668 lines
14 KiB
Plaintext
668 lines
14 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*/
|
|
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include "rk3399.dtsi"
|
|
|
|
/ {
|
|
model = "Theobroma Systems RK3399-Q7 SoM";
|
|
compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
|
|
|
|
config {
|
|
u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
|
|
u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
|
|
u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
|
|
u-boot,boot-led = "module_led";
|
|
sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
u-boot,spl-boot-order = \
|
|
"same-as-spl", &spiflash, &sdhci, &sdmmc;
|
|
};
|
|
|
|
aliases {
|
|
spi0 = &spi1;
|
|
spi1 = &spi5;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&leds_pins_puma>;
|
|
|
|
module_led {
|
|
label = "module_led";
|
|
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
sd_card_led {
|
|
label = "sd_card_led";
|
|
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
};
|
|
|
|
clkin_gmac: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "clkin_gmac";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
dw_hdmi_audio: dw-hdmi-audio {
|
|
status = "enabled";
|
|
compatible = "rockchip,dw-hdmi-audio";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
hdmi_codec: hdmi-codec {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "HDMI-CODEC";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s2>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&hdmi>;
|
|
};
|
|
};
|
|
|
|
hdmi_sound: hdmi-sound {
|
|
status = "disabled";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "rockchip,hdmi";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s2>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&hdmi>;
|
|
};
|
|
};
|
|
|
|
usbhub_enable: usbhub_enable {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usbhub_enable";
|
|
enable-active-low;
|
|
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&host_vbus_drv>;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
/*
|
|
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
|
|
* eMMC and SPI flash powered-down initially (in fact it keeps the
|
|
* reset signal asserted). Even though it is an enable signal, we
|
|
* model this as a regulator.
|
|
*/
|
|
bios_enable: bios_enable {
|
|
compatible = "regulator-fixed";
|
|
u-boot,dm-pre-reloc;
|
|
regulator-name = "bios_enable";
|
|
enable-active-high;
|
|
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vccadc_ref: vccadc-ref {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v8_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vcc3v3_sys: vcc3v3-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc5v0_otg: vcc5v0-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&otg_vbus_drv>;
|
|
regulator-name = "vcc5v0_otg";
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc_phy: vcc-phy-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_phy";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_log: vdd-log {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm2 0 25000 1>;
|
|
regulator-name = "vdd_log";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-init-microvolt = <950000>;
|
|
};
|
|
};
|
|
|
|
&emmc_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
phy-supply = <&vcc_phy>;
|
|
phy-mode = "rgmii";
|
|
clock_in_out = "input";
|
|
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <2 10000 50000>;
|
|
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
|
assigned-clock-parents = <&clkin_gmac>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
tx_delay = <0x10>;
|
|
rx_delay = <0x10>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
i2c-scl-rising-time-ns = <168>;
|
|
i2c-scl-falling-time-ns = <4>;
|
|
clock-frequency = <400000>;
|
|
|
|
vdd_gpu: vdd_gpu {
|
|
status = "okay";
|
|
compatible = "fcs,fan53555";
|
|
reg = <0x60>;
|
|
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "fan53555-reg";
|
|
regulator-name = "vdd_gpu";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1230000>;
|
|
regulator-ramp-delay = <1000>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-state = <3>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk808: pmic@1b {
|
|
compatible = "rockchip,rk808";
|
|
reg = <0x1b>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt?
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "xin32k", "rk808-clkout2";
|
|
|
|
vcc1-supply = <&vcc5v0_sys>;
|
|
vcc2-supply = <&vcc5v0_sys>;
|
|
vcc3-supply = <&vcc5v0_sys>;
|
|
vcc4-supply = <&vcc5v0_sys>;
|
|
vcc6-supply = <&vcc5v0_sys>;
|
|
vcc7-supply = <&vcc5v0_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc5v0_sys>;
|
|
vcc10-supply = <&vcc5v0_sys>;
|
|
vcc11-supply = <&vcc5v0_sys>;
|
|
vcc12-supply = <&vcc3v3_sys>;
|
|
vddio-supply = <&vcc1v8_pmu>;
|
|
|
|
regulators {
|
|
vdd_center: DCDC_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-name = "vdd_center";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_l: DCDC_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-name = "vdd_cpu_l";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_ddr";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_ldo1: LDO_REG1 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_ldo1";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc1v8_hdmi: LDO_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc1v8_hdmi";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc1v8_pmu: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc1v8_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_sd: LDO_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc_sd";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcc_ldo5: LDO_REG5 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc_ldo5";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ldo6: LDO_REG6 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-name = "vcc_ldo6";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc0v9_hdmi: LDO_REG7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vcc0v9_hdmi";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_efuse: LDO_REG8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_efuse";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s3: SWITCH_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc3v3_s3";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s0: SWITCH_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc3v3_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c8 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
vdd_cpu_b: vdd_cpu_b {
|
|
status = "okay";
|
|
compatible = "fcs,fan53555";
|
|
reg = <0x60>;
|
|
vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "fan53555-reg";
|
|
regulator-name = "vdd_cpu_b";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1230000>;
|
|
regulator-ramp-delay = <1000>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-state = <3>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
rockchip,i2s-broken-burst-len;
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <8>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
&i2s2 {
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
|
|
audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */
|
|
sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
|
|
gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */
|
|
};
|
|
|
|
&pcie0 {
|
|
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
|
|
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
|
|
assigned-clock-rates = <100000000>;
|
|
ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
num-lanes = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_clkreqn>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
pmu1830-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs400-1_8v;
|
|
supports-emmc;
|
|
non-removable;
|
|
keep-power-in-suspend;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
clock-frequency = <150000000>;
|
|
max-frequency = <40000000>;
|
|
supports-sd;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
num-slots = <1>;
|
|
vqmmc-supply = <&vcc_sd>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dwc3_typec0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dwc3_typec1 {
|
|
status = "okay";
|
|
tsd,usb-port-power = "usbhub_enable";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio1 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&gpio3 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&pinctrl {
|
|
/* Pins that are not explicitely used by any devices */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&puma_pin_hog>;
|
|
|
|
hog {
|
|
puma_pin_hog: puma_pin_hog {
|
|
rockchip,pins =
|
|
/* We need pull-ups on Q7 buttons */
|
|
<RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
|
|
<RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
|
|
<RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
|
|
<RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins =
|
|
<RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
leds_pins_puma: led_pins@0 {
|
|
rockchip,pins =
|
|
<RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
<RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usb2 {
|
|
otg_vbus_drv: otg-vbus-drv {
|
|
rockchip,pins =
|
|
<RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
host_vbus_drv: host-vbus-drv {
|
|
rockchip,pins =
|
|
<RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c8 {
|
|
i2c8_xfer_a: i2c8-xfer {
|
|
rockchip,pins =
|
|
<RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
|
|
<RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
};
|
|
&i2c2 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
};
|
|
&i2c4 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
};
|
|
&i2c6 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&i2c6_xfer {
|
|
/* Enable pull-ups, the pins would float otherwise. */
|
|
rockchip,pins =
|
|
<RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>,
|
|
<RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>;
|
|
};
|
|
|
|
&i2c7 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
rtc_twi: rtc@6f {
|
|
compatible = "isil,isl1208";
|
|
reg = <0x6f>;
|
|
};
|
|
fan: fan@18 {
|
|
compatible = "ti,amc6821";
|
|
reg = <0x18>;
|
|
cooling-min-state = <0>;
|
|
cooling-max-state = <9>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
spiflash: w25q32dw@0 {
|
|
u-boot,dm-pre-reloc;
|
|
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <49500000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
};
|
|
};
|
|
|
|
&spi5 {
|
|
status = "okay";
|
|
};
|