978 lines
24 KiB
Plaintext
978 lines
24 KiB
Plaintext
/*
|
|
* Copyright (C) 2016 ARM Ltd.
|
|
* based on the Allwinner H3 dtsi:
|
|
* Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/sun50i-a64-ccu.h>
|
|
#include <dt-bindings/clock/sun8i-de2.h>
|
|
#include <dt-bindings/clock/sun8i-r-ccu.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/reset/sun50i-a64-ccu.h>
|
|
#include <dt-bindings/reset/sun8i-de2.h>
|
|
#include <dt-bindings/reset/sun8i-r-ccu.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
chosen {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
simplefb_lcd: framebuffer-lcd {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "mixer0-lcd0";
|
|
clocks = <&ccu CLK_TCON0>,
|
|
<&display_clocks CLK_MIXER0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
simplefb_hdmi: framebuffer-hdmi {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "mixer1-lcd1-hdmi";
|
|
clocks = <&display_clocks CLK_MIXER1>,
|
|
<&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
de: display-engine {
|
|
compatible = "allwinner,sun50i-a64-display-engine";
|
|
allwinner,pipelines = <&mixer0>,
|
|
<&mixer1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
osc24M: osc24M_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: osc32k_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
iosc: internal-osc-clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <16000000>;
|
|
clock-accuracy = <300000000>;
|
|
clock-output-names = "iosc";
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
sound_spdif {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "On-board SPDIF";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&spdif>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&spdif_out>;
|
|
};
|
|
};
|
|
|
|
spdif_out: spdif-out {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "linux,spdif-dit";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
de2@1000000 {
|
|
compatible = "allwinner,sun50i-a64-de2";
|
|
reg = <0x1000000 0x400000>;
|
|
allwinner,sram = <&de2_sram 1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x1000000 0x400000>;
|
|
|
|
display_clocks: clock@0 {
|
|
compatible = "allwinner,sun50i-a64-de2-clk";
|
|
reg = <0x0 0x100000>;
|
|
clocks = <&ccu CLK_DE>,
|
|
<&ccu CLK_BUS_DE>;
|
|
clock-names = "mod",
|
|
"bus";
|
|
resets = <&ccu RST_BUS_DE>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
mixer0: mixer@100000 {
|
|
compatible = "allwinner,sun50i-a64-de2-mixer-0";
|
|
reg = <0x100000 0x100000>;
|
|
clocks = <&display_clocks CLK_BUS_MIXER0>,
|
|
<&display_clocks CLK_MIXER0>;
|
|
clock-names = "bus",
|
|
"mod";
|
|
resets = <&display_clocks RST_MIXER0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mixer0_out: port@1 {
|
|
reg = <1>;
|
|
|
|
mixer0_out_tcon0: endpoint {
|
|
remote-endpoint = <&tcon0_in_mixer0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mixer1: mixer@200000 {
|
|
compatible = "allwinner,sun50i-a64-de2-mixer-1";
|
|
reg = <0x200000 0x100000>;
|
|
clocks = <&display_clocks CLK_BUS_MIXER1>,
|
|
<&display_clocks CLK_MIXER1>;
|
|
clock-names = "bus",
|
|
"mod";
|
|
resets = <&display_clocks RST_MIXER1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mixer1_out: port@1 {
|
|
reg = <1>;
|
|
|
|
mixer1_out_tcon1: endpoint {
|
|
remote-endpoint = <&tcon1_in_mixer1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
syscon: syscon@1c00000 {
|
|
compatible = "allwinner,sun50i-a64-system-control",
|
|
"syscon";
|
|
reg = <0x01c00000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
sram_c: sram@18000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00018000 0x28000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x00018000 0x28000>;
|
|
|
|
de2_sram: sram-section@0 {
|
|
compatible = "allwinner,sun50i-a64-sram-c";
|
|
reg = <0x0000 0x28000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dma: dma-controller@1c02000 {
|
|
compatible = "allwinner,sun50i-a64-dma";
|
|
reg = <0x01c02000 0x1000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_DMA>;
|
|
dma-channels = <8>;
|
|
dma-requests = <27>;
|
|
resets = <&ccu RST_BUS_DMA>;
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
tcon0: lcd-controller@1c0c000 {
|
|
compatible = "allwinner,sun50i-a64-tcon-lcd",
|
|
"allwinner,sun8i-a83t-tcon-lcd";
|
|
reg = <0x01c0c000 0x1000>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
|
|
clock-names = "ahb", "tcon-ch0";
|
|
clock-output-names = "tcon-pixel-clock";
|
|
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
|
|
reset-names = "lcd", "lvds";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tcon0_in: port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
tcon0_in_mixer0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&mixer0_out_tcon0>;
|
|
};
|
|
};
|
|
|
|
tcon0_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tcon1: lcd-controller@1c0d000 {
|
|
compatible = "allwinner,sun50i-a64-tcon-tv",
|
|
"allwinner,sun8i-a83t-tcon-tv";
|
|
reg = <0x01c0d000 0x1000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
|
|
clock-names = "ahb", "tcon-ch1";
|
|
resets = <&ccu RST_BUS_TCON1>;
|
|
reset-names = "lcd";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tcon1_in: port@0 {
|
|
reg = <0>;
|
|
|
|
tcon1_in_mixer1: endpoint {
|
|
remote-endpoint = <&mixer1_out_tcon1>;
|
|
};
|
|
};
|
|
|
|
tcon1_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
tcon1_out_hdmi: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&hdmi_in_tcon1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mmc0: mmc@1c0f000 {
|
|
compatible = "allwinner,sun50i-a64-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC0>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc1: mmc@1c10000 {
|
|
compatible = "allwinner,sun50i-a64-mmc";
|
|
reg = <0x01c10000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC1>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc2: mmc@1c11000 {
|
|
compatible = "allwinner,sun50i-a64-emmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC2>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
max-frequency = <200000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
sid: eeprom@1c14000 {
|
|
compatible = "allwinner,sun50i-a64-sid";
|
|
reg = <0x1c14000 0x400>;
|
|
};
|
|
|
|
usb_otg: usb@1c19000 {
|
|
compatible = "allwinner,sun8i-a33-musb";
|
|
reg = <0x01c19000 0x0400>;
|
|
clocks = <&ccu CLK_BUS_OTG>;
|
|
resets = <&ccu RST_BUS_OTG>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "mc";
|
|
phys = <&usbphy 0>;
|
|
phy-names = "usb";
|
|
extcon = <&usbphy 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy: phy@1c19400 {
|
|
compatible = "allwinner,sun50i-a64-usb-phy";
|
|
reg = <0x01c19400 0x14>,
|
|
<0x01c1a800 0x4>,
|
|
<0x01c1b800 0x4>;
|
|
reg-names = "phy_ctrl",
|
|
"pmu0",
|
|
"pmu1";
|
|
clocks = <&ccu CLK_USB_PHY0>,
|
|
<&ccu CLK_USB_PHY1>;
|
|
clock-names = "usb0_phy",
|
|
"usb1_phy";
|
|
resets = <&ccu RST_USB_PHY0>,
|
|
<&ccu RST_USB_PHY1>;
|
|
reset-names = "usb0_reset",
|
|
"usb1_reset";
|
|
status = "disabled";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
ehci0: usb@1c1a000 {
|
|
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
|
|
reg = <0x01c1a000 0x100>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI0>,
|
|
<&ccu CLK_BUS_EHCI0>,
|
|
<&ccu CLK_USB_OHCI0>;
|
|
resets = <&ccu RST_BUS_OHCI0>,
|
|
<&ccu RST_BUS_EHCI0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@1c1a400 {
|
|
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
|
|
reg = <0x01c1a400 0x100>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI0>,
|
|
<&ccu CLK_USB_OHCI0>;
|
|
resets = <&ccu RST_BUS_OHCI0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci1: usb@1c1b000 {
|
|
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
|
|
reg = <0x01c1b000 0x100>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI1>,
|
|
<&ccu CLK_BUS_EHCI1>,
|
|
<&ccu CLK_USB_OHCI1>;
|
|
resets = <&ccu RST_BUS_OHCI1>,
|
|
<&ccu RST_BUS_EHCI1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci1: usb@1c1b400 {
|
|
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
|
|
reg = <0x01c1b400 0x100>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI1>,
|
|
<&ccu CLK_USB_OHCI1>;
|
|
resets = <&ccu RST_BUS_OHCI1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ccu: clock@1c20000 {
|
|
compatible = "allwinner,sun50i-a64-ccu";
|
|
reg = <0x01c20000 0x400>;
|
|
clocks = <&osc24M>, <&osc32k>;
|
|
clock-names = "hosc", "losc";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@1c20800 {
|
|
compatible = "allwinner,sun50i-a64-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu 58>;
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
i2c0_pins: i2c0_pins {
|
|
pins = "PH0", "PH1";
|
|
function = "i2c0";
|
|
};
|
|
|
|
i2c1_pins: i2c1_pins {
|
|
pins = "PH2", "PH3";
|
|
function = "i2c1";
|
|
};
|
|
|
|
mmc0_pins: mmc0-pins {
|
|
pins = "PF0", "PF1", "PF2", "PF3",
|
|
"PF4", "PF5";
|
|
function = "mmc0";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc1_pins: mmc1-pins {
|
|
pins = "PG0", "PG1", "PG2", "PG3",
|
|
"PG4", "PG5";
|
|
function = "mmc1";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc2_pins: mmc2-pins {
|
|
pins = "PC5", "PC6", "PC8", "PC9",
|
|
"PC10","PC11", "PC12", "PC13",
|
|
"PC14", "PC15", "PC16";
|
|
function = "mmc2";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc2_ds_pin: mmc2-ds-pin {
|
|
pins = "PC1";
|
|
function = "mmc2";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pwm_pin: pwm_pin {
|
|
pins = "PD22";
|
|
function = "pwm";
|
|
};
|
|
|
|
rmii_pins: rmii_pins {
|
|
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
|
|
"PD18", "PD19", "PD20", "PD22", "PD23";
|
|
function = "emac";
|
|
drive-strength = <40>;
|
|
};
|
|
|
|
rgmii_pins: rgmii_pins {
|
|
pins = "PD8", "PD9", "PD10", "PD11", "PD12",
|
|
"PD13", "PD15", "PD16", "PD17", "PD18",
|
|
"PD19", "PD20", "PD21", "PD22", "PD23";
|
|
function = "emac";
|
|
drive-strength = <40>;
|
|
};
|
|
|
|
spdif_tx_pin: spdif {
|
|
pins = "PH8";
|
|
function = "spdif";
|
|
};
|
|
|
|
spi0_pins: spi0 {
|
|
pins = "PC0", "PC1", "PC2", "PC3";
|
|
function = "spi0";
|
|
};
|
|
|
|
spi1_pins: spi1 {
|
|
pins = "PD0", "PD1", "PD2", "PD3";
|
|
function = "spi1";
|
|
};
|
|
|
|
uart0_pb_pins: uart0-pb-pins {
|
|
pins = "PB8", "PB9";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pins: uart1_pins {
|
|
pins = "PG6", "PG7";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart1_rts_cts_pins: uart1_rts_cts_pins {
|
|
pins = "PG8", "PG9";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart2_pins: uart2-pins {
|
|
pins = "PB0", "PB1";
|
|
function = "uart2";
|
|
};
|
|
|
|
uart3_pins: uart3-pins {
|
|
pins = "PD0", "PD1";
|
|
function = "uart3";
|
|
};
|
|
|
|
uart4_pins: uart4-pins {
|
|
pins = "PD2", "PD3";
|
|
function = "uart4";
|
|
};
|
|
|
|
uart4_rts_cts_pins: uart4-rts-cts-pins {
|
|
pins = "PD4", "PD5";
|
|
function = "uart4";
|
|
};
|
|
};
|
|
|
|
spdif: spdif@1c21000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun50i-a64-spdif",
|
|
"allwinner,sun8i-h3-spdif";
|
|
reg = <0x01c21000 0x400>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
|
|
resets = <&ccu RST_BUS_SPDIF>;
|
|
clock-names = "apb", "spdif";
|
|
dmas = <&dma 2>;
|
|
dma-names = "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spdif_tx_pin>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s0: i2s@1c22000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun50i-a64-i2s",
|
|
"allwinner,sun8i-h3-i2s";
|
|
reg = <0x01c22000 0x400>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
|
|
clock-names = "apb", "mod";
|
|
resets = <&ccu RST_BUS_I2S0>;
|
|
dma-names = "rx", "tx";
|
|
dmas = <&dma 3>, <&dma 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: i2s@1c22400 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun50i-a64-i2s",
|
|
"allwinner,sun8i-h3-i2s";
|
|
reg = <0x01c22400 0x400>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
|
|
clock-names = "apb", "mod";
|
|
resets = <&ccu RST_BUS_I2S1>;
|
|
dma-names = "rx", "tx";
|
|
dmas = <&dma 4>, <&dma 4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@1c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART0>;
|
|
resets = <&ccu RST_BUS_UART0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@1c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART1>;
|
|
resets = <&ccu RST_BUS_UART1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@1c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART2>;
|
|
resets = <&ccu RST_BUS_UART2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@1c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART3>;
|
|
resets = <&ccu RST_BUS_UART3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@1c29000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29000 0x400>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART4>;
|
|
resets = <&ccu RST_BUS_UART4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@1c2ac00 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C0>;
|
|
resets = <&ccu RST_BUS_I2C0>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@1c2b000 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C1>;
|
|
resets = <&ccu RST_BUS_I2C1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@1c2b400 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C2>;
|
|
resets = <&ccu RST_BUS_I2C2>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
|
|
spi0: spi@1c68000 {
|
|
compatible = "allwinner,sun8i-h3-spi";
|
|
reg = <0x01c68000 0x1000>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 23>, <&dma 23>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
resets = <&ccu RST_BUS_SPI0>;
|
|
status = "disabled";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@1c69000 {
|
|
compatible = "allwinner,sun8i-h3-spi";
|
|
reg = <0x01c69000 0x1000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 24>, <&dma 24>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins>;
|
|
resets = <&ccu RST_BUS_SPI1>;
|
|
status = "disabled";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
emac: ethernet@1c30000 {
|
|
compatible = "allwinner,sun50i-a64-emac";
|
|
syscon = <&syscon>;
|
|
reg = <0x01c30000 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
resets = <&ccu RST_BUS_EMAC>;
|
|
reset-names = "stmmaceth";
|
|
clocks = <&ccu CLK_BUS_EMAC>;
|
|
clock-names = "stmmaceth";
|
|
status = "disabled";
|
|
|
|
mdio: mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@1c81000 {
|
|
compatible = "arm,gic-400";
|
|
reg = <0x01c81000 0x1000>,
|
|
<0x01c82000 0x2000>,
|
|
<0x01c84000 0x2000>,
|
|
<0x01c86000 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
};
|
|
|
|
pwm: pwm@1c21400 {
|
|
compatible = "allwinner,sun50i-a64-pwm",
|
|
"allwinner,sun5i-a13-pwm";
|
|
reg = <0x01c21400 0x400>;
|
|
clocks = <&osc24M>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pin>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi: hdmi@1ee0000 {
|
|
compatible = "allwinner,sun50i-a64-dw-hdmi",
|
|
"allwinner,sun8i-a83t-dw-hdmi";
|
|
reg = <0x01ee0000 0x10000>;
|
|
reg-io-width = <1>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
|
|
<&ccu CLK_HDMI>;
|
|
clock-names = "iahb", "isfr", "tmds";
|
|
resets = <&ccu RST_BUS_HDMI1>;
|
|
reset-names = "ctrl";
|
|
phys = <&hdmi_phy>;
|
|
phy-names = "hdmi-phy";
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hdmi_in: port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi_in_tcon1: endpoint {
|
|
remote-endpoint = <&tcon1_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
hdmi_out: port@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi_phy: hdmi-phy@1ef0000 {
|
|
compatible = "allwinner,sun50i-a64-hdmi-phy";
|
|
reg = <0x01ef0000 0x10000>;
|
|
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
|
|
<&ccu 7>;
|
|
clock-names = "bus", "mod", "pll-0";
|
|
resets = <&ccu RST_BUS_HDMI0>;
|
|
reset-names = "phy";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
rtc: rtc@1f00000 {
|
|
compatible = "allwinner,sun6i-a31-rtc";
|
|
reg = <0x01f00000 0x54>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
|
|
clocks = <&osc32k>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
r_intc: interrupt-controller@1f00c00 {
|
|
compatible = "allwinner,sun50i-a64-r-intc",
|
|
"allwinner,sun6i-a31-r-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x01f00c00 0x400>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
r_ccu: clock@1f01400 {
|
|
compatible = "allwinner,sun50i-a64-r-ccu";
|
|
reg = <0x01f01400 0x100>;
|
|
clocks = <&osc24M>, <&osc32k>, <&iosc>,
|
|
<&ccu 11>;
|
|
clock-names = "hosc", "losc", "iosc", "pll-periph";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
r_i2c: i2c@1f02400 {
|
|
compatible = "allwinner,sun50i-a64-i2c",
|
|
"allwinner,sun6i-a31-i2c";
|
|
reg = <0x01f02400 0x400>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu CLK_APB0_I2C>;
|
|
resets = <&r_ccu RST_APB0_I2C>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
r_pwm: pwm@1f03800 {
|
|
compatible = "allwinner,sun50i-a64-pwm",
|
|
"allwinner,sun5i-a13-pwm";
|
|
reg = <0x01f03800 0x400>;
|
|
clocks = <&osc24M>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_pwm_pin>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
r_pio: pinctrl@1f02c00 {
|
|
compatible = "allwinner,sun50i-a64-r-pinctrl";
|
|
reg = <0x01f02c00 0x400>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
r_i2c_pl89_pins: r-i2c-pl89-pins {
|
|
pins = "PL8", "PL9";
|
|
function = "s_i2c";
|
|
};
|
|
|
|
r_pwm_pin: pwm {
|
|
pins = "PL10";
|
|
function = "s_pwm";
|
|
};
|
|
|
|
r_rsb_pins: rsb {
|
|
pins = "PL0", "PL1";
|
|
function = "s_rsb";
|
|
};
|
|
};
|
|
|
|
r_rsb: rsb@1f03400 {
|
|
compatible = "allwinner,sun8i-a23-rsb";
|
|
reg = <0x01f03400 0x400>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu 6>;
|
|
clock-frequency = <3000000>;
|
|
resets = <&r_ccu 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_rsb_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
wdt0: watchdog@1c20ca0 {
|
|
compatible = "allwinner,sun50i-a64-wdt",
|
|
"allwinner,sun6i-a31-wdt";
|
|
reg = <0x01c20ca0 0x20>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|