uboot/u-boot-stm32mp-2020.01/arch/arm/dts/exynos7420.dtsi

83 lines
2.1 KiB
Plaintext
Raw Permalink Normal View History

2024-01-10 06:52:34 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Samsung Exynos7420 SoC device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
#include "skeleton.dtsi"
#include <dt-bindings/clock/exynos7420-clk.h>
/ {
compatible = "samsung,exynos7420";
fin_pll: xxti {
compatible = "fixed-clock";
clock-output-names = "fin_pll";
u-boot,dm-pre-reloc;
#clock-cells = <0>;
};
clock_topc: clock-controller@10570000 {
compatible = "samsung,exynos7-clock-topc";
reg = <0x10570000 0x10000>;
u-boot,dm-pre-reloc;
#clock-cells = <1>;
clocks = <&fin_pll>;
clock-names = "fin_pll";
};
clock_top0: clock-controller@105d0000 {
compatible = "samsung,exynos7-clock-top0";
reg = <0x105d0000 0xb000>;
u-boot,dm-pre-reloc;
#clock-cells = <1>;
clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
<&clock_topc DOUT_SCLK_BUS1_PLL>,
<&clock_topc DOUT_SCLK_CC_PLL>,
<&clock_topc DOUT_SCLK_MFC_PLL>;
clock-names = "fin_pll", "dout_sclk_bus0_pll",
"dout_sclk_bus1_pll", "dout_sclk_cc_pll",
"dout_sclk_mfc_pll";
};
clock_peric1: clock-controller@14c80000 {
compatible = "samsung,exynos7-clock-peric1";
reg = <0x14c80000 0xd00>;
u-boot,dm-pre-reloc;
#clock-cells = <1>;
clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
<&clock_top0 CLK_SCLK_UART1>,
<&clock_top0 CLK_SCLK_UART2>,
<&clock_top0 CLK_SCLK_UART3>;
clock-names = "fin_pll", "dout_aclk_peric1_66",
"sclk_uart1", "sclk_uart2", "sclk_uart3";
};
pinctrl@13470000 {
compatible = "samsung,exynos7420-pinctrl";
reg = <0x13470000 0x1000>;
u-boot,dm-pre-reloc;
serial2_bus: serial2-bus {
samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
u-boot,dm-pre-reloc;
};
};
serial@14C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14C30000 0x100>;
u-boot,dm-pre-reloc;
clocks = <&clock_peric1 PCLK_UART2>,
<&clock_peric1 SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&serial2_bus>;
};
};