uboot/u-boot-stm32mp-2020.01/arch/arm/include/asm/ti-common/sys_proto.h

72 lines
1.9 KiB
C
Raw Normal View History

2024-01-10 06:52:34 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2014
* Texas Instruments, <www.ti.com>
*/
#ifndef _TI_COMMON_SYS_PROTO_H_
#define _TI_COMMON_SYS_PROTO_H_
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_ARCH_OMAP2PLUS
#define TI_ARMV7_DRAM_ADDR_SPACE_START 0x80000000
#define TI_ARMV7_DRAM_ADDR_SPACE_END 0xFFFFFFFF
#define OMAP_INIT_CONTEXT_SPL 0
#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1
#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
static inline u32 running_from_sdram(void)
{
u32 pc;
asm volatile ("mov %0, pc" : "=r" (pc));
return ((pc >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
(pc < TI_ARMV7_DRAM_ADDR_SPACE_END));
}
static inline u8 uboot_loaded_by_spl(void)
{
/*
* u-boot can be running from sdram either because of configuration
* Header or by SPL. If because of CH, then the romcode sets the
* CHSETTINGS executed bit to true in the boot parameter structure that
* it passes to the bootloader.This parameter is stored in the ch_flags
* variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
* mandatory section if CH is present.
*/
if (gd->arch.omap_ch_flags & CH_FLAGS_CHSETTINGS)
return 0;
else
return running_from_sdram();
}
/*
* The basic hardware init of OMAP(s_init()) can happen in 4
* different contexts:
* 1. SPL running from SRAM
* 2. U-Boot running from FLASH
* 3. Non-XIP U-Boot loaded to SDRAM by SPL
* 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
* Configuration Header feature
*
* This function finds this context.
* Defining as inline may help in compiling out unused functions in SPL
*/
static inline u32 omap_hw_init_context(void)
{
#ifdef CONFIG_SPL_BUILD
return OMAP_INIT_CONTEXT_SPL;
#else
if (uboot_loaded_by_spl())
return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
else if (running_from_sdram())
return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
else
return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
#endif
}
#endif
#endif