554 lines
11 KiB
Plaintext
554 lines
11 KiB
Plaintext
/*
|
|
* SAMSUNG Snow board device tree source
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "exynos5250.dtsi"
|
|
|
|
/ {
|
|
model = "Google Snow";
|
|
compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
|
|
|
|
aliases {
|
|
i2c0 = "/i2c@12C60000";
|
|
i2c1 = "/i2c@12C70000";
|
|
i2c2 = "/i2c@12C80000";
|
|
i2c3 = "/i2c@12C90000";
|
|
i2c4 = "/i2c@12CA0000";
|
|
i2c104 = &i2c_104;
|
|
i2c5 = "/i2c@12CB0000";
|
|
i2c6 = "/i2c@12CC0000";
|
|
i2c7 = "/i2c@12CD0000";
|
|
spi0 = "/spi@12d20000";
|
|
spi1 = "/spi@12d30000";
|
|
spi2 = "/spi@12d40000";
|
|
spi3 = "/spi@131a0000";
|
|
spi4 = "/spi@131b0000";
|
|
mmc0 = "/mmc@12200000";
|
|
mmc1 = "/mmc@12210000";
|
|
mmc2 = "/mmc@12220000";
|
|
mmc3 = "/mmc@12230000";
|
|
serial0 = "/serial@12C30000";
|
|
console = "/serial@12C30000";
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x80000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=tty1";
|
|
stdout-path = "serial3:115200n8";
|
|
};
|
|
|
|
iram {
|
|
reg = <0x02020000 0x60000>;
|
|
};
|
|
|
|
config {
|
|
samsung,bl1-offset = <0x1400>;
|
|
samsung,bl2-offset = <0x3400>;
|
|
u-boot-memory = "/memory";
|
|
u-boot-offset = <0x3e00000 0x100000>;
|
|
};
|
|
|
|
flash {
|
|
reg = <0 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
pre-boot {
|
|
label = "bl1 pre-boot";
|
|
reg = <0 0x2000>;
|
|
read-only;
|
|
filename = "e5250.nbl1.bin";
|
|
type = "blob exynos-bl1";
|
|
required;
|
|
};
|
|
|
|
spl {
|
|
label = "bl2 spl";
|
|
reg = <0x2000 0x4000>;
|
|
read-only;
|
|
filename = "bl2.bin";
|
|
type = "blob exynos-bl2 boot,dtb";
|
|
payload = "/flash/ro-boot";
|
|
required;
|
|
};
|
|
|
|
ro-boot {
|
|
label = "u-boot";
|
|
reg = <0x6000 0xb0000>;
|
|
read-only;
|
|
type = "blob boot,dtb";
|
|
required;
|
|
};
|
|
};
|
|
|
|
i2c-arbitrator {
|
|
compatible = "i2c-arb-gpio-challenge";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c-parent = <&{/i2c@12CA0000}>;
|
|
|
|
our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
|
|
their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
|
|
slew-delay-us = <10>;
|
|
wait-retry-us = <3000>;
|
|
wait-free-us = <50000>;
|
|
|
|
/* Use ID 104 as a hint that we're on physical bus 4 */
|
|
i2c_104: i2c@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
battery: sbs-battery@b {
|
|
compatible = "sbs,sbs-battery";
|
|
reg = <0xb>;
|
|
sbs,poll-retry-count = <1>;
|
|
};
|
|
|
|
cros_ec: embedded-controller {
|
|
compatible = "google,cros-ec-i2c";
|
|
reg = <0x1e>;
|
|
interrupts = <6 IRQ_TYPE_NONE>;
|
|
interrupt-parent = <&gpx1>;
|
|
wakeup-source;
|
|
i2c-max-frequency = <100000>;
|
|
u-boot,i2c-offset-len = <0>;
|
|
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
power-regulator {
|
|
compatible = "ti,tps65090";
|
|
reg = <0x48>;
|
|
|
|
regulators {
|
|
dcdc1 {
|
|
ti,enable-ext-control;
|
|
};
|
|
dcdc2 {
|
|
ti,enable-ext-control;
|
|
};
|
|
dcdc3 {
|
|
ti,enable-ext-control;
|
|
};
|
|
fet1: fet1 {
|
|
regulator-name = "vcd_led";
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
tps65090_fet2: fet2 {
|
|
regulator-name = "video_mid";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet3 {
|
|
regulator-name = "wwan_r";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet4 {
|
|
regulator-name = "sdcard";
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet5 {
|
|
regulator-name = "camout";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
fet6: fet6 {
|
|
regulator-name = "lcd_vdd";
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
tps65090_fet7: fet7 {
|
|
regulator-name = "video_mid_1a";
|
|
regulator-always-on;
|
|
ti,overcurrent-wait = <3>;
|
|
};
|
|
ldo1 {
|
|
};
|
|
ldo2 {
|
|
};
|
|
};
|
|
|
|
charger {
|
|
compatible = "ti,tps65090-charger";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@12CD0000 {
|
|
ptn3460: lvds-bridge@20 {
|
|
compatible = "nxp,ptn3460";
|
|
reg = <0x20>;
|
|
sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
|
|
reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
|
|
hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
|
|
edid-emulation = <5>;
|
|
|
|
ports {
|
|
port@0 {
|
|
bridge_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
bridge_in: endpoint {
|
|
remote-endpoint = <&dp_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
max98095: codec@11 {
|
|
compatible = "maxim,max98095";
|
|
reg = <0x11>;
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
};
|
|
|
|
i2c@12C90000 {
|
|
clock-frequency = <100000>;
|
|
tpm@20 {
|
|
reg = <0x20>;
|
|
u-boot,i2c-offset-len = <0>;
|
|
compatible = "infineon,slb9635tt";
|
|
};
|
|
};
|
|
|
|
spi@12d30000 {
|
|
spi-max-frequency = <50000000>;
|
|
firmware_storage_spi: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 1000000 0>;
|
|
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
|
|
default-brightness-level = <7>;
|
|
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <&fet1>;
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "auo,b116xw03";
|
|
power-supply = <&fet6>;
|
|
backlight = <&backlight>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
spi@131b0000 {
|
|
spi-max-frequency = <1000000>;
|
|
spi-deactivate-delay = <100>;
|
|
|
|
/* Snow did support SPI but the released version used I2C */
|
|
embedded-controller {
|
|
compatible = "google,cros-ec-i2c";
|
|
reg = <0x1e>;
|
|
spi-max-frequency = <5000000>;
|
|
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
|
|
optimise-flash-write;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "google,snow-audio-max98095";
|
|
|
|
samsung,model = "Snow-I2S-MAX98095";
|
|
samsung,audio-codec = <&max98095>;
|
|
codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
cpu {
|
|
sound-dai = <&i2s0 0>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&max98095 0>;
|
|
};
|
|
};
|
|
|
|
sound@12d60000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12C60000 {
|
|
max77686@09 {
|
|
reg = <0x9>;
|
|
compatible = "maxim,max77686";
|
|
};
|
|
};
|
|
|
|
mmc@12200000 {
|
|
samsung,bus-width = <8>;
|
|
samsung,timing = <1 3 3>;
|
|
samsung,removable = <0>;
|
|
};
|
|
|
|
mmc@12210000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc@12220000 {
|
|
samsung,bus-width = <4>;
|
|
samsung,timing = <1 2 3>;
|
|
samsung,removable = <1>;
|
|
};
|
|
|
|
mmc@12230000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci@12110000 {
|
|
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
xhci@12000000 {
|
|
samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
tmu@10060000 {
|
|
samsung,min-temp = <25>;
|
|
samsung,max-temp = <125>;
|
|
samsung,start-warning = <95>;
|
|
samsung,start-tripping = <105>;
|
|
samsung,hw-tripping = <110>;
|
|
samsung,efuse-min-value = <40>;
|
|
samsung,efuse-value = <55>;
|
|
samsung,efuse-max-value = <100>;
|
|
samsung,slope = <274761730>;
|
|
samsung,dc-value = <25>;
|
|
};
|
|
|
|
fimd@14400000 {
|
|
samsung,vl-freq = <60>;
|
|
samsung,vl-col = <1366>;
|
|
samsung,vl-row = <768>;
|
|
samsung,vl-width = <1366>;
|
|
samsung,vl-height = <768>;
|
|
|
|
samsung,vl-clkp;
|
|
samsung,vl-dp;
|
|
samsung,vl-hsp;
|
|
samsung,vl-vsp;
|
|
|
|
samsung,vl-bpix = <4>;
|
|
|
|
samsung,vl-hspw = <32>;
|
|
samsung,vl-hbpd = <80>;
|
|
samsung,vl-hfpd = <48>;
|
|
samsung,vl-vspw = <5>;
|
|
samsung,vl-vbpd = <14>;
|
|
samsung,vl-vfpd = <3>;
|
|
samsung,vl-cmd-allow-len = <0xf>;
|
|
|
|
samsung,winid = <0>;
|
|
samsung,interface-mode = <1>;
|
|
samsung,dp-enabled = <1>;
|
|
samsung,dual-lcd-enabled = <0>;
|
|
};
|
|
|
|
dp@145b0000 {
|
|
samsung,lt-status = <0>;
|
|
|
|
samsung,master-mode = <0>;
|
|
samsung,bist-mode = <0>;
|
|
samsung,bist-pattern = <0>;
|
|
samsung,h-sync-polarity = <0>;
|
|
samsung,v-sync-polarity = <0>;
|
|
samsung,interlaced = <0>;
|
|
samsung,color-space = <0>;
|
|
samsung,dynamic-range = <0>;
|
|
samsung,ycbcr-coeff = <0>;
|
|
samsung,color-depth = <1>;
|
|
samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
ports {
|
|
port@0 {
|
|
dp_out: endpoint {
|
|
remote-endpoint = <&bridge_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&i2c_0 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <378000>;
|
|
|
|
max77686: max77686@09 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 IRQ_TYPE_NONE>;
|
|
wakeup-source;
|
|
reg = <0x09>;
|
|
#clock-cells = <1>;
|
|
|
|
voltage-regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "P1.0V_LDO_OUT1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "P1.8V_LDO_OUT2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "P1.8V_LDO_OUT3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "P1.1V_LDO_OUT7";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "P1.0V_LDO_OUT8";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "P1.8V_LDO_OUT10";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "P3.0V_LDO_OUT12";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "P1.8V_LDO_OUT14";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "P1.0V_LDO_OUT15";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "P1.8V_LDO_OUT16";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "vdd_mydp";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "P1.8V_BUCK_OUT5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "P1.35V_BUCK_OUT6";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "P2.0V_BUCK_OUT7";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "P2.85V_BUCK_OUT8";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "cros-ec-keyboard.dtsi"
|