uboot/u-boot-stm32mp-2020.01/board/armltd/integrator/timer.c

164 lines
3.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*/
#include <common.h>
#include <div64.h>
#include <time.h>
#ifdef CONFIG_ARCH_CINTEGRATOR
#define DIV_CLOCK_INIT 1
#define TIMER_LOAD_VAL 0xFFFFFFFFL
#else
#define DIV_CLOCK_INIT 256
#define TIMER_LOAD_VAL 0x0000FFFFL
#endif
/* The Integrator/CP timer1 is clocked at 1MHz
* can be divided by 16 or 256
* and can be set up as a 32-bit timer
*/
/* U-Boot expects a 32 bit timer, running at CONFIG_SYS_HZ */
/* Keep total timer count to avoid losing decrements < div_timer */
static unsigned long long total_count = 0;
static unsigned long long lastdec; /* Timer reading at last call */
/* Divisor applied to timer clock */
static unsigned long long div_clock = DIV_CLOCK_INIT;
static unsigned long long div_timer = 1; /* Divisor to convert timer reading
* change to U-Boot ticks
*/
/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
static ulong timestamp; /* U-Boot ticks since startup */
#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
* - unless otherwise stated
*/
/* starts up a counter
* - the Integrator/CP timer can be set up to issue an interrupt */
int timer_init (void)
{
/* Load timer with initial value */
*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
#ifdef CONFIG_ARCH_CINTEGRATOR
/* Set timer to be
* enabled 1
* periodic 1
* no interrupts 0
* X 0
* divider 1 00 == less rounding error
* 32 bit 1
* wrapping 0
*/
*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2;
#else
/* Set timer to be
* enabled 1
* free-running 0
* XX 00
* divider 256 10
* XX 00
*/
*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
#endif
/* init the timestamp */
total_count = 0ULL;
/* capure current decrementer value */
lastdec = READ_TIMER;
/* start "advancing" time stamp from 0 */
timestamp = 0L;
div_timer = CONFIG_SYS_HZ_CLOCK;
do_div(div_timer, CONFIG_SYS_HZ);
do_div(div_timer, div_clock);
return (0);
}
/*
* timer without interrupts
*/
/* converts the timer reading to U-Boot ticks */
/* the timestamp is the number of ticks since reset */
static ulong get_timer_masked (void)
{
/* get current count */
unsigned long long now = READ_TIMER;
if(now > lastdec) {
/* Must have wrapped */
total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
} else {
total_count += lastdec - now;
}
lastdec = now;
/* Reuse "now" */
now = total_count;
do_div(now, div_timer);
timestamp = now;
return timestamp;
}
ulong get_timer (ulong base_ticks)
{
return get_timer_masked () - base_ticks;
}
/* delay usec useconds */
void __udelay (unsigned long usec)
{
ulong tmo, tmp;
/* Convert to U-Boot ticks */
tmo = usec * CONFIG_SYS_HZ;
tmo /= (1000000L);
tmp = get_timer_masked(); /* get current timestamp */
tmo += tmp; /* form target timestamp */
while (get_timer_masked () < tmo) {/* loop till event */
/*NOP*/;
}
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* Return the timebase clock frequency
* i.e. how often the timer decrements
*/
ulong get_tbclk (void)
{
unsigned long long tmp = CONFIG_SYS_HZ_CLOCK;
do_div(tmp, div_clock);
return tmp;
}