361 lines
7.0 KiB
Plaintext
361 lines
7.0 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2019 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
* Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
|
|
|
/ {
|
|
model = "Khadas VIM3";
|
|
|
|
aliases {
|
|
serial0 = &uart_AO;
|
|
ethernet0 = ðmac;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>;
|
|
};
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 2>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1710000>;
|
|
|
|
button-function {
|
|
label = "Function";
|
|
linux,code = <KEY_FN>;
|
|
press-threshold-microvolt = <10000>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
white {
|
|
label = "vim3:white:sys";
|
|
gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
red {
|
|
label = "vim3:red";
|
|
gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
poll-interval = <100>;
|
|
|
|
power-button {
|
|
label = "power";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
|
clocks = <&wifi32k>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
|
|
dc_in: regulator-dc_in {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "DC_IN";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_5v: regulator-vcc_5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&dc_in>;
|
|
|
|
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vcc_1v8: regulator-vcc_1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_3v3: regulator-vcc_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vsys_3v3>;
|
|
regulator-always-on;
|
|
/* FIXME: actually controlled by VDDCPU_B_EN */
|
|
};
|
|
|
|
vddao_1v8: regulator-vddao_1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDIO_AO1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vsys_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
emmc_1v8: regulator-emmc_1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "EMMC_AO1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vsys_3v3: regulator-vsys_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VSYS_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&dc_in>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
usb_pwr: regulator-usb_pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "USB_PWR";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&hdmi_tx_tmds_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
wifi32k: wifi32k {
|
|
compatible = "pwm-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
|
};
|
|
};
|
|
|
|
&cec_AO {
|
|
pinctrl-0 = <&cec_ao_a_h_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
};
|
|
|
|
&cecb_AO {
|
|
pinctrl-0 = <&cec_ao_b_h_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
};
|
|
|
|
&ext_mdio {
|
|
external_phy: ethernet-phy@0 {
|
|
/* Realtek RTL8211F (0x001cc916) */
|
|
reg = <0>;
|
|
max-speed = <1000>;
|
|
|
|
interrupt-parent = <&gpio_intc>;
|
|
/* MAC_INTR on GPIOZ_14 */
|
|
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
ðmac {
|
|
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&external_phy>;
|
|
amlogic,tx-delay-ns = <2>;
|
|
};
|
|
|
|
&hdmi_tx {
|
|
status = "okay";
|
|
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
|
pinctrl-names = "default";
|
|
hdmi-supply = <&vcc_5v>;
|
|
};
|
|
|
|
&hdmi_tx_tmds_port {
|
|
hdmi_tx_tmds_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
|
|
&i2c_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
gpio_expander: gpio-controller@20 {
|
|
compatible = "ti,tca6408";
|
|
reg = <0x20>;
|
|
vcc-supply = <&vcc_3v3>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&ir {
|
|
status = "okay";
|
|
pinctrl-0 = <&remote_input_ao_pins>;
|
|
pinctrl-names = "default";
|
|
linux,rc-map-name = "rc-khadas";
|
|
};
|
|
|
|
&pwm_ef {
|
|
status = "okay";
|
|
pinctrl-0 = <&pwm_e_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vddao_1v8>;
|
|
};
|
|
|
|
/* SDIO */
|
|
&sd_emmc_a {
|
|
status = "okay";
|
|
pinctrl-0 = <&sdio_pins>;
|
|
pinctrl-1 = <&sdio_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr50;
|
|
max-frequency = <100000000>;
|
|
|
|
non-removable;
|
|
disable-wp;
|
|
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
|
vmmc-supply = <&vsys_3v3>;
|
|
vqmmc-supply = <&vddao_1v8>;
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
};
|
|
};
|
|
|
|
/* SD card */
|
|
&sd_emmc_b {
|
|
status = "okay";
|
|
pinctrl-0 = <&sdcard_c_pins>;
|
|
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
max-frequency = <50000000>;
|
|
disable-wp;
|
|
|
|
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <&vsys_3v3>;
|
|
vqmmc-supply = <&vsys_3v3>;
|
|
};
|
|
|
|
/* eMMC */
|
|
&sd_emmc_c {
|
|
status = "okay";
|
|
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
max-frequency = <200000000>;
|
|
disable-wp;
|
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&emmc_1v8>;
|
|
};
|
|
|
|
&uart_A {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
|
max-speed = <2000000>;
|
|
clocks = <&wifi32k>;
|
|
clock-names = "lpo";
|
|
};
|
|
};
|
|
|
|
&uart_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&usb2_phy0 {
|
|
phy-supply = <&dc_in>;
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
phy-supply = <&usb_pwr>;
|
|
};
|
|
|
|
&usb3_pcie_phy {
|
|
phy-supply = <&usb_pwr>;
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
dr_mode = "peripheral";
|
|
};
|