uboot/u-boot-stm32mp-2020.01/board/freescale/mpc8349emds/pci.c

191 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*/
#include <init.h>
#include <asm/mmu.h>
#include <asm/io.h>
#include <common.h>
#include <mpc83xx.h>
#include <pci.h>
#include <i2c.h>
#include <asm/fsl_i2c.h>
static struct pci_region pci1_regions[] = {
{
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
size: CONFIG_SYS_PCI1_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI1_IO_BASE,
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
size: CONFIG_SYS_PCI1_IO_SIZE,
flags: PCI_REGION_IO
},
{
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
size: CONFIG_SYS_PCI1_MMIO_SIZE,
flags: PCI_REGION_MEM
},
};
#ifdef CONFIG_MPC83XX_PCI2
static struct pci_region pci2_regions[] = {
{
bus_start: CONFIG_SYS_PCI2_MEM_BASE,
phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
size: CONFIG_SYS_PCI2_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI2_IO_BASE,
phys_start: CONFIG_SYS_PCI2_IO_PHYS,
size: CONFIG_SYS_PCI2_IO_SIZE,
flags: PCI_REGION_IO
},
{
bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
size: CONFIG_SYS_PCI2_MMIO_SIZE,
flags: PCI_REGION_MEM
},
};
#endif
#ifndef CONFIG_PCISLAVE
void pib_init(void)
{
u8 val8, orig_i2c_bus;
/*
* Assign PIB PMC slot to desired PCI bus
*/
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(1);
val8 = 0;
i2c_write(0x23, 0x6, 1, &val8, 1);
i2c_write(0x23, 0x7, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x23, 0x2, 1, &val8, 1);
i2c_write(0x23, 0x3, 1, &val8, 1);
val8 = 0;
i2c_write(0x26, 0x6, 1, &val8, 1);
val8 = 0x34;
i2c_write(0x26, 0x7, 1, &val8, 1);
#if defined(CONFIG_PCI_64BIT)
val8 = 0xf4; /* PMC2:PCI1/64-bit */
#elif defined(CONFIG_PCI_ALL_PCI1)
val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
#elif defined(CONFIG_PCI_ONE_PCI1)
val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
#else
val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
#endif
i2c_write(0x26, 0x2, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x26, 0x3, 1, &val8, 1);
val8 = 0;
i2c_write(0x27, 0x6, 1, &val8, 1);
i2c_write(0x27, 0x7, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x27, 0x2, 1, &val8, 1);
val8 = 0xef;
i2c_write(0x27, 0x3, 1, &val8, 1);
asm("eieio");
#if defined(CONFIG_PCI_64BIT)
printf("PCI1: 64-bit on PMC2\n");
#elif defined(CONFIG_PCI_ALL_PCI1)
printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
#elif defined(CONFIG_PCI_ONE_PCI1)
printf("PCI1: 32-bit on PMC1\n");
printf("PCI2: 32-bit on PMC2, PMC3\n");
#else
printf("PCI1: 32-bit on PMC1, PMC2\n");
printf("PCI2: 32-bit on PMC3\n");
#endif
/* Reset to original I2C bus */
i2c_set_bus_num(orig_i2c_bus);
}
void pci_init_board(void)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
#ifndef CONFIG_MPC83XX_PCI2
struct pci_region *reg[] = { pci1_regions };
#else
struct pci_region *reg[] = { pci1_regions, pci2_regions };
#endif
/* initialize the PCA9555PW IO expander on the PIB board */
pib_init();
/* Enable all 8 PCI_CLK_OUTPUTS */
clk->occr = 0xff000000;
udelay(2000);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
udelay(2000);
#ifndef CONFIG_MPC83XX_PCI2
mpc83xx_pci_init(1, reg);
#else
mpc83xx_pci_init(2, reg);
#endif
}
#else
void pci_init_board(void)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0];
struct pci_region *reg[] = { pci1_regions };
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
mpc83xx_pci_init(1, reg);
/* Configure PCI Inbound Translation Windows (3 1MB windows) */
pci_ctrl->pitar0 = 0x0;
pci_ctrl->pibar0 = 0x0;
pci_ctrl->piwar0 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | PIWAR_IWS_1M;
pci_ctrl->pitar1 = 0x0;
pci_ctrl->pibar1 = 0x0;
pci_ctrl->piebar1 = 0x0;
pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | PIWAR_IWS_1M;
pci_ctrl->pitar2 = 0x0;
pci_ctrl->pibar2 = 0x0;
pci_ctrl->piebar2 = 0x0;
pci_ctrl->piwar2 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | PIWAR_IWS_1M;
/* Unlock the configuration bit */
mpc83xx_pcislave_unlock(0);
printf("PCI: Agent mode enabled\n");
}
#endif /* CONFIG_PCISLAVE */