uboot/u-boot-stm32mp-2020.01/arch/arm/dts/sam9x60.dtsi

320 lines
7.8 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* sam9x60.dtsi - Device Tree Include file for SAM9X60 SoC.
*
* Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
*
* Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
*/
#include "skeleton.dtsi"
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/{
model = "Microchip SAM9X60 SoC";
compatible = "microchip,sam9x60";
aliases {
serial0 = &dbgu;
gpio0 = &pioA;
gpio1 = &pioB;
gpio3 = &pioD;
spi0 = &qspi;
};
clocks {
slow_xtal: slow_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
main_xtal: main_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdhci0: sdhci-host@80000000 {
compatible = "microchip,sam9x60-sdhci";
reg = <0x80000000 0x300>;
clocks = <&sdhci0_clk>, <&sdhci0_gclk>, <&main>;
clock-names = "hclock", "multclk", "baseclk";
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci0>;
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
qspi: spi@f0014000 {
compatible = "microchip,sam9x60-qspi";
reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
reg-names = "qspi_base", "qspi_mmap";
clocks = <&qspi_clk>, <&qspick>;
clock-names = "pclk", "qspick";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
flx0: flexcom@f801c600 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf801c000 0x200>;
clocks = <&flx0_clk>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf801c000 0x800>;
status = "disabled";
};
macb0: ethernet@f802c000 {
compatible = "cdns,sam9x60-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
clock-names = "hclk", "pclk";
clocks = <&macb0_clk>, <&macb0_clk>;
status = "disabled";
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&dbgu_clk>;
clock-names = "usart";
};
pinctrl {
#address-cells = <1>;
#size-cells = <1>;
compatible = "microchip,sam9x60-pinctrl", "simple-bus";
ranges = <0xfffff400 0xfffff400 0x800>;
reg = <0xfffff400 0x200 /* pioA */
0xfffff600 0x200 /* pioB */
0xfffff800 0x200 /* pioC */
0xfffffa00 0x200>; /* pioD */
/* shared pinctrl settings */
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
macb0 {
pinctrl_macb0_rmii: macb0_rmii-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
};
sdhci0 {
pinctrl_sdhci0: sdhci0 {
atmel,pins =
<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT /* PA17 CK periph A with pullup */
AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 CMD periph A with pullup */
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA15 DAT0 periph A */
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 DAT1 periph A with pullup */
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 DAT2 periph A with pullup */
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 DAT3 periph A with pullup */
};
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pioB_clk>;
};
pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
#gpio-cells = <2>;
gpio-controller;
clocks = <&pioD_clk>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9x5-pmc";
reg = <0xfffffc00 0x200>;
#address-cells = <1>;
#size-cells = <0>;
main: mainck {
compatible = "atmel,at91sam9x5-clk-main";
#clock-cells = <0>;
};
plla: pllack {
compatible = "microchip,sam9x60-clk-pll";
#clock-cells = <0>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <8000000 24000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <140000000 1200000000 0 0>;
};
mck: masterck {
compatible = "atmel,at91sam9x5-clk-master";
#clock-cells = <0>;
clocks = <&md_slck>, <&main>, <&plla>;
atmel,clk-output-range = <140000000 200000000>;
atmel,clk-divisors = <1 2 4 6>;
};
system: systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
qspick: qspick {
#clock-cells = <0>;
reg = <19>;
clocks = <&mck>;
};
};
periph: periphck {
compatible = "microchip,sam9x60-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <2>;
};
pioB_clk: pioB_clk {
#clock-cells = <0>;
reg = <3>;
};
flx0_clk: flx0_clk {
#clock-cells = <0>;
reg = <5>;
};
pioD_clk: pioD_clk {
#clock-cells = <0>;
reg = <44>;
};
sdhci0_clk: sdhci0_clk {
#clock-cells = <0>;
reg = <12>;
};
dbgu_clk: dbgu_clk {
#clock-cells = <0>;
reg = <47>;
};
macb0_clk: macb0_clk {
#clock-cells = <0>;
reg = <24>;
};
qspi_clk: qspi_clk {
#clock-cells = <0>;
reg = <35>;
};
};
generic: gck {
compatible = "microchip,sam9x60-clk-generated";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&md_slck>, <&td_slck>, <&main>, <&mck>, <&plla>;
sdhci0_gclk: sdhci0_gclk {
#clock-cells = <0>;
reg = <12>;
};
};
};
pit: timer@fffffe40 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe40 0x10>;
clocks = <&mck>;
};
slowckc: sckc@fffffe50 {
compatible = "atmel,at91sam9x5-sckc";
reg = <0xfffffe50 0x4>;
slow_osc: slow_osc {
compatible = "atmel,at91sam9x5-clk-slow-osc";
#clock-cells = <0>;
clocks = <&slow_xtal>;
};
slow_rc_osc: slow_rc_osc {
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
#clock-cells = <0>;
clock-frequency = <32768>;
};
td_slck: td_slck {
compatible = "atmel,at91sam9x5-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc>, <&slow_osc>;
};
md_slck: md_slck {
compatible = "atmel,at91sam9x5-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc>;
};
};
};
};
onewire_tm: onewire {
compatible = "w1-gpio";
status = "disabled";
};
};