uboot/u-boot-stm32mp-2020.01/arch/arm/include/asm/arch-meson/gx.h

61 lines
1.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
*/
#ifndef __GX_H__
#define __GX_H__
#define GX_FIRMWARE_MEM_SIZE 0x1000000
#define GX_AOBUS_BASE 0xc8100000
#define GX_PERIPHS_BASE 0xc8834400
#define GX_HIU_BASE 0xc883c000
#define GX_ETH_BASE 0xc9410000
/* Always-On Peripherals registers */
#define GX_AO_ADDR(off) (GX_AOBUS_BASE + ((off) << 2))
#define GX_AO_SEC_GP_CFG0 GX_AO_ADDR(0x90)
#define GX_AO_SEC_GP_CFG3 GX_AO_ADDR(0x93)
#define GX_AO_SEC_GP_CFG4 GX_AO_ADDR(0x94)
#define GX_AO_SEC_GP_CFG5 GX_AO_ADDR(0x95)
#define GX_AO_BOOT_DEVICE 0xF
#define GX_AO_MEM_SIZE_MASK 0xFFFF0000
#define GX_AO_MEM_SIZE_SHIFT 16
#define GX_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000
#define GX_AO_BL31_RSVMEM_SIZE_SHIFT 16
#define GX_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
/* Peripherals registers */
#define GX_PERIPHS_ADDR(off) (GX_PERIPHS_BASE + ((off) << 2))
/* GPIO registers 0 to 6 */
#define _GX_GPIO_OFF(n) ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
#define GX_GPIO_EN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 0)
#define GX_GPIO_IN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
#define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
#define GX_ETH_REG_0 GX_PERIPHS_ADDR(0x50)
#define GX_ETH_REG_1 GX_PERIPHS_ADDR(0x51)
#define GX_ETH_REG_2 GX_PERIPHS_ADDR(0x56)
#define GX_ETH_REG_3 GX_PERIPHS_ADDR(0x57)
#define GX_ETH_REG_0_PHY_INTF BIT(0)
#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
#define GX_ETH_REG_0_PHY_CLK_EN BIT(10)
#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11)
#define GX_ETH_REG_0_CLK_EN BIT(12)
/* HIU registers */
#define GX_HIU_ADDR(off) (GX_HIU_BASE + ((off) << 2))
#define GX_MEM_PD_REG_0 GX_HIU_ADDR(0x40)
/* Ethernet memory power domain */
#define GX_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
#endif /* __GX_H__ */