uboot/u-boot-stm32mp-2020.01/arch/arm/dts/exynos4210-pinctrl.dtsi

/*
 * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
 *
 * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 * Copyright (c) 2011-2012 Linaro Ltd.
 *		www.linaro.org
 *
 * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
 * tree nodes are listed in this file.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

/ {
	pinctrl@11400000 {
		gpa0: gpa0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpa1: gpa1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpb: gpb {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpc0: gpc0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpc1: gpc1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpd0: gpd0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpd1: gpd1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpe0: gpe0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpe1: gpe1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpe2: gpe2 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpe3: gpe3 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpe4: gpe4 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpf0: gpf0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpf1: gpf1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpf2: gpf2 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpf3: gpf3 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

	};

	pinctrl@11000000 {
		gpj0: gpj0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpj1: gpj1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpk0: gpk0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpk1: gpk1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpk2: gpk2 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpk3: gpk3 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpl0: gpl0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpl1: gpl1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpl2: gpl2 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpy0: gpy0 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpy1: gpy1 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpy2: gpy2 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpy3: gpy3 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpy4: gpy4 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpy5: gpy5 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpy6: gpy6 {
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpx0: gpx0 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			interrupt-parent = <&gic>;
			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
			#interrupt-cells = <2>;
		};

		gpx1: gpx1 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			interrupt-parent = <&gic>;
			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
			#interrupt-cells = <2>;
		};

		gpx2: gpx2 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpx3: gpx3 {
			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

	};

	pinctrl@03860000 {
		gpz: gpz {
			gpio-controller;
			#gpio-cells = <2>;
		};

	};
};