uboot/u-boot-stm32mp-2020.01/arch/arm/dts/armada-38x-controlcenterdc.dts

589 lines
9.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for the Guntermann & Drunck ControlCenter-Compact board
*
* Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
*
* based on the Device Tree file for Marvell Armada 388 evaluation board
* (DB-88F6820), which is
*
* Copyright (C) 2014 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
/dts-v1/;
#include "armada-388.dtsi"
&gpio0 {
u-boot,dm-pre-reloc;
};
&gpio1 {
u-boot,dm-pre-reloc;
};
&uart0 {
u-boot,dm-pre-reloc;
};
&uart1 {
u-boot,dm-pre-reloc;
};
/ {
model = "Controlcenter Digital Compact";
compatible = "marvell,a385-db", "marvell,armada388",
"marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS1,115200 earlyprintk";
stdout-path = "/soc/internal-regs/serial@12100";
};
aliases {
ethernet0 = &eth0;
ethernet2 = &eth2;
mdio-gpio0 = &MDIO0;
mdio-gpio1 = &MDIO1;
mdio-gpio2 = &MDIO2;
spi0 = &spi0;
spi1 = &spi1;
i2c0 = &I2C0;
i2c1 = &I2C1;
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>; /* 256 MB */
};
clocks {
sc16isclk: sc16isclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11059200>;
};
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
I2C0: i2c@11000 {
status = "okay";
clock-frequency = <1000000>;
u-boot,dm-pre-reloc;
PCA21: pca9698@21 {
compatible = "nxp,pca9698";
reg = <0x21>;
#gpio-cells = <2>;
gpio-controller;
};
PCA22: pca9698@22 {
compatible = "nxp,pca9698";
u-boot,dm-pre-reloc;
reg = <0x22>;
#gpio-cells = <2>;
gpio-controller;
};
PCA23: pca9698@23 {
compatible = "nxp,pca9698";
reg = <0x23>;
#gpio-cells = <2>;
gpio-controller;
};
PCA24: pca9698@24 {
compatible = "nxp,pca9698";
reg = <0x24>;
#gpio-cells = <2>;
gpio-controller;
};
PCA25: pca9698@25 {
compatible = "nxp,pca9698";
reg = <0x25>;
#gpio-cells = <2>;
gpio-controller;
};
PCA26: pca9698@26 {
compatible = "nxp,pca9698";
reg = <0x26>;
#gpio-cells = <2>;
gpio-controller;
};
};
I2C1: i2c@11100 {
status = "okay";
clock-frequency = <400000>;
at97sc3205t@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
u-boot,i2c-offset-len = <0>;
};
emc2305@2d {
compatible = "smsc,emc2305";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2d>;
fan@0 {
reg = <0>;
};
fan@1 {
reg = <1>;
};
fan@2 {
reg = <2>;
};
fan@3 {
reg = <3>;
};
fan@4 {
reg = <4>;
};
};
lm77@48 {
compatible = "national,lm77";
reg = <0x48>;
};
ads1015@49 {
compatible = "ti,ads1015";
reg = <0x49>;
};
lm77@4a {
compatible = "national,lm77";
reg = <0x4a>;
};
ads1015@4b {
compatible = "ti,ads1015";
reg = <0x4b>;
};
emc2305@4c {
compatible = "smsc,emc2305";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4c>;
fan@0 {
reg = <0>;
};
fan@1 {
reg = <1>;
};
fan@2 {
reg = <2>;
};
fan@3 {
reg = <3>;
};
fan@4 {
reg = <4>;
};
};
at24c512@54 {
compatible = "atmel,24c512";
reg = <0x54>;
u-boot,i2c-offset-len = <2>;
};
ds1339@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
serial@12000 {
status = "okay";
};
serial@12100 {
status = "okay";
};
ethernet@34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
};
usb@58000 {
status = "ok";
};
ethernet@70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
mdio@72004 {
phy0: ethernet-phy@0 {
reg = <1>;
};
phy1: ethernet-phy@1 {
reg = <0>;
};
};
sata@a8000 {
status = "okay";
};
sdhci@d8000 {
broken-cd;
wp-inverted;
bus-width = <4>;
status = "okay";
no-1-8-v;
};
usb3@f0000 {
status = "okay";
};
};
pcie {
status = "okay";
/*
* The two PCIe units are accessible through
* standard PCIe slots on the board.
*/
pcie@3,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};
MDIO0: mdio0 {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = < /*MDC*/ &gpio0 13 0
/*MDIO*/ &gpio0 14 0>;
mv88e1240@0 {
reg = <0x0>;
};
mv88e1240@1 {
reg = <0x1>;
};
mv88e1240@2 {
reg = <0x2>;
};
mv88e1240@3 {
reg = <0x3>;
};
mv88e1240@4 {
reg = <0x4>;
};
mv88e1240@5 {
reg = <0x5>;
};
mv88e1240@6 {
reg = <0x6>;
};
mv88e1240@7 {
reg = <0x7>;
};
mv88e1240@8 {
reg = <0x8>;
};
mv88e1240@9 {
reg = <0x9>;
};
mv88e1240@a {
reg = <0xa>;
};
mv88e1240@b {
reg = <0xb>;
};
mv88e1240@c {
reg = <0xc>;
};
mv88e1240@d {
reg = <0xd>;
};
mv88e1240@e {
reg = <0xe>;
};
mv88e1240@f {
reg = <0xf>;
};
mv88e1240@10 {
reg = <0x10>;
};
mv88e1240@11 {
reg = <0x11>;
};
mv88e1240@12 {
reg = <0x12>;
};
mv88e1240@13 {
reg = <0x13>;
};
mv88e1240@14 {
reg = <0x14>;
};
mv88e1240@15 {
reg = <0x15>;
};
mv88e1240@16 {
reg = <0x16>;
};
mv88e1240@17 {
reg = <0x17>;
};
mv88e1240@18 {
reg = <0x18>;
};
mv88e1240@19 {
reg = <0x19>;
};
mv88e1240@1a {
reg = <0x1a>;
};
mv88e1240@1b {
reg = <0x1b>;
};
mv88e1240@1c {
reg = <0x1c>;
};
mv88e1240@1d {
reg = <0x1d>;
};
mv88e1240@1e {
reg = <0x1e>;
};
mv88e1240@1f {
reg = <0x1f>;
};
};
MDIO1: mdio1 {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = < /*MDC*/ &gpio0 25 0
/*MDIO*/ &gpio1 13 0>;
mv88e1240@0 {
reg = <0x0>;
};
mv88e1240@1 {
reg = <0x1>;
};
mv88e1240@2 {
reg = <0x2>;
};
mv88e1240@3 {
reg = <0x3>;
};
mv88e1240@4 {
reg = <0x4>;
};
mv88e1240@5 {
reg = <0x5>;
};
mv88e1240@6 {
reg = <0x6>;
};
mv88e1240@7 {
reg = <0x7>;
};
mv88e1240@8 {
reg = <0x8>;
};
mv88e1240@9 {
reg = <0x9>;
};
mv88e1240@a {
reg = <0xa>;
};
mv88e1240@b {
reg = <0xb>;
};
mv88e1240@c {
reg = <0xc>;
};
mv88e1240@d {
reg = <0xd>;
};
mv88e1240@e {
reg = <0xe>;
};
mv88e1240@f {
reg = <0xf>;
};
mv88e1240@10 {
reg = <0x10>;
};
mv88e1240@11 {
reg = <0x11>;
};
mv88e1240@12 {
reg = <0x12>;
};
mv88e1240@13 {
reg = <0x13>;
};
mv88e1240@14 {
reg = <0x14>;
};
mv88e1240@15 {
reg = <0x15>;
};
mv88e1240@16 {
reg = <0x16>;
};
mv88e1240@17 {
reg = <0x17>;
};
mv88e1240@18 {
reg = <0x18>;
};
mv88e1240@19 {
reg = <0x19>;
};
mv88e1240@1a {
reg = <0x1a>;
};
mv88e1240@1b {
reg = <0x1b>;
};
mv88e1240@1c {
reg = <0x1c>;
};
mv88e1240@1d {
reg = <0x1d>;
};
mv88e1240@1e {
reg = <0x1e>;
};
mv88e1240@1f {
reg = <0x1f>;
};
};
MDIO2: mdio2 {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = < /*MDC*/ &gpio1 14 0
/*MDIO*/ &gpio0 24 0>;
mv88e1240@0 {
reg = <0x0>;
};
mv88e1240@1 {
reg = <0x1>;
};
mv88e1240@2 {
reg = <0x2>;
};
mv88e1240@3 {
reg = <0x3>;
};
mv88e1240@4 {
reg = <0x4>;
};
mv88e1240@5 {
reg = <0x5>;
};
mv88e1240@6 {
reg = <0x6>;
};
mv88e1240@7 {
reg = <0x7>;
};
mv88e1240@8 {
reg = <0x8>;
};
mv88e1240@9 {
reg = <0x9>;
};
mv88e1240@a {
reg = <0xa>;
};
mv88e1240@b {
reg = <0xb>;
};
mv88e1240@c {
reg = <0xc>;
};
mv88e1240@d {
reg = <0xd>;
};
mv88e1240@e {
reg = <0xe>;
};
mv88e1240@f {
reg = <0xf>;
};
mv88e1240@10 {
reg = <0x10>;
};
mv88e1240@11 {
reg = <0x11>;
};
mv88e1240@12 {
reg = <0x12>;
};
mv88e1240@13 {
reg = <0x13>;
};
mv88e1240@14 {
reg = <0x14>;
};
mv88e1240@15 {
reg = <0x15>;
};
};
};
leds {
compatible = "gpio-leds";
finder_led {
label = "finder-led";
gpios = <&PCA22 25 0>;
};
status_led {
label = "status-led";
gpios = <&gpio0 29 0>;
};
};
};
&spi0 {
status = "okay";
sc16is741: sc16is741@0 {
compatible = "nxp,sc16is741";
reg = <0>;
clocks = <&sc16isclk>;
spi-max-frequency = <4000000>;
interrupt-parent = <&gpio0>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
};
};
&spi1 {
status = "okay";
u-boot,dm-pre-reloc;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q016a", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
spi-flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a11", "jedec,spi-nor";
reg = <1>; /* Chip select 1 */
spi-max-frequency = <108000000>;
u-boot,dm-pre-reloc;
};
};