uboot/u-boot-stm32mp-2020.01/arch/x86/include/asm/arch-broadwell/spi.h

87 lines
3.2 KiB
C
Raw Normal View History

2024-01-10 06:52:34 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2014 Google Inc.
*
* This file is from coreboot soc/intel/broadwell/include/soc/spi.h
*/
#ifndef _BROADWELL_SPI_H_
#define _BROADWELL_SPI_H_
/*
* SPI Opcode Menu setup for SPIBAR lockdown
* should support most common flash chips.
*/
#define SPIBAR_OFFSET 0x3800
#define SPI_REG(x) (RCB_REG(SPIBAR_OFFSET + (x)))
/* Reigsters within the SPIBAR */
#define SPIBAR_SSFC 0x91
#define SPIBAR_FDOC 0xb0
#define SPIBAR_FDOD 0xb4
#define SPIBAR_PREOP 0x94
#define SPIBAR_OPTYPE 0x96
#define SPIBAR_OPMENU_LOWER 0x98
#define SPIBAR_OPMENU_UPPER 0x9c
#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
#define SPI_OPTYPE_0 0x01 /* Write, no address */
#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */
#define SPI_OPTYPE_1 0x03 /* Write, address required */
#define SPI_OPMENU_2 0x03 /* READ: Read Data */
#define SPI_OPTYPE_2 0x02 /* Read, address required */
#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
#define SPI_OPTYPE_3 0x00 /* Read, no address */
#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
#define SPI_OPTYPE_4 0x03 /* Write, address required */
#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
#define SPI_OPTYPE_5 0x00 /* Read, no address */
#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
#define SPI_OPTYPE_6 0x03 /* Write, address required */
#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */
#define SPI_OPTYPE_7 0x02 /* Read, address required */
#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \
(SPI_OPMENU_5 << 8) | SPI_OPMENU_4)
#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \
(SPI_OPMENU_1 << 8) | SPI_OPMENU_0)
#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \
(SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \
(SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \
(SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0))
#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */
#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */
#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */
#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */
#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */
#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */
#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */
#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */
#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8)
#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */
#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */
#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */
#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */
#define SPIBAR_FADDR 0x08 /* SPI flash address */
#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */
#define SPIBAR_SSFS 0x90
#define SPIBAR_SSFS_ERROR (1 << 3)
#define SPIBAR_SSFS_DONE (1 << 2)
#define SPIBAR_SSFC 0x91
#define SPIBAR_SSFC_DATA (1 << 14)
#define SPIBAR_SSFC_GO (1 << 1)
#endif