uboot/u-boot-stm32mp-2020.01/board/freescale/t104xrdb/diu.c

84 lines
2.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Author: Priyanka Jain <Priyanka.Jain@freescale.com>
*/
#include <asm/io.h>
#include <common.h>
#include <command.h>
#include <fsl_diu_fb.h>
#include <linux/ctype.h>
#include <video_fb.h>
#include "../common/diu_ch7301.h"
#include "cpld.h"
#include "t104xrdb.h"
/*
* DIU Area Descriptor
*
* Note that we need to byte-swap the value before it's written to the AD
* register. So even though the registers don't look like they're in the same
* bit positions as they are on the MPC8610, the same value is written to the
* AD register on the MPC8610 and on the P1022.
*/
#define AD_BYTE_F 0x10000000
#define AD_ALPHA_C_SHIFT 25
#define AD_BLUE_C_SHIFT 23
#define AD_GREEN_C_SHIFT 21
#define AD_RED_C_SHIFT 19
#define AD_PIXEL_S_SHIFT 16
#define AD_COMP_3_SHIFT 12
#define AD_COMP_2_SHIFT 8
#define AD_COMP_1_SHIFT 4
#define AD_COMP_0_SHIFT 0
void diu_set_pixel_clock(unsigned int pixclock)
{
unsigned long speed_ccb, temp;
u32 pixval;
int ret;
speed_ccb = get_bus_freq(0);
temp = 1000000000 / pixclock;
temp *= 1000;
pixval = speed_ccb / temp;
/* Program HDMI encoder */
ret = diu_set_dvi_encoder(temp);
if (ret) {
puts("Failed to set DVI encoder\n");
return;
}
/* Program pixel clock */
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
((pixval << PXCK_BITS_START) & PXCK_MASK));
/* enable clock*/
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
((pixval << PXCK_BITS_START) & PXCK_MASK));
}
int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
{
u32 pixel_format;
u8 sw;
/*Configure Display ouput port as HDMI*/
sw = CPLD_READ(sfp_ctl_status);
CPLD_WRITE(sfp_ctl_status , sw & ~(CPLD_DIU_SEL_DFP));
pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
(2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
(8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
(8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
printf("DIU: Switching to monitor DVI @ %ux%u\n", xres, yres);
return fsl_diu_init(xres, yres, pixel_format, 0);
}