366 lines
8.4 KiB
Plaintext
366 lines
8.4 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
//
|
||
|
|
// Copyright (C) 2019 Logic PD, Inc.
|
||
|
|
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
chosen {
|
||
|
|
stdout-path = &uart1;
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@10000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x10000000 0x80000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_wl18xx_vmmc: regulator-wl18xx {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vwl1837";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
startup-delay-us = <70000>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&clks {
|
||
|
|
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
||
|
|
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
||
|
|
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
||
|
|
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpmi {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||
|
|
nand-on-flash-bbt;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pfuze100: pmic@8 {
|
||
|
|
compatible = "fsl,pfuze100";
|
||
|
|
reg = <0x08>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
sw1a_reg: sw1ab {
|
||
|
|
regulator-min-microvolt = <725000>;
|
||
|
|
regulator-max-microvolt = <1450000>;
|
||
|
|
regulator-name = "vddcore";
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-ramp-delay = <6250>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw1c_reg: sw1c {
|
||
|
|
regulator-min-microvolt = <725000>;
|
||
|
|
regulator-max-microvolt = <1450000>;
|
||
|
|
regulator-name = "vddsoc";
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-ramp-delay = <6250>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw2_reg: sw2 {
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "gen_3v3";
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw3a_reg: sw3a {
|
||
|
|
regulator-min-microvolt = <1350000>;
|
||
|
|
regulator-max-microvolt = <1350000>;
|
||
|
|
regulator-name = "sw3a_vddr";
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw3b_reg: sw3b {
|
||
|
|
regulator-min-microvolt = <1350000>;
|
||
|
|
regulator-max-microvolt = <1350000>;
|
||
|
|
regulator-name = "sw3b_vddr";
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
sw4_reg: sw4 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "gen_rgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
swbst_reg: swbst {
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5150000>;
|
||
|
|
regulator-name = "gen_5v0";
|
||
|
|
};
|
||
|
|
|
||
|
|
snvs_reg: vsnvs {
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
regulator-name = "gen_vsns";
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vref_reg: vrefddr {
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vgen1_reg: vgen1 {
|
||
|
|
regulator-min-microvolt = <1500000>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
regulator-name = "gen_1v5";
|
||
|
|
};
|
||
|
|
|
||
|
|
vgen2_reg: vgen2 {
|
||
|
|
regulator-name = "vgen2";
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <1550000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vgen3_reg: vgen3 {
|
||
|
|
regulator-name = "gen_vadj_0";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vgen4_reg: vgen4 {
|
||
|
|
regulator-name = "gen_1v8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vgen5_reg: vgen5 {
|
||
|
|
regulator-name = "gen_vadj_1";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vgen6_reg: vgen6 {
|
||
|
|
regulator-name = "gen_2v5";
|
||
|
|
regulator-min-microvolt = <2500000>;
|
||
|
|
regulator-max-microvolt = <2500000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
coin_reg: coin {
|
||
|
|
regulator-min-microvolt = <2500000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
temperature-sensor@49 {
|
||
|
|
compatible = "ti,tmp102";
|
||
|
|
reg = <0x49>;
|
||
|
|
interrupt-parent = <&gpio6>;
|
||
|
|
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
#thermal-sensor-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
temperature-sensor@4a {
|
||
|
|
compatible = "ti,tmp102";
|
||
|
|
reg = <0x4a>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_tempsense>;
|
||
|
|
interrupt-parent = <&gpio6>;
|
||
|
|
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
#thermal-sensor-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom@51 {
|
||
|
|
compatible = "atmel,24c64";
|
||
|
|
pagesize = <32>;
|
||
|
|
read-only; /* Manufacturing EEPROM programmed at factory */
|
||
|
|
reg = <0x51>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom@52 {
|
||
|
|
compatible = "atmel,24c64";
|
||
|
|
pagesize = <32>;
|
||
|
|
reg = <0x52>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Reroute power feeding the CPU to come from the external PMIC */
|
||
|
|
®_arm
|
||
|
|
{
|
||
|
|
vin-supply = <&sw1a_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
®_soc
|
||
|
|
{
|
||
|
|
vin-supply = <&sw1c_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_hog>;
|
||
|
|
|
||
|
|
pinctrl_gpmi_nand: gpmi-nandgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
|
||
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
|
||
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
|
||
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
|
||
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_hog: hoggrp {
|
||
|
|
fsl,pins = < /* Enable ARM Debugger */
|
||
|
|
MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0
|
||
|
|
MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0
|
||
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c3: i2c3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_tempsense: tempsensegrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart1: uart1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart2: uart2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */
|
||
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
|
||
|
|
MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
|
||
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9
|
||
|
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9
|
||
|
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9
|
||
|
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9
|
||
|
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9
|
||
|
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049
|
||
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049
|
||
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
|
||
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
|
||
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
|
||
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
|
||
|
|
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */
|
||
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&snvs_poweroff {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
|
uart-has-rtscts;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
bluetooth {
|
||
|
|
compatible = "ti,wl1837-st";
|
||
|
|
enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc1 {
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
|
non-removable;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
wakeup-source;
|
||
|
|
vmmc-supply = <&sw2_reg>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
||
|
|
non-removable;
|
||
|
|
cap-power-off-card;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
wakeup-source;
|
||
|
|
vmmc-supply = <®_wl18xx_vmmc>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
wlcore: wlcore@2 {
|
||
|
|
compatible = "ti,wl1837";
|
||
|
|
reg = <2>;
|
||
|
|
interrupt-parent = <&gpio7>;
|
||
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
tcxo-clock-frequency = <26000000>;
|
||
|
|
};
|
||
|
|
};
|