stm32mp157
/
uboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
uboot/u-boot-stm32mp-2020.01/arch/powerpc/dts/gdsys/mpc8308.dtsi

355 lines
8.0 KiB
Plaintext
Raw Blame History

/*
* Basic platform for gdsys mpc8308 based devices
*
* (C) Copyright 2014
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*
* based on mpc8308rdb
* Copyright 2009 Freescale Semiconductor Inc.
* Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
#include <dt-bindings/memory/mpc83xx-sdram.h>
/ {
compatible = "fsl,mpc8308rdb";
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
};
memory {
device_type = "memory";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8308@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
board_lbc: localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
};
board_soc: immr@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8308-immr", "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
memory@2000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc83xx-mem-controller";
reg = <0x2000 0x1000>;
device_type = "memory";
driver_software_override = <DSO_ENABLE>;
p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>;
n_impedance_override = <DSO_N_IMPEDANCE_NOMINAL>;
odt_termination_value = <ODT_TERMINATION_150_OHM>;
ddr_type = <DDR_TYPE_DDR2_1_8_VOLT>;
clock_adjust = <CLOCK_ADJUST_05>;
read_to_write = <0>;
write_to_read = <0>;
read_to_read = <0>;
write_to_write = <0>;
active_powerdown_exit = <2>;
precharge_powerdown_exit = <6>;
odt_powerdown_exit = <8>;
mode_reg_set_cycle = <2>;
precharge_to_activate = <2>;
activate_to_precharge = <6>;
activate_to_readwrite = <2>;
mcas_latency = <CASLAT_40>;
refresh_recovery = <17>;
last_data_to_precharge = <2>;
activate_to_activate = <2>;
last_write_data_to_read = <2>;
additive_latency = <0>;
mcas_to_preamble_override = <READ_LAT_PLUS_1_2>;
write_latency = <3>;
read_to_precharge = <2>;
write_cmd_to_write_data = <CLOCK_DELAY_1_2>;
minimum_cke_pulse_width = <3>;
four_activates_window = <5>;
self_refresh = <SREN_ENABLE>;
sdram_type = <TYPE_DDR2>;
databus_width = <DATA_BUS_WIDTH_32>;
force_self_refresh = <MODE_NORMAL>;
dll_reset = <DLL_RESET_ENABLE>;
dqs_config = <DQS_TRUE>;
odt_config = <ODT_ASSERT_READS>;
posted_refreshes = <1>;
refresh_interval = <2084>;
precharge_interval = <256>;
sdmode = <0x0242>;
esdmode = <0x0440>;
ram@0 {
reg = <0x0 0x0 0x8000000>;
compatible = "nanya,nt5tu64m16hg";
odt_rd_cfg = <ODT_RD_NEVER>;
odt_wr_cfg = <ODT_WR_ONLY_CURRENT>;
bank_bits = <3>;
row_bits = <13>;
col_bits = <10>;
};
};
IIC:i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
IIC2: i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
status = "disabled";
};
SPI:spi@7000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
interrupts = <16 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
};
sdhc@2e000 {
compatible = "fsl,esdhc", "fsl,mpc8308-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,auto-cmd12;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
gpio0: gpio@c00 {
#gpio-cells = <2>;
device_type = "gpio";
compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x18>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: interrupt-controller@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
device_type = "ipic";
};
ipic-msi@7c0 {
compatible = "fsl,ipic-msi";
reg = <0x7c0 0x40>;
msi-available-ranges = <0x0 0x100>;
interrupts = < 0x43 0x8
0x4 0x8
0x51 0x8
0x52 0x8
0x56 0x8
0x57 0x8
0x58 0x8
0x59 0x8 >;
interrupt-parent = < &ipic >;
};
dma@2c000 {
compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
reg = <0x2c000 0x1800>;
interrupts = <3 0x8
94 0x8>;
interrupt-parent = < &ipic >;
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x24000 0x1000>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar", "fsl,tsec";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
phy-handle = < &phy1 >;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@1 {
reg = <0x1>;
};
phy2: ethernet-phy@0 {
reg = <0x0>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar", "fsl,tsec";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
phy-handle = < &phy2 >;
status = "disabled";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
};
pci0: pcie@e0009000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
reg = <0xe0009000 0x00001000
0xb0000000 0x01000000>;
ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
bus-range = <0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0 0 0 1 &ipic 1 8
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
interrupts = <0x1 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <0>;
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
reg = <0 0 0 0 0>;
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00800000>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink