uboot/u-boot-stm32mp-2020.01/arch/arm/dts/fsl-ls1088a-qds.dts

134 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP ls1088a QDS board device tree source
*
* Copyright 2017 NXP
*/
/dts-v1/;
#include "fsl-ls1088a.dtsi"
/ {
model = "NXP Layerscape 1088a QDS Board";
compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
aliases {
spi0 = &qspi;
spi1 = &dspi;
};
};
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
rtc@51 {
compatible = "pcf2127-rtc";
reg = <0x51>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0 0 0x5 0x80000000 0x08000000
2 0 0x5 0x30000000 0x00010000
3 0 0x5 0x20000000 0x00010000>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1 0x0 0x10000>;
};
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus", "fsl,ls1088aqds-fpga",
"fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
bank-width = <1>;
device-width = <1>;
ranges = <0 2 0 0x100>;
};
};
&dspi {
bus-num = <0>;
status = "okay";
dflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
};
dflash1: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <3500000>;
reg = <1>;
};
dflash2: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <3500000>;
reg = <2>;
};
};
&qspi {
bus-num = <0>;
status = "okay";
qflash0: s25fs512s@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
};
qflash1: s25fs512s@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <1>;
};
};
&sata {
status = "okay";
};