uboot/u-boot-stm32mp-2020.01/arch/arm/include/asm/arch-mx35/imx-regs.h

387 lines
8.8 KiB
C
Raw Permalink Normal View History

2024-01-10 06:52:34 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
*/
#ifndef __ASM_ARCH_MX35_H
#define __ASM_ARCH_MX35_H
#define ARCH_MXC
/*
* IRAM
*/
#define IRAM_BASE_ADDR 0x10000000 /* internal ram */
#define IRAM_SIZE 0x00020000 /* 128 KB */
#define LOW_LEVEL_SRAM_STACK 0x1001E000
/*
* AIPS 1
*/
#define AIPS1_BASE_ADDR 0x43F00000
#define AIPS1_CTRL_BASE_ADDR AIPS1_BASE_ADDR
#define MAX_BASE_ADDR 0x43F04000
#define EVTMON_BASE_ADDR 0x43F08000
#define CLKCTL_BASE_ADDR 0x43F0C000
#define I2C1_BASE_ADDR 0x43F80000
#define I2C3_BASE_ADDR 0x43F84000
#define ATA_BASE_ADDR 0x43F8C000
#define UART1_BASE 0x43F90000
#define UART2_BASE 0x43F94000
#define I2C2_BASE_ADDR 0x43F98000
#define CSPI1_BASE_ADDR 0x43FA4000
#define IOMUXC_BASE_ADDR 0x43FAC000
/*
* SPBA
*/
#define SPBA_BASE_ADDR 0x50000000
#define UART3_BASE 0x5000C000
#define CSPI2_BASE_ADDR 0x50010000
#define ATA_DMA_BASE_ADDR 0x50020000
#define FEC_BASE_ADDR 0x50038000
#define SPBA_CTRL_BASE_ADDR 0x5003C000
/*
* AIPS 2
*/
#define AIPS2_BASE_ADDR 0x53F00000
#define AIPS2_CTRL_BASE_ADDR AIPS2_BASE_ADDR
#define CCM_BASE_ADDR 0x53F80000
#define GPT1_BASE_ADDR 0x53F90000
#define EPIT1_BASE_ADDR 0x53F94000
#define EPIT2_BASE_ADDR 0x53F98000
#define GPIO3_BASE_ADDR 0x53FA4000
#define MMC_SDHC1_BASE_ADDR 0x53FB4000
#define MMC_SDHC2_BASE_ADDR 0x53FB8000
#define MMC_SDHC3_BASE_ADDR 0x53FBC000
#define IPU_CTRL_BASE_ADDR 0x53FC0000
#define GPIO1_BASE_ADDR 0x53FCC000
#define GPIO2_BASE_ADDR 0x53FD0000
#define SDMA_BASE_ADDR 0x53FD4000
#define RTC_BASE_ADDR 0x53FD8000
#define WDOG1_BASE_ADDR 0x53FDC000
#define PWM_BASE_ADDR 0x53FE0000
#define RTIC_BASE_ADDR 0x53FEC000
#define IIM_BASE_ADDR 0x53FF0000
#define IMX_USB_BASE 0x53FF4000
#define IMX_USB_PORT_OFFSET 0x400
#define IMX_CCM_BASE CCM_BASE_ADDR
/*
* ROMPATCH and AVIC
*/
#define ROMPATCH_BASE_ADDR 0x60000000
#define AVIC_BASE_ADDR 0x68000000
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define EXT_MEM_CTRL_BASE 0xB8000000
#define ESDCTL_BASE_ADDR 0xB8001000
#define WEIM_BASE_ADDR 0xB8002000
#define WEIM_CTRL_CS0 WEIM_BASE_ADDR
#define WEIM_CTRL_CS1 (WEIM_BASE_ADDR + 0x10)
#define WEIM_CTRL_CS2 (WEIM_BASE_ADDR + 0x20)
#define WEIM_CTRL_CS3 (WEIM_BASE_ADDR + 0x30)
#define WEIM_CTRL_CS4 (WEIM_BASE_ADDR + 0x40)
#define WEIM_CTRL_CS5 (WEIM_BASE_ADDR + 0x50)
#define M3IF_BASE_ADDR 0xB8003000
#define EMI_BASE_ADDR 0xB8004000
#define NFC_BASE_ADDR 0xBB000000
/*
* Memory regions and CS
*/
#define IPU_MEM_BASE_ADDR 0x70000000
#define CSD0_BASE_ADDR 0x80000000
#define CSD1_BASE_ADDR 0x90000000
#define CS0_BASE_ADDR 0xA0000000
#define CS1_BASE_ADDR 0xA8000000
#define CS2_BASE_ADDR 0xB0000000
#define CS3_BASE_ADDR 0xB2000000
#define CS4_BASE_ADDR 0xB4000000
#define CS5_BASE_ADDR 0xB6000000
/*
* IRQ Controller Register Definitions.
*/
#define AVIC_NIMASK 0x04
#define AVIC_INTTYPEH 0x18
#define AVIC_INTTYPEL 0x1C
/* L210 */
#define L2CC_BASE_ADDR 0x30000000
#define L2_CACHE_LINE_SIZE 32
#define L2_CACHE_CTL_REG 0x100
#define L2_CACHE_AUX_CTL_REG 0x104
#define L2_CACHE_SYNC_REG 0x730
#define L2_CACHE_INV_LINE_REG 0x770
#define L2_CACHE_INV_WAY_REG 0x77C
#define L2_CACHE_CLEAN_LINE_REG 0x7B0
#define L2_CACHE_CLEAN_INV_LINE_REG 0x7F0
#define L2_CACHE_DBG_CTL_REG 0xF40
#define CLKMODE_AUTO 0
#define CLKMODE_CONSUMER 1
#define PLL_PD(x) (((x) & 0xf) << 26)
#define PLL_MFD(x) (((x) & 0x3ff) << 16)
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
#define _PLL_BRM(x) ((x) << 31)
#define _PLL_PD(x) (((x) - 1) << 26)
#define _PLL_MFD(x) (((x) - 1) << 16)
#define _PLL_MFI(x) ((x) << 10)
#define _PLL_MFN(x) (x)
#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \
(_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\
_PLL_MFN(mfn))
#define CCM_MPLL_532_HZ _PLL_SETTING(1, 1, 12, 11, 1)
#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5)
#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1)
#define CSCR_U(x) (WEIM_CTRL_CS#x + 0)
#define CSCR_L(x) (WEIM_CTRL_CS#x + 4)
#define CSCR_A(x) (WEIM_CTRL_CS#x + 8)
#define IIM_SREV 0x24
#define ROMPATCH_REV 0x40
#define IPU_CONF IPU_CTRL_BASE_ADDR
#define IPU_CONF_PXL_ENDIAN (1<<8)
#define IPU_CONF_DU_EN (1<<7)
#define IPU_CONF_DI_EN (1<<6)
#define IPU_CONF_ADC_EN (1<<5)
#define IPU_CONF_SDC_EN (1<<4)
#define IPU_CONF_PF_EN (1<<3)
#define IPU_CONF_ROT_EN (1<<2)
#define IPU_CONF_IC_EN (1<<1)
#define IPU_CONF_CSI_EN (1<<0)
/*
* CSPI register definitions
*/
#define MXC_CSPI
#define MXC_CSPICTRL_EN (1 << 0)
#define MXC_CSPICTRL_MODE (1 << 1)
#define MXC_CSPICTRL_XCH (1 << 2)
#define MXC_CSPICTRL_SMC (1 << 3)
#define MXC_CSPICTRL_POL (1 << 4)
#define MXC_CSPICTRL_PHA (1 << 5)
#define MXC_CSPICTRL_SSCTL (1 << 6)
#define MXC_CSPICTRL_SSPOL (1 << 7)
#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
#define MXC_CSPICTRL_TC (1 << 7)
#define MXC_CSPICTRL_RXOVF (1 << 6)
#define MXC_CSPICTRL_MAXBITS 0xfff
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
#define MAX_SPI_BYTES 4
#define MXC_SPI_BASE_ADDRESSES \
0x43fa4000, \
0x50010000,
#define GPIO_PORT_NUM 3
#define GPIO_NUM_PIN 32
#define CHIP_REV_1_0 0x10
#define CHIP_REV_2_0 0x20
#define BOARD_REV_1_0 0x0
#define BOARD_REV_2_0 0x1
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
/* Clock Control Module (CCM) registers */
struct ccm_regs {
u32 ccmr; /* Control */
u32 pdr0; /* Post divider 0 */
u32 pdr1; /* Post divider 1 */
u32 pdr2; /* Post divider 2 */
u32 pdr3; /* Post divider 3 */
u32 pdr4; /* Post divider 4 */
u32 rcsr; /* CCM Status */
u32 mpctl; /* Core PLL Control */
u32 ppctl; /* Peripheral PLL Control */
u32 acmr; /* Audio clock mux */
u32 cosr; /* Clock out source */
u32 cgr0; /* Clock Gating Control 0 */
u32 cgr1; /* Clock Gating Control 1 */
u32 cgr2; /* Clock Gating Control 2 */
u32 cgr3; /* Clock Gating Control 3 */
u32 reserved;
u32 dcvr0; /* DPTC Comparator 0 */
u32 dcvr1; /* DPTC Comparator 0 */
u32 dcvr2; /* DPTC Comparator 0 */
u32 dcvr3; /* DPTC Comparator 0 */
u32 ltr0; /* Load Tracking 0 */
u32 ltr1; /* Load Tracking 1 */
u32 ltr2; /* Load Tracking 2 */
u32 ltr3; /* Load Tracking 3 */
u32 ltbr0; /* Load Tracking Buffer 0 */
};
/* IIM control registers */
struct iim_regs {
u32 iim_stat;
u32 iim_statm;
u32 iim_err;
u32 iim_emask;
u32 iim_fctl;
u32 iim_ua;
u32 iim_la;
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
u32 res1[0x1f1];
struct fuse_bank {
u32 fuse_regs[0x20];
u32 fuse_rsvd[0xe0];
} bank[3];
};
struct fuse_bank0_regs {
u32 fuse0_7[8];
u32 uid[8];
u32 fuse16_31[0x10];
};
struct fuse_bank1_regs {
u32 fuse0_21[0x16];
u32 usr;
u32 fuse23_31[9];
};
/* General Purpose Timer (GPT) registers */
struct gpt_regs {
u32 ctrl; /* control */
u32 pre; /* prescaler */
u32 stat; /* status */
u32 intr; /* interrupt */
u32 cmp[3]; /* output compare 1-3 */
u32 capt[2]; /* input capture 1-2 */
u32 counter; /* counter */
};
/* CSPI registers */
struct cspi_regs {
u32 rxdata;
u32 txdata;
u32 ctrl;
u32 intr;
u32 dma;
u32 stat;
u32 period;
u32 test;
};
struct esdc_regs {
u32 esdctl0;
u32 esdcfg0;
u32 esdctl1;
u32 esdcfg1;
u32 esdmisc;
u32 reserved[4];
u32 esdcdly[5];
u32 esdcdlyl;
};
#define ESDC_MISC_RST (1 << 1)
#define ESDC_MISC_MDDR_EN (1 << 2)
#define ESDC_MISC_MDDR_DL_RST (1 << 3)
#define ESDC_MISC_DDR_EN (1 << 8)
#define ESDC_MISC_DDR2_EN (1 << 9)
/* Multi-Layer AHB Crossbar Switch (MAX) registers */
struct max_regs {
u32 mpr0;
u32 pad00[3];
u32 sgpcr0;
u32 pad01[59];
u32 mpr1;
u32 pad02[3];
u32 sgpcr1;
u32 pad03[59];
u32 mpr2;
u32 pad04[3];
u32 sgpcr2;
u32 pad05[59];
u32 mpr3;
u32 pad06[3];
u32 sgpcr3;
u32 pad07[59];
u32 mpr4;
u32 pad08[3];
u32 sgpcr4;
u32 pad09[251];
u32 mgpcr0;
u32 pad10[63];
u32 mgpcr1;
u32 pad11[63];
u32 mgpcr2;
u32 pad12[63];
u32 mgpcr3;
u32 pad13[63];
u32 mgpcr4;
u32 pad14[63];
u32 mgpcr5;
};
/* AHB <-> IP-Bus Interface (AIPS) */
struct aips_regs {
u32 mpr_0_7;
u32 mpr_8_15;
u32 pad0[6];
u32 pacr_0_7;
u32 pacr_8_15;
u32 pacr_16_23;
u32 pacr_24_31;
u32 pad1[4];
u32 opacr_0_7;
u32 opacr_8_15;
u32 opacr_16_23;
u32 opacr_24_31;
u32 opacr_32_39;
};
/*
* NFMS bit in RCSR register for pagesize of nandflash
*/
#define NFMS_BIT 8
#define NFMS_NF_DWIDTH 14
#define NFMS_NF_PG_SZ 8
#define CCM_RCSR_NF_16BIT_SEL (1 << 14)
#endif
/*
* Generic timer support
*/
#ifdef CONFIG_MX35_CLK32
#define CONFIG_SYS_TIMER_RATE CONFIG_MX35_CLK32
#else
#define CONFIG_SYS_TIMER_RATE 32768
#endif
#define CONFIG_SYS_TIMER_COUNTER (GPT1_BASE_ADDR+36)
#endif /* __ASM_ARCH_MX35_H */