uboot/u-boot-stm32mp-2020.01/arch/arm/dts/stm32f4-pinctrl.dtsi

339 lines
9.7 KiB
Plaintext
Raw Normal View History

2024-01-10 06:52:34 +00:00
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
soc {
pinctrl: pin-controller {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
interrupt-parent = <&exti>;
st,syscfg = <&syscfg 0x8>;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
bias-disable;
};
};
usart3_pins_a: usart3@0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
bias-disable;
};
};
usbotg_fs_pins_a: usbotg_fs@0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
<STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_fs_pins_b: usbotg_fs@1 {
pins {
pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
<STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
<STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
<STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
<STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
<STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
<STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
<STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
<STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
<STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
<STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
<STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
<STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
<STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */
<STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */
<STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */
<STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */
<STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
<STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
<STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */
<STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */
<STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */
<STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */
<STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */
<STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */
slew-rate = <2>;
};
};
adc3_in8_pin: adc@200 {
pins {
pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
};
};
pwm1_pins: pwm@1 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
<STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
<STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */
};
};
pwm3_pins: pwm@3 {
pins {
pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
<STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
};
};
i2c1_pins: i2c1@0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
<STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
bias-disable;
drive-open-drain;
slew-rate = <3>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
<STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
<STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
<STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
<STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
<STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
<STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
<STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
<STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
<STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/
<STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
<STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
<STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
<STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
<STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
<STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
<STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
<STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
<STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
<STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/
<STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
<STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
<STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
<STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
<STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
<STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
<STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
<STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
slew-rate = <2>;
};
};
dcmi_pins: dcmi@0 {
pins {
pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
<STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
<STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */
<STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */
<STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */
<STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */
<STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */
<STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */
<STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */
<STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */
<STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */
<STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */
<STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */
<STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */
<STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
sdio_pins: sdio_pins@0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
<STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
<STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
<STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
drive-push-pull;
slew-rate = <2>;
};
};
sdio_pins_od: sdio_pins_od@0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
<STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
<STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
drive-push-pull;
slew-rate = <2>;
};
pins2 {
pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
drive-open-drain;
slew-rate = <2>;
};
};
};
};
};