uboot/u-boot-stm32mp-2020.01/board/nvidia/nyan-big
chenyf 996bded6bb 1 2024-01-10 14:52:34 +08:00
..
Kconfig 1 2024-01-10 14:52:34 +08:00
MAINTAINERS 1 2024-01-10 14:52:34 +08:00
Makefile 1 2024-01-10 14:52:34 +08:00
README 1 2024-01-10 14:52:34 +08:00
nyan-big.c 1 2024-01-10 14:52:34 +08:00
pinmux-config-nyan-big.h 1 2024-01-10 14:52:34 +08:00

README

# SPDX-License-Identifier: GPL-2.0+
#
# Copyright 2018 Google LLC
# Written by Simon Glass <sjg@chromium.org>

U-Boot on Nyan
==============

Nyan-big is supported by mainline U-Boot. This device is based on Tegra124.
To build it, use the nyan-big config.

To boot it, connect a USB A-A cable from your computer to the back USB port.
Connect a servo board. Then with t20_rec and warn_rst held down:

   sudo tegrarcm --bct cbootimage-configs/tegra124/nvidia/norrin/PM370_Hynix_2GB_H5TC4G63AFR_PBA_924MHz_01212014.bct
	    --bootloader u-boot-dtb-tegra.bin --loadaddr 0x80108000

The norrin config is close enough that it works well with Nyan.