stm32mp157
/
uboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
uboot/u-boot-stm32mp-2020.01/board/samsung/trats/trats.c

474 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Samsung Electronics
* Heungjun Kim <riverful.kim@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
* Donghwa Lee <dh09.lee@samsung.com>
*/
#include <common.h>
#include <env.h>
#include <lcd.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/clock.h>
#include <asm/arch/mipi_dsim.h>
#include <asm/arch/watchdog.h>
#include <asm/arch/power.h>
#include <power/pmic.h>
#include <usb/dwc2_udc.h>
#include <power/max8997_pmic.h>
#include <power/max8997_muic.h>
#include <power/battery.h>
#include <power/max17042_fg.h>
#include <power/pmic.h>
#include <libtizen.h>
#include <usb.h>
#include <usb_mass_storage.h>
#include "setup.h"
unsigned int board_rev;
#ifdef CONFIG_REVISION_TAG
u32 get_board_rev(void)
{
return board_rev;
}
#endif
static void check_hw_revision(void);
struct dwc2_plat_otg_data s5pc210_otg_data;
int exynos_init(void)
{
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
return 0;
}
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
static void trats_low_power_mode(void)
{
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
struct exynos4_power *pwr =
(struct exynos4_power *)samsung_get_base_power();
/* Power down CORE1 */
/* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */
writel(0x0, &pwr->arm_core1_configuration);
/* Change the APLL frequency */
/* ENABLE (1 enable) | LOCKED (1 locked) */
/* [31] | [29] */
/* FSEL | MDIV | PDIV | SDIV */
/* [27] | [25:16] | [13:8] | [2:0] */
writel(0xa0c80604, &clk->apll_con0);
/* Change CPU0 clock divider */
/* CORE2_RATIO | APLL_RATIO | PCLK_DBG_RATIO | ATB_RATIO */
/* [30:28] | [26:24] | [22:20] | [18:16] */
/* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO | CORE_RATIO */
/* [14:12] | [10:8] | [6:4] | [2:0] */
writel(0x00000100, &clk->div_cpu0);
/* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */
while (readl(&clk->div_stat_cpu0) & 0x1111111)
continue;
/* Change clock divider ratio for DMC */
/* DMCP_RATIO | DMCD_RATIO */
/* [22:20] | [18:16] */
/* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO | ACP_RATIO */
/* [14:12] | [10:8] | [6:4] | [2:0] */
writel(0x13113117, &clk->div_dmc0);
/* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */
while (readl(&clk->div_stat_dmc0) & 0x11111111)
continue;
/* Turn off unnecessary power domains */
writel(0x0, &pwr->xxti_configuration); /* XXTI */
writel(0x0, &pwr->cam_configuration); /* CAM */
writel(0x0, &pwr->tv_configuration); /* TV */
writel(0x0, &pwr->mfc_configuration); /* MFC */
writel(0x0, &pwr->g3d_configuration); /* G3D */
writel(0x0, &pwr->gps_configuration); /* GPS */
writel(0x0, &pwr->gps_alive_configuration); /* GPS_ALIVE */
/* Turn off unnecessary clocks */
writel(0x0, &clk->gate_ip_cam); /* CAM */
writel(0x0, &clk->gate_ip_tv); /* TV */
writel(0x0, &clk->gate_ip_mfc); /* MFC */
writel(0x0, &clk->gate_ip_g3d); /* G3D */
writel(0x0, &clk->gate_ip_image); /* IMAGE */
writel(0x0, &clk->gate_ip_gps); /* GPS */
}
#endif
int exynos_power_init(void)
{
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int chrg, ret;
struct power_battery *pb;
struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
/*
* For PMIC/MUIC the I2C bus is named as I2C5, but it is connected
* to logical I2C adapter 0
*
* The FUEL_GAUGE is marked as I2C9 on the schematic, but connected
* to logical I2C adapter 1
*/
ret = power_fg_init(I2C_9);
ret |= power_muic_init(I2C_5);
ret |= power_bat_init(0);
if (ret)
return ret;
p_fg = pmic_get("MAX17042_FG");
if (!p_fg) {
puts("MAX17042_FG: Not found\n");
return -ENODEV;
}
p_chrg = pmic_get("MAX8997_PMIC");
if (!p_chrg) {
puts("MAX8997_PMIC: Not found\n");
return -ENODEV;
}
p_muic = pmic_get("MAX8997_MUIC");
if (!p_muic) {
puts("MAX8997_MUIC: Not found\n");
return -ENODEV;
}
p_bat = pmic_get("BAT_TRATS");
if (!p_bat) {
puts("BAT_TRATS: Not found\n");
return -ENODEV;
}
p_fg->parent = p_bat;
p_chrg->parent = p_bat;
p_muic->parent = p_bat;
p_bat->low_power_mode = trats_low_power_mode;
p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
pb = p_bat->pbat;
chrg = p_muic->chrg->chrg_type(p_muic);
debug("CHARGER TYPE: %d\n", chrg);
if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
puts("No battery detected\n");
return 0;
}
p_fg->fg->fg_battery_check(p_fg, p_bat);
if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
puts("CHARGE Battery !\n");
#endif
return 0;
}
static unsigned int get_hw_revision(void)
{
int hwrev = 0;
char str[10];
int i;
/* hw_rev[3:0] == GPE1[3:0] */
for (i = 0; i < 4; i++) {
int pin = i + EXYNOS4_GPIO_E10;
sprintf(str, "hw_rev%d", i);
gpio_request(pin, str);
gpio_cfg_pin(pin, S5P_GPIO_INPUT);
gpio_set_pull(pin, S5P_GPIO_PULL_NONE);
}
udelay(1);
for (i = 0; i < 4; i++)
hwrev |= (gpio_get_value(EXYNOS4_GPIO_E10 + i) << i);
debug("hwrev 0x%x\n", hwrev);
return hwrev;
}
static void check_hw_revision(void)
{
int hwrev;
hwrev = get_hw_revision();
board_rev |= hwrev;
}
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
struct udevice *dev;
int reg, ret;
ret = pmic_get("max8997-pmic", &dev);
if (ret)
return ret;
if (on) {
reg = pmic_reg_read(dev, MAX8997_REG_SAFEOUTCTRL);
reg |= ENSAFEOUT1;
ret = pmic_reg_write(dev, MAX8997_REG_SAFEOUTCTRL, reg);
if (ret) {
puts("MAX8997 setting error!\n");
return ret;
}
reg = pmic_reg_read(dev, MAX8997_REG_LDO3CTRL);
reg |= EN_LDO;
ret = pmic_reg_write(dev, MAX8997_REG_LDO3CTRL, reg);
if (ret) {
puts("MAX8997 setting error!\n");
return ret;
}
reg = pmic_reg_read(dev, MAX8997_REG_LDO8CTRL);
reg |= EN_LDO;
ret = pmic_reg_write(dev, MAX8997_REG_LDO8CTRL, reg);
if (ret) {
puts("MAX8997 setting error!\n");
return ret;
}
} else {
reg = pmic_reg_read(dev, MAX8997_REG_LDO8CTRL);
reg &= DIS_LDO;
ret = pmic_reg_write(dev, MAX8997_REG_LDO8CTRL, reg);
if (ret) {
puts("MAX8997 setting error!\n");
return ret;
}
reg = pmic_reg_read(dev, MAX8997_REG_LDO3CTRL);
reg &= DIS_LDO;
ret = pmic_reg_write(dev, MAX8997_REG_LDO3CTRL, reg);
if (ret) {
puts("MAX8997 setting error!\n");
return ret;
}
reg = pmic_reg_read(dev, MAX8997_REG_SAFEOUTCTRL);
reg &= ~ENSAFEOUT1;
ret = pmic_reg_write(dev, MAX8997_REG_SAFEOUTCTRL, reg);
if (ret) {
puts("MAX8997 setting error!\n");
return ret;
}
}
return 0;
}
struct dwc2_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4_USBPHY_BASE,
.regs_otg = EXYNOS4_USBOTG_BASE,
.usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
.usb_flags = PHY0_SLEEP,
};
int board_usb_init(int index, enum usb_init_type init)
{
debug("USB_udc_probe\n");
return dwc2_udc_probe(&s5pc210_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *muic = pmic_get("MAX8997_MUIC");
if (!muic)
return 0;
return !!muic->chrg->chrg_type(muic);
#else
return false;
#endif
}
#endif
static void pmic_reset(void)
{
gpio_direction_output(EXYNOS4_GPIO_X07, 1);
gpio_set_pull(EXYNOS4_GPIO_X27, S5P_GPIO_PULL_NONE);
}
static void board_clock_init(void)
{
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu);
writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0);
writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys);
writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0);
writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0);
writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1);
writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0);
writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1);
writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus);
writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus);
writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top);
writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1);
writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2);
writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3);
writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0);
writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3);
writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock);
writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock);
writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock);
writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock);
writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1);
writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0);
writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1);
writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0);
writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1);
writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0);
writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1);
writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0);
writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam);
writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv);
writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc);
writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d);
writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image);
writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0);
writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1);
writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys);
writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps);
writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril);
writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir);
writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block);
}
static void board_power_init(void)
{
struct exynos4_power *pwr =
(struct exynos4_power *)samsung_get_base_power();
/* PS HOLD */
writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control);
/* Set power down */
writel(0, (unsigned int)&pwr->cam_configuration);
writel(0, (unsigned int)&pwr->tv_configuration);
writel(0, (unsigned int)&pwr->mfc_configuration);
writel(0, (unsigned int)&pwr->g3d_configuration);
writel(0, (unsigned int)&pwr->lcd1_configuration);
writel(0, (unsigned int)&pwr->gps_configuration);
writel(0, (unsigned int)&pwr->gps_alive_configuration);
/* It is necessary to power down core 1 */
/* to successfully boot CPU1 in kernel */
writel(0, (unsigned int)&pwr->arm_core1_configuration);
}
static void exynos_uart_init(void)
{
/* UART_SEL GPY4[7] (part2) at EXYNOS4 */
gpio_request(EXYNOS4_GPIO_Y47, "uart_sel");
gpio_set_pull(EXYNOS4_GPIO_Y47, S5P_GPIO_PULL_UP);
gpio_direction_output(EXYNOS4_GPIO_Y47, 1);
}
int exynos_early_init_f(void)
{
wdt_stop();
pmic_reset();
board_clock_init();
exynos_uart_init();
board_power_init();
return 0;
}
void exynos_reset_lcd(void)
{
gpio_request(EXYNOS4_GPIO_Y45, "lcd_reset");
gpio_direction_output(EXYNOS4_GPIO_Y45, 1);
udelay(10000);
gpio_direction_output(EXYNOS4_GPIO_Y45, 0);
udelay(10000);
gpio_direction_output(EXYNOS4_GPIO_Y45, 1);
}
int lcd_power(void)
{
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
struct pmic *p = pmic_get("MAX8997_PMIC");
if (!p)
return -ENODEV;
if (pmic_probe(p))
return 0;
/* LDO15 voltage: 2.2v */
ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, 0x1c | EN_LDO);
/* LDO13 voltage: 3.0v */
ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, 0x2c | EN_LDO);
if (ret) {
puts("MAX8997 LDO setting error!\n");
return -1;
}
#endif
return 0;
}
int mipi_power(void)
{
#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
struct pmic *p = pmic_get("MAX8997_PMIC");
if (!p)
return -ENODEV;
if (pmic_probe(p))
return 0;
/* LDO3 voltage: 1.1v */
ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, 0x6 | EN_LDO);
/* LDO4 voltage: 1.8v */
ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, 0x14 | EN_LDO);
if (ret) {
puts("MAX8997 LDO setting error!\n");
return -1;
}
#endif
return 0;
}
#ifdef CONFIG_LCD
void exynos_lcd_misc_init(vidinfo_t *vid)
{
#ifdef CONFIG_TIZEN
get_tizen_logo_info(vid);
#endif
#ifdef CONFIG_S6E8AX0
s6e8ax0_init();
env_set("lcdinfo", "lcd=s6e8ax0");
#endif
}
#endif
Reference in New Issue View Git Blame Copy Permalink