
|
.bpp = 16,
|
|
.fdd = 0x80,
|
|
.tft_alt_mode = 0,
|
|
.stn_565_mode = 0,
|
|
.mono_8bit_mode = 0,
|
|
.invert_line_clock = 1,
|
|
.invert_frm_clock = 1,
|
|
.sync_edge = 0,
|
|
.sync_ctrl = 1,
|
|
.raster_order = 0,
|
|
},
|
|
[1] = {
|
|
&disp_panels[1],
|
|
.ac_bias = 255,
|
|
.ac_bias_intrpt = 0,
|
|
.dma_burst_sz = 16,
|
|
.bpp = 16,
|
|
.fdd = 0x80,
|
|
.tft_alt_mode = 0,
|
|
.stn_565_mode = 0,
|
|
.mono_8bit_mode = 0,
|
|
.invert_line_clock = 1,
|
|
.invert_frm_clock = 1,
|
|
.sync_edge = 0,
|
|
.sync_ctrl = 1,
|
|
.raster_order = 0,
|
|
},
|
|
[2] = {
|
|
&disp_panels[2],
|
|
.ac_bias = 255,
|
|
.ac_bias_intrpt = 0,
|
|
.dma_burst_sz = 16,
|
|
.bpp = 24,
|
|
.fdd = 0x80,
|
|
.tft_alt_mode = 0,
|
|
.stn_565_mode = 0,
|
|
.mono_8bit_mode = 0,
|
|
.invert_line_clock = 1,
|
|
.invert_frm_clock = 1,
|
|
.sync_edge = 0,
|
|
.sync_ctrl = 1,
|
|
.raster_order = 0,
|
|
},
|
|
|
|
};
|
|
|
|
/* no console on this board */
|
|
int board_cfb_skip(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
#define PLL_GET_M(v) ((v >> 8) & 0x7ff)
|
|
#define PLL_GET_N(v) (v & 0x7f)
|
|
|
|
static struct dpll_regs dpll_lcd_regs = {
|
|
.cm_clkmode_dpll = CM_WKUP + 0x98,
|
|
.cm_idlest_dpll = CM_WKUP + 0x48,
|
|
.cm_clksel_dpll = CM_WKUP + 0x54,
|
|
};
|
|
|
|
static int get_clk(struct dpll_regs *dpll_regs)
|
|
{
|
|
unsigned int val;
|
|
unsigned int m, n;
|
|
int f = 0;
|
|
|
|
val = readl(dpll_regs->cm_clksel_dpll);
|
|
m = PLL_GET_M(val);
|
|
n = PLL_GET_N(val);
|
|
f = (m * V_OSCK) / n;
|
|
|
|
return f;
|
|
};
|
|
|
|
int clk_get(int clk)
|
|
{
|
|
return get_clk(&dpll_lcd_regs);
|
|
};
|
|
|
|
static int conf_disp_pll(int m, int n)
|
|
{
|
|
struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
|
|
struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1};
|
|
#if defined(DISPL_PLL_SPREAD_SPECTRUM)
|
|
struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
|
|
#endif
|
|
|
|
u32 *const clk_domains[] = {
|
|
&cmper->lcdclkctrl,
|
|
0
|
|
};
|
|
u32 *const clk_modules_explicit_en[] = {
|
|
&cmper->lcdclkctrl,
|
|
&cmper->lcdcclkstctrl,
|
|
&cmper->spi1clkctrl,
|
|
0
|
|
};
|
|
do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
|
|
|
|
do_setup_dpll(&dpll_lcd_regs, &dpll_lcd);
|
|
|
|
#if defined(DISPL_PLL_SPREAD_SPECTRUM)
|
|
writel(0x64, &cmwkup->resv6[3]); /* 0x50 */
|
|
writel(0x800, &cmwkup->resv6[2]); /* 0x4c */
|
|
writel(readl(&cmwkup->clkmoddplldisp) | CM_CLKMODE_DPLL_SSC_EN_MASK,
|
|
&cmwkup->clkmoddplldisp); /* 0x98 */
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int set_gpio(int gpio, int state)
|
|
{
|
|
gpio_request(gpio, "temp");
|
|
gpio_direction_output(gpio, state);
|
|
gpio_set_value(gpio, state);
|
|
gpio_free(gpio);
|
|
return 0;
|
|
}
|
|
|
|
static int enable_lcd(void)
|
|
{
|
|
unsigned char buf[1];
|
|
|
|
set_gpio(BOARD_LCD_RESET, 0);
|
|
mdelay(1);
|
|
set_gpio(BOARD_LCD_RESET, 1);
|
|
mdelay(1);
|
|
|
|
/* spi lcd init */
|
|
kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0);
|
|
|
|
/* backlight on */
|
|
buf[0] = 0xf;
|
|
i2c_write(0x24, 0x7, 1, buf, 1);
|
|
buf[0] = 0x3f;
|
|
i2c_write(0x24, 0x8, 1, buf, 1);
|
|
return 0;
|
|
}
|
|
|
|
int arch_early_init_r(void)
|
|
{
|
|
enable_lcd();
|
|
return 0;
|
|
}
|
|
|
|
static int board_video_init(void)
|
|
{
|
|
int i;
|
|
int anzdisp = ARRAY_SIZE(lcd_panels);
|
|
int display = 1;
|
|
|
|
for (i = 0; i < anzdisp; i++) {
|
|
if (strncmp((const char *)factory_dat.disp_name,
|
|
lcd_panels[i].name,
|
|
strlen((const char *)factory_dat.disp_name)) == 0) {
|
|
printf("DISPLAY: %s\n", factory_dat.disp_name);
|
|
break;
|
|
}
|
|
}
|
|
if (i == anzdisp) {
|
|
i = 1;
|
|
printf("%s: %s not found, using default %s\n", __func__,
|
|
factory_dat.disp_name, lcd_panels[i].name);
|
|
}
|
|
conf_disp_pll(24, 1);
|
|
da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display],
|
|
lcd_cfgs[display].bpp);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* ifdef CONFIG_VIDEO */
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
int ret;
|
|
char tmp[2 * MAX_STRING_LENGTH + 2];
|
|
|
|
omap_nand_switch_ecc(1, 8);
|
|
|
|
if (factory_dat.asn[0] != 0)
|
|
sprintf(tmp, "%s_%s", factory_dat.asn,
|
|
factory_dat.comp_version);
|
|
else
|
|
strcpy(tmp, "QMX7.E38_4.0");
|
|
|
|
ret = env_set("boardid", tmp);
|
|
if (ret)
|
|
printf("error setting board id\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#include "../common/board.c"
|