170 lines
3.8 KiB
Plaintext
170 lines
3.8 KiB
Plaintext
/*
|
|
* Common support for Siemens Draco SOM (AM335x based)
|
|
*
|
|
* Copyright (C) 2013,2014 - Stefan Roese <sr@denx.de>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
tick-timer = &timer2;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x08000000>; /* 128 MB */
|
|
};
|
|
|
|
ocp {
|
|
uart0: serial@44e09000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
i2c0: i2c@44e0b000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
eeprom: eeprom@50 {
|
|
compatible = "atmel,24c128";
|
|
reg = <0x50>;
|
|
pagesize = <64>;
|
|
};
|
|
};
|
|
|
|
musb: usb@47400000 {
|
|
status = "okay";
|
|
|
|
control@44e10620 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@47401300 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@47401b00 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb@47401000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb@47401800 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
dma-controller@47402000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&am33xx_pinmux {
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
|
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
|
>;
|
|
};
|
|
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
|
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
|
>;
|
|
};
|
|
|
|
nandflash_pins: nandflash_pins {
|
|
pinctrl-single,pins = <
|
|
0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
|
0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
|
0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
|
0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
|
0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
|
0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
|
0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
|
0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
|
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
|
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
|
|
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
|
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
|
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
|
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
|
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
|
|
>;
|
|
};
|
|
};
|
|
|
|
|
|
&timer3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nandflash_pins>;
|
|
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
|
|
|
nand@0,0 {
|
|
reg = <0 0 0>; /* CS0, offset 0 */
|
|
nand-bus-width = <8>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
gpmc,device-nand = "true";
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-on-ns = <0>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wait-on-read = "true";
|
|
gpmc,wait-on-write = "true";
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
elm_id = <&elm>;
|
|
};
|
|
};
|
|
|
|
/* disable the RTC node as its not accessible on the draco/dxr2 board */
|
|
&rtc {
|
|
status = "disabled";
|
|
ti,hwmods = "disabled";
|
|
};
|