76 lines
2.4 KiB
Plaintext
76 lines
2.4 KiB
Plaintext
|
----------------------------------------
|
||
|
|
Booting from On-Chip ROM (eSDHC or eSPI)
|
||
|
|
----------------------------------------
|
||
|
|
|
||
|
|
boot_format is a tool to write SD bootable images to a filesystem and build
|
||
|
|
SD/SPI images to a binary file for writing later.
|
||
|
|
|
||
|
|
When booting from an SD card/MMC, boot_format puts the configuration file and
|
||
|
|
the RAM-based U-Boot image on the card.
|
||
|
|
When booting from an EEPROM, boot_format generates a binary image that is used
|
||
|
|
to boot from this EEPROM.
|
||
|
|
|
||
|
|
Where to get boot_format:
|
||
|
|
========================
|
||
|
|
|
||
|
|
you can browse it online at:
|
||
|
|
http://git.freescale.com/git/cgit.cgi/ppc/sdk/boot-format.git/
|
||
|
|
|
||
|
|
Building
|
||
|
|
========
|
||
|
|
|
||
|
|
Run the following to build this project
|
||
|
|
|
||
|
|
$ make
|
||
|
|
|
||
|
|
Execution
|
||
|
|
=========
|
||
|
|
|
||
|
|
boot_format runs under a regular Linux machine and requires a super user mode
|
||
|
|
to run. Execute boot_format as follows.
|
||
|
|
|
||
|
|
For building SD images by writing directly to a file system on SD media:
|
||
|
|
|
||
|
|
$ boot_format $config u-boot.bin -sd $device
|
||
|
|
|
||
|
|
Where $config is the included config.dat file for your platform and $device
|
||
|
|
is the target block device for the SD media on your computer.
|
||
|
|
|
||
|
|
For build binary images directly a local file:
|
||
|
|
|
||
|
|
$ boot_format $config u-boot.bin -spi $file
|
||
|
|
|
||
|
|
Where $file is the target file. Also keep in mind the u-boot.bin file needs
|
||
|
|
to be the u-boot built for your particular platform and target media.
|
||
|
|
|
||
|
|
Example: To generate a u-boot.bin for a P1022DS booting from SD, run the
|
||
|
|
following in the u-boot repository:
|
||
|
|
|
||
|
|
$ make P1022DS_SDCARD
|
||
|
|
|
||
|
|
Configuration Files
|
||
|
|
===================
|
||
|
|
|
||
|
|
Below are the configuration files to be used with a particular platform. Keep
|
||
|
|
in mind that some of these config files are tied to the platforms DDR speed.
|
||
|
|
Please see the SoC reference manual for more documentation.
|
||
|
|
|
||
|
|
P1022DS config_sram_p1022ds.dat
|
||
|
|
P2020DS config_sram_p2020ds.dat
|
||
|
|
P1020RDB config_ddr2_1g_p1020rdb_533M.dat
|
||
|
|
P1020RDB config_ddr2_1g_p1020rdb_667M.dat
|
||
|
|
P2020RDB config_ddr2_1g_p2020rdb_800M.dat
|
||
|
|
P2020RDB config_ddr2_1g_p2020rdb_667M.dat
|
||
|
|
P2020RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat
|
||
|
|
P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
|
||
|
|
P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
|
||
|
|
P1010RDB config_ddr3_1gb_p1010rdb_800M.dat
|
||
|
|
P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
|
||
|
|
P1022DS config_ddr3_2gb_p1022ds.dat
|
||
|
|
P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
|
||
|
|
P1025RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
|
||
|
|
P1016RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
|
||
|
|
P1020UTM config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
|
||
|
|
P1020MBG config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
|
||
|
|
MPC8536DS config_ddr2_512m_mpc8536ds_667M.dat
|