uboot/u-boot-stm32mp-2020.01/drivers/misc/ihs_fpga.c

868 lines
22 KiB
C
Raw Normal View History

2024-01-10 06:52:34 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2017
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*
* based on the ioep-fpga driver, which is
*
* (C) Copyright 2014
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*/
#include <common.h>
#include <dm.h>
#include <regmap.h>
#include <asm/gpio.h>
#include "ihs_fpga.h"
/**
* struct ihs_fpga_priv - Private data structure for IHS FPGA driver
* @map: Register map for the FPGA's own register space
* @reset_gpio: GPIO to start FPGA reconfiguration
* @done_gpio: GPOI to read the 'ready' status of the FPGA
*/
struct ihs_fpga_priv {
struct regmap *map;
struct gpio_desc reset_gpio;
struct gpio_desc done_gpio;
};
/* Test pattern for reflection test */
const u16 REFLECTION_TESTPATTERN = 0xdead;
/* Delay (in ms) for each round in the reflection test */
const uint REFLECTION_TEST_DELAY = 100;
/* Maximum number of rounds in the reflection test */
const uint REFLECTION_TEST_ROUNDS = 5;
/* Delay (in ms) for each round waiting for the FPGA's done GPIO */
const uint FPGA_DONE_WAIT_DELAY = 100;
/* Maximum number of rounds for waiting for the FPGA's done GPIO */
const uint FPGA_DONE_WAIT_ROUND = 5;
/**
* enum pcb_video_type - Video type of the PCB
* @PCB_DVI_SL: Video type is DVI single-link
* @PCB_DP_165MPIX: Video type is DisplayPort (165Mpix)
* @PCB_DP_300MPIX: Video type is DisplayPort (300Mpix)
* @PCB_HDMI: Video type is HDMI
* @PCB_DP_1_2: Video type is DisplayPort 1.2
* @PCB_HDMI_2_0: Video type is HDMI 2.0
*/
enum pcb_video_type {
PCB_DVI_SL,
PCB_DP_165MPIX,
PCB_DP_300MPIX,
PCB_HDMI,
PCB_DP_1_2,
PCB_HDMI_2_0,
};
/**
* enum pcb_transmission_type - Transmission type of the PCB
* @PCB_CAT_1G: Transmission type is 1G Ethernet
* @PCB_FIBER_3G: Transmission type is 3G Fiber
* @PCB_CAT_10G: Transmission type is 10G Ethernet
* @PCB_FIBER_10G: Transmission type is 10G Fiber
*/
enum pcb_transmission_type {
PCB_CAT_1G,
PCB_FIBER_3G,
PCB_CAT_10G,
PCB_FIBER_10G,
};
/**
* enum carrier_speed - Speed of the FPGA's carrier
* @CARRIER_SPEED_1G: The carrier speed is 1G
* @CARRIER_SPEED_2_5G: The carrier speed is 2.5G
* @CARRIER_SPEED_3G: The carrier speed is 3G
* @CARRIER_SPEED_10G: The carrier speed is 10G
*/
enum carrier_speed {
CARRIER_SPEED_1G,
CARRIER_SPEED_3G,
CARRIER_SPEED_2_5G = CARRIER_SPEED_3G,
CARRIER_SPEED_10G,
};
/**
* enum ram_config - FPGA's RAM configuration
* @RAM_DDR2_32BIT_295MBPS: DDR2 32 bit at 295Mb/s
* @RAM_DDR3_32BIT_590MBPS: DDR3 32 bit at 590Mb/s
* @RAM_DDR3_48BIT_590MBPS: DDR3 48 bit at 590Mb/s
* @RAM_DDR3_64BIT_1800MBPS: DDR3 64 bit at 1800Mb/s
* @RAM_DDR3_48BIT_1800MBPS: DDR3 48 bit at 1800Mb/s
*/
enum ram_config {
RAM_DDR2_32BIT_295MBPS,
RAM_DDR3_32BIT_590MBPS,
RAM_DDR3_48BIT_590MBPS,
RAM_DDR3_64BIT_1800MBPS,
RAM_DDR3_48BIT_1800MBPS,
};
/**
* enum sysclock - Speed of the FPGA's system clock
* @SYSCLK_147456: System clock is 147.456 MHz
*/
enum sysclock {
SYSCLK_147456,
};
/**
* struct fpga_versions - Data read from the versions register
* @video_channel: Is the FPGA for a video channel (true) or main
* channel (false) device?
* @con_side: Is the FPGA for a CON (true) or a CPU (false) device?
* @pcb_video_type: Defines for whch video type the FPGA is configured
* @pcb_transmission_type: Defines for which transmission type the FPGA is
* configured
* @hw_version: Hardware version of the FPGA
*/
struct fpga_versions {
bool video_channel;
bool con_side;
enum pcb_video_type pcb_video_type;
enum pcb_transmission_type pcb_transmission_type;
unsigned int hw_version;
};
/**
* struct fpga_features - Data read from the features register
* @video_channels: Number of video channels supported
* @carriers: Number of carrier channels supported
* @carrier_speed: Speed of carriers
* @ram_config: RAM configuration of FPGA
* @sysclock: System clock speed of FPGA
* @pcm_tx: Support for PCM transmission
* @pcm_rx: Support for PCM reception
* @spdif_tx: Support for SPDIF audio transmission
* @spdif_rx: Support for SPDIF audio reception
* @usb2: Support for transparent USB2.0
* @rs232: Support for bidirectional RS232
* @compression_type1: Support for compression type 1
* @compression_type2: Support for compression type 2
* @compression_type3: Support for compression type 3
* @interlace: Support for interlace image formats
* @osd: Support for a OSD
* @compression_pipes: Number of compression pipes supported
*/
struct fpga_features {
u8 video_channels;
u8 carriers;
enum carrier_speed carrier_speed;
enum ram_config ram_config;
enum sysclock sysclock;
bool pcm_tx;
bool pcm_rx;
bool spdif_tx;
bool spdif_rx;
bool usb2;
bool rs232;
bool compression_type1;
bool compression_type2;
bool compression_type3;
bool interlace;
bool osd;
bool compression_pipes;
};
#ifdef CONFIG_SYS_FPGA_FLAVOR_GAZERBEAM
/**
* get_versions() - Fill structure with info from version register.
* @dev: FPGA device to be queried for information
* @versions: Pointer to the structure to fill with information from the
* versions register
* Return: 0
*/
static int get_versions(struct udevice *dev, struct fpga_versions *versions)
{
struct ihs_fpga_priv *priv = dev_get_priv(dev);
enum {
VERSIONS_FPGA_VIDEO_CHANNEL = BIT(12),
VERSIONS_FPGA_CON_SIDE = BIT(13),
VERSIONS_FPGA_SC = BIT(14),
VERSIONS_PCB_CON = BIT(9),
VERSIONS_PCB_SC = BIT(8),
VERSIONS_PCB_VIDEO_MASK = 0x3 << 6,
VERSIONS_PCB_VIDEO_DP_1_2 = 0x0 << 6,
VERSIONS_PCB_VIDEO_HDMI_2_0 = 0x1 << 6,
VERSIONS_PCB_TRANSMISSION_MASK = 0x3 << 4,
VERSIONS_PCB_TRANSMISSION_FIBER_10G = 0x0 << 4,
VERSIONS_PCB_TRANSMISSION_CAT_10G = 0x1 << 4,
VERSIONS_PCB_TRANSMISSION_FIBER_3G = 0x2 << 4,
VERSIONS_PCB_TRANSMISSION_CAT_1G = 0x3 << 4,
VERSIONS_HW_VER_MASK = 0xf << 0,
};
u16 raw_versions;
memset(versions, 0, sizeof(struct fpga_versions));
ihs_fpga_get(priv->map, versions, &raw_versions);
versions->video_channel = raw_versions & VERSIONS_FPGA_VIDEO_CHANNEL;
versions->con_side = raw_versions & VERSIONS_FPGA_CON_SIDE;
switch (raw_versions & VERSIONS_PCB_VIDEO_MASK) {
case VERSIONS_PCB_VIDEO_DP_1_2:
versions->pcb_video_type = PCB_DP_1_2;
break;
case VERSIONS_PCB_VIDEO_HDMI_2_0:
versions->pcb_video_type = PCB_HDMI_2_0;
break;
}
switch (raw_versions & VERSIONS_PCB_TRANSMISSION_MASK) {
case VERSIONS_PCB_TRANSMISSION_FIBER_10G:
versions->pcb_transmission_type = PCB_FIBER_10G;
break;
case VERSIONS_PCB_TRANSMISSION_CAT_10G:
versions->pcb_transmission_type = PCB_CAT_10G;
break;
case VERSIONS_PCB_TRANSMISSION_FIBER_3G:
versions->pcb_transmission_type = PCB_FIBER_3G;
break;
case VERSIONS_PCB_TRANSMISSION_CAT_1G:
versions->pcb_transmission_type = PCB_CAT_1G;
break;
}
versions->hw_version = raw_versions & VERSIONS_HW_VER_MASK;
return 0;
}
/**
* get_features() - Fill structure with info from features register.
* @dev: FPGA device to be queried for information
* @features: Pointer to the structure to fill with information from the
* features register
* Return: 0
*/
static int get_features(struct udevice *dev, struct fpga_features *features)
{
struct ihs_fpga_priv *priv = dev_get_priv(dev);
enum {
FEATURE_SPDIF_RX = BIT(15),
FEATURE_SPDIF_TX = BIT(14),
FEATURE_PCM_RX = BIT(13),
FEATURE_PCM_TX = BIT(12),
FEATURE_RAM_MASK = GENMASK(11, 8),
FEATURE_RAM_DDR2_32BIT_295MBPS = 0x0 << 8,
FEATURE_RAM_DDR3_32BIT_590MBPS = 0x1 << 8,
FEATURE_RAM_DDR3_48BIT_590MBPS = 0x2 << 8,
FEATURE_RAM_DDR3_64BIT_1800MBPS = 0x3 << 8,
FEATURE_RAM_DDR3_48BIT_1800MBPS = 0x4 << 8,
FEATURE_CARRIER_SPEED_MASK = GENMASK(7, 6),
FEATURE_CARRIER_SPEED_1G = 0x0 << 6,
FEATURE_CARRIER_SPEED_2_5G = 0x1 << 6,
FEATURE_CARRIER_SPEED_10G = 0x2 << 6,
FEATURE_CARRIERS_MASK = GENMASK(5, 4),
FEATURE_CARRIERS_0 = 0x0 << 4,
FEATURE_CARRIERS_1 = 0x1 << 4,
FEATURE_CARRIERS_2 = 0x2 << 4,
FEATURE_CARRIERS_4 = 0x3 << 4,
FEATURE_USB2 = BIT(3),
FEATURE_VIDEOCHANNELS_MASK = GENMASK(2, 0),
FEATURE_VIDEOCHANNELS_0 = 0x0 << 0,
FEATURE_VIDEOCHANNELS_1 = 0x1 << 0,
FEATURE_VIDEOCHANNELS_1_1 = 0x2 << 0,
FEATURE_VIDEOCHANNELS_2 = 0x3 << 0,
};
enum {
EXT_FEATURE_OSD = BIT(15),
EXT_FEATURE_ETHERNET = BIT(9),
EXT_FEATURE_INTERLACE = BIT(8),
EXT_FEATURE_RS232 = BIT(7),
EXT_FEATURE_COMPRESSION_PERF_MASK = GENMASK(6, 4),
EXT_FEATURE_COMPRESSION_PERF_1X = 0x0 << 4,
EXT_FEATURE_COMPRESSION_PERF_2X = 0x1 << 4,
EXT_FEATURE_COMPRESSION_PERF_4X = 0x2 << 4,
EXT_FEATURE_COMPRESSION_TYPE1 = BIT(0),
EXT_FEATURE_COMPRESSION_TYPE2 = BIT(1),
EXT_FEATURE_COMPRESSION_TYPE3 = BIT(2),
};
u16 raw_features;
u16 raw_extended_features;
memset(features, 0, sizeof(struct fpga_features));
ihs_fpga_get(priv->map, features, &raw_features);
ihs_fpga_get(priv->map, extended_features, &raw_extended_features);
switch (raw_features & FEATURE_VIDEOCHANNELS_MASK) {
case FEATURE_VIDEOCHANNELS_0:
features->video_channels = 0;
break;
case FEATURE_VIDEOCHANNELS_1:
features->video_channels = 1;
break;
case FEATURE_VIDEOCHANNELS_1_1:
case FEATURE_VIDEOCHANNELS_2:
features->video_channels = 2;
break;
};
switch (raw_features & FEATURE_CARRIERS_MASK) {
case FEATURE_CARRIERS_0:
features->carriers = 0;
break;
case FEATURE_CARRIERS_1:
features->carriers = 1;
break;
case FEATURE_CARRIERS_2:
features->carriers = 2;
break;
case FEATURE_CARRIERS_4:
features->carriers = 4;
break;
}
switch (raw_features & FEATURE_CARRIER_SPEED_MASK) {
case FEATURE_CARRIER_SPEED_1G:
features->carrier_speed = CARRIER_SPEED_1G;
break;
case FEATURE_CARRIER_SPEED_2_5G:
features->carrier_speed = CARRIER_SPEED_2_5G;
break;
case FEATURE_CARRIER_SPEED_10G:
features->carrier_speed = CARRIER_SPEED_10G;
break;
}
switch (raw_features & FEATURE_RAM_MASK) {
case FEATURE_RAM_DDR2_32BIT_295MBPS:
features->ram_config = RAM_DDR2_32BIT_295MBPS;
break;
case FEATURE_RAM_DDR3_32BIT_590MBPS:
features->ram_config = RAM_DDR3_32BIT_590MBPS;
break;
case FEATURE_RAM_DDR3_48BIT_590MBPS:
features->ram_config = RAM_DDR3_48BIT_590MBPS;
break;
case FEATURE_RAM_DDR3_64BIT_1800MBPS:
features->ram_config = RAM_DDR3_64BIT_1800MBPS;
break;
case FEATURE_RAM_DDR3_48BIT_1800MBPS:
features->ram_config = RAM_DDR3_48BIT_1800MBPS;
break;
}
features->pcm_tx = raw_features & FEATURE_PCM_TX;
features->pcm_rx = raw_features & FEATURE_PCM_RX;
features->spdif_tx = raw_features & FEATURE_SPDIF_TX;
features->spdif_rx = raw_features & FEATURE_SPDIF_RX;
features->usb2 = raw_features & FEATURE_USB2;
features->rs232 = raw_extended_features & EXT_FEATURE_RS232;
features->compression_type1 = raw_extended_features &
EXT_FEATURE_COMPRESSION_TYPE1;
features->compression_type2 = raw_extended_features &
EXT_FEATURE_COMPRESSION_TYPE2;
features->compression_type3 = raw_extended_features &
EXT_FEATURE_COMPRESSION_TYPE3;
features->interlace = raw_extended_features & EXT_FEATURE_INTERLACE;
features->osd = raw_extended_features & EXT_FEATURE_OSD;
features->compression_pipes = raw_extended_features &
EXT_FEATURE_COMPRESSION_PERF_MASK;
return 0;
}
#else
/**
* get_versions() - Fill structure with info from version register.
* @fpga: Identifier of the FPGA device to be queried for information
* @versions: Pointer to the structure to fill with information from the
* versions register
*
* This is the legacy version and should be considered deprecated for new
* devices.
*
* Return: 0
*/
static int get_versions(unsigned int fpga, struct fpga_versions *versions)
{
enum {
/* HW version encoding is a mess, leave it for the moment */
VERSIONS_HW_VER_MASK = 0xf << 0,
VERSIONS_PIX_CLOCK_GEN_IDT8N3QV01 = BIT(4),
VERSIONS_SFP = BIT(5),
VERSIONS_VIDEO_MASK = 0x7 << 6,
VERSIONS_VIDEO_DVI = 0x0 << 6,
VERSIONS_VIDEO_DP_165 = 0x1 << 6,
VERSIONS_VIDEO_DP_300 = 0x2 << 6,
VERSIONS_VIDEO_HDMI = 0x3 << 6,
VERSIONS_UT_MASK = 0xf << 12,
VERSIONS_UT_MAIN_SERVER = 0x0 << 12,
VERSIONS_UT_MAIN_USER = 0x1 << 12,
VERSIONS_UT_VIDEO_SERVER = 0x2 << 12,
VERSIONS_UT_VIDEO_USER = 0x3 << 12,
};
u16 raw_versions;
memset(versions, 0, sizeof(struct fpga_versions));
FPGA_GET_REG(fpga, versions, &raw_versions);
switch (raw_versions & VERSIONS_UT_MASK) {
case VERSIONS_UT_MAIN_SERVER:
versions->video_channel = false;
versions->con_side = false;
break;
case VERSIONS_UT_MAIN_USER:
versions->video_channel = false;
versions->con_side = true;
break;
case VERSIONS_UT_VIDEO_SERVER:
versions->video_channel = true;
versions->con_side = false;
break;
case VERSIONS_UT_VIDEO_USER:
versions->video_channel = true;
versions->con_side = true;
break;
}
switch (raw_versions & VERSIONS_VIDEO_MASK) {
case VERSIONS_VIDEO_DVI:
versions->pcb_video_type = PCB_DVI_SL;
break;
case VERSIONS_VIDEO_DP_165:
versions->pcb_video_type = PCB_DP_165MPIX;
break;
case VERSIONS_VIDEO_DP_300:
versions->pcb_video_type = PCB_DP_300MPIX;
break;
case VERSIONS_VIDEO_HDMI:
versions->pcb_video_type = PCB_HDMI;
break;
}
versions->hw_version = raw_versions & VERSIONS_HW_VER_MASK;
if (raw_versions & VERSIONS_SFP)
versions->pcb_transmission_type = PCB_FIBER_3G;
else
versions->pcb_transmission_type = PCB_CAT_1G;
return 0;
}
/**
* get_features() - Fill structure with info from features register.
* @fpga: Identifier of the FPGA device to be queried for information
* @features: Pointer to the structure to fill with information from the
* features register
*
* This is the legacy version and should be considered deprecated for new
* devices.
*
* Return: 0
*/
static int get_features(unsigned int fpga, struct fpga_features *features)
{
enum {
FEATURE_CARRIER_SPEED_2_5 = BIT(4),
FEATURE_RAM_MASK = 0x7 << 5,
FEATURE_RAM_DDR2_32BIT = 0x0 << 5,
FEATURE_RAM_DDR3_32BIT = 0x1 << 5,
FEATURE_RAM_DDR3_48BIT = 0x2 << 5,
FEATURE_PCM_AUDIO_TX = BIT(9),
FEATURE_PCM_AUDIO_RX = BIT(10),
FEATURE_OSD = BIT(11),
FEATURE_USB20 = BIT(12),
FEATURE_COMPRESSION_MASK = 7 << 13,
FEATURE_COMPRESSION_TYPE1 = 0x1 << 13,
FEATURE_COMPRESSION_TYPE1_TYPE2 = 0x3 << 13,
FEATURE_COMPRESSION_TYPE1_TYPE2_TYPE3 = 0x7 << 13,
};
enum {
EXTENDED_FEATURE_SPDIF_AUDIO_TX = BIT(0),
EXTENDED_FEATURE_SPDIF_AUDIO_RX = BIT(1),
EXTENDED_FEATURE_RS232 = BIT(2),
EXTENDED_FEATURE_COMPRESSION_PIPES = BIT(3),
EXTENDED_FEATURE_INTERLACE = BIT(4),
};
u16 raw_features;
u16 raw_extended_features;
memset(features, 0, sizeof(struct fpga_features));
FPGA_GET_REG(fpga, fpga_features, &raw_features);
FPGA_GET_REG(fpga, fpga_ext_features, &raw_extended_features);
features->video_channels = raw_features & 0x3;
features->carriers = (raw_features >> 2) & 0x3;
features->carrier_speed = (raw_features & FEATURE_CARRIER_SPEED_2_5)
? CARRIER_SPEED_2_5G : CARRIER_SPEED_1G;
switch (raw_features & FEATURE_RAM_MASK) {
case FEATURE_RAM_DDR2_32BIT:
features->ram_config = RAM_DDR2_32BIT_295MBPS;
break;
case FEATURE_RAM_DDR3_32BIT:
features->ram_config = RAM_DDR3_32BIT_590MBPS;
break;
case FEATURE_RAM_DDR3_48BIT:
features->ram_config = RAM_DDR3_48BIT_590MBPS;
break;
}
features->pcm_tx = raw_features & FEATURE_PCM_AUDIO_TX;
features->pcm_rx = raw_features & FEATURE_PCM_AUDIO_RX;
features->spdif_tx = raw_extended_features &
EXTENDED_FEATURE_SPDIF_AUDIO_TX;
features->spdif_rx = raw_extended_features &
EXTENDED_FEATURE_SPDIF_AUDIO_RX;
features->usb2 = raw_features & FEATURE_USB20;
features->rs232 = raw_extended_features & EXTENDED_FEATURE_RS232;
features->compression_type1 = false;
features->compression_type2 = false;
features->compression_type3 = false;
switch (raw_features & FEATURE_COMPRESSION_MASK) {
case FEATURE_COMPRESSION_TYPE1_TYPE2_TYPE3:
features->compression_type3 = true;
/* fall-through */
case FEATURE_COMPRESSION_TYPE1_TYPE2:
features->compression_type2 = true;
/* fall-through */
case FEATURE_COMPRESSION_TYPE1:
features->compression_type1 = true;
break;
}
features->interlace = raw_extended_features &
EXTENDED_FEATURE_INTERLACE;
features->osd = raw_features & FEATURE_OSD;
features->compression_pipes = raw_extended_features &
EXTENDED_FEATURE_COMPRESSION_PIPES;
return 0;
}
#endif
/**
* fpga_print_info() - Print information about FPGA device
* @dev: FPGA device to print information about
*/
static void fpga_print_info(struct udevice *dev)
{
struct ihs_fpga_priv *priv = dev_get_priv(dev);
u16 fpga_version;
struct fpga_versions versions;
struct fpga_features features;
ihs_fpga_get(priv->map, fpga_version, &fpga_version);
get_versions(dev, &versions);
get_features(dev, &features);
if (versions.video_channel)
printf("Videochannel");
else
printf("Mainchannel");
if (versions.con_side)
printf(" User");
else
printf(" Server");
switch (versions.pcb_transmission_type) {
case PCB_CAT_1G:
case PCB_CAT_10G:
printf(" CAT");
break;
case PCB_FIBER_3G:
case PCB_FIBER_10G:
printf(" Fiber");
break;
};
switch (versions.pcb_video_type) {
case PCB_DVI_SL:
printf(" DVI,");
break;
case PCB_DP_165MPIX:
printf(" DP 165MPix/s,");
break;
case PCB_DP_300MPIX:
printf(" DP 300MPix/s,");
break;
case PCB_HDMI:
printf(" HDMI,");
break;
case PCB_DP_1_2:
printf(" DP 1.2,");
break;
case PCB_HDMI_2_0:
printf(" HDMI 2.0,");
break;
}
printf(" FPGA V %d.%02d\n features: ",
fpga_version / 100, fpga_version % 100);
if (!features.compression_type1 &&
!features.compression_type2 &&
!features.compression_type3)
printf("no compression, ");
if (features.compression_type1)
printf("type1, ");
if (features.compression_type2)
printf("type2, ");
if (features.compression_type3)
printf("type3, ");
printf("%sosd", features.osd ? "" : "no ");
if (features.pcm_rx && features.pcm_tx)
printf(", pcm rx+tx");
else if (features.pcm_rx)
printf(", pcm rx");
else if (features.pcm_tx)
printf(", pcm tx");
if (features.spdif_rx && features.spdif_tx)
printf(", spdif rx+tx");
else if (features.spdif_rx)
printf(", spdif rx");
else if (features.spdif_tx)
printf(", spdif tx");
puts(",\n ");
switch (features.sysclock) {
case SYSCLK_147456:
printf("clock 147.456 MHz");
break;
}
switch (features.ram_config) {
case RAM_DDR2_32BIT_295MBPS:
printf(", RAM 32 bit DDR2");
break;
case RAM_DDR3_32BIT_590MBPS:
printf(", RAM 32 bit DDR3");
break;
case RAM_DDR3_48BIT_590MBPS:
case RAM_DDR3_48BIT_1800MBPS:
printf(", RAM 48 bit DDR3");
break;
case RAM_DDR3_64BIT_1800MBPS:
printf(", RAM 64 bit DDR3");
break;
}
printf(", %d carrier(s)", features.carriers);
switch (features.carrier_speed) {
case CARRIER_SPEED_1G:
printf(", 1Gbit/s");
break;
case CARRIER_SPEED_3G:
printf(", 3Gbit/s");
break;
case CARRIER_SPEED_10G:
printf(", 10Gbit/s");
break;
}
printf(", %d video channel(s)\n", features.video_channels);
}
/**
* do_reflection_test() - Run reflection test on a FPGA device
* @dev: FPGA device to run reflection test on
*
* Return: 0 if reflection test succeeded, -ve on error
*/
static int do_reflection_test(struct udevice *dev)
{
struct ihs_fpga_priv *priv = dev_get_priv(dev);
int ctr = 0;
while (1) {
u16 val;
ihs_fpga_set(priv->map, reflection_low, REFLECTION_TESTPATTERN);
ihs_fpga_get(priv->map, reflection_low, &val);
if (val == (~REFLECTION_TESTPATTERN & 0xffff))
return -EIO;
mdelay(REFLECTION_TEST_DELAY);
if (ctr++ > REFLECTION_TEST_ROUNDS)
return 0;
}
}
/**
* wait_for_fpga_done() - Wait until 'done'-flag is set for FPGA device
* @dev: FPGA device whose done flag to wait for
*
* This function waits until it detects that the done-GPIO's value was changed
* to 1 by the FPGA, which indicates that the device is configured and ready to
* use.
*
* Return: 0 if done flag was detected, -ve on error
*/
static int wait_for_fpga_done(struct udevice *dev)
{
struct ihs_fpga_priv *priv = dev_get_priv(dev);
int ctr = 0;
int done_val;
while (1) {
done_val = dm_gpio_get_value(&priv->done_gpio);
if (done_val < 0) {
debug("%s: Error while reading done-GPIO (err = %d)\n",
dev->name, done_val);
return done_val;
}
if (done_val)
return 0;
mdelay(FPGA_DONE_WAIT_DELAY);
if (ctr++ > FPGA_DONE_WAIT_ROUND) {
debug("%s: FPGA init failed (done not detected)\n",
dev->name);
return -EIO;
}
}
}
static int ihs_fpga_probe(struct udevice *dev)
{
struct ihs_fpga_priv *priv = dev_get_priv(dev);
int ret;
/* TODO(mario.six@gdsys.cc): Case of FPGA attached to MCLink bus */
ret = regmap_init_mem(dev_ofnode(dev), &priv->map);
if (ret) {
debug("%s: Could not initialize regmap (err = %d)",
dev->name, ret);
return ret;
}
ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset_gpio,
GPIOD_IS_OUT);
if (ret) {
debug("%s: Could not get reset-GPIO (err = %d)\n",
dev->name, ret);
return ret;
}
if (!priv->reset_gpio.dev) {
debug("%s: Could not get reset-GPIO\n", dev->name);
return -ENOENT;
}
ret = gpio_request_by_name(dev, "done-gpios", 0, &priv->done_gpio,
GPIOD_IS_IN);
if (ret) {
debug("%s: Could not get done-GPIO (err = %d)\n",
dev->name, ret);
return ret;
}
if (!priv->done_gpio.dev) {
debug("%s: Could not get done-GPIO\n", dev->name);
return -ENOENT;
}
ret = dm_gpio_set_value(&priv->reset_gpio, 1);
if (ret) {
debug("%s: Error while setting reset-GPIO (err = %d)\n",
dev->name, ret);
return ret;
}
/* If FPGA already runs, don't initialize again */
if (do_reflection_test(dev))
goto reflection_ok;
ret = dm_gpio_set_value(&priv->reset_gpio, 0);
if (ret) {
debug("%s: Error while setting reset-GPIO (err = %d)\n",
dev->name, ret);
return ret;
}
ret = wait_for_fpga_done(dev);
if (ret) {
debug("%s: Error while waiting for FPGA done (err = %d)\n",
dev->name, ret);
return ret;
}
udelay(10);
ret = dm_gpio_set_value(&priv->reset_gpio, 1);
if (ret) {
debug("%s: Error while setting reset-GPIO (err = %d)\n",
dev->name, ret);
return ret;
}
if (!do_reflection_test(dev)) {
debug("%s: Reflection test FAILED\n", dev->name);
return -EIO;
}
reflection_ok:
printf("%s: Reflection test passed.\n", dev->name);
fpga_print_info(dev);
return 0;
}
static const struct udevice_id ihs_fpga_ids[] = {
{ .compatible = "gdsys,iocon_fpga" },
{ .compatible = "gdsys,iocpu_fpga" },
{ }
};
U_BOOT_DRIVER(ihs_fpga_bus) = {
.name = "ihs_fpga_bus",
.id = UCLASS_MISC,
.of_match = ihs_fpga_ids,
.probe = ihs_fpga_probe,
.priv_auto_alloc_size = sizeof(struct ihs_fpga_priv),
};