tf-a/tf-a-stm32mp-2.2.r1/plat/qemu/common/qemu_pm.c

228 lines
7.3 KiB
C

/*
* Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <lib/psci/psci.h>
#include <plat/common/platform.h>
#include "qemu_private.h"
/*
* The secure entry point to be used on warm reset.
*/
static unsigned long secure_entrypoint;
/* Make composite power state parameter till power level 0 */
#if PSCI_EXTENDED_STATE_ID
#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
(((lvl0_state) << PSTATE_ID_SHIFT) | \
((type) << PSTATE_TYPE_SHIFT))
#else
#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
(((lvl0_state) << PSTATE_ID_SHIFT) | \
((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
((type) << PSTATE_TYPE_SHIFT))
#endif /* PSCI_EXTENDED_STATE_ID */
#define qemu_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
(((lvl1_state) << PLAT_LOCAL_PSTATE_WIDTH) | \
qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
/*
* The table storing the valid idle power states. Ensure that the
* array entries are populated in ascending order of state-id to
* enable us to use binary search during power state validation.
* The table must be terminated by a NULL entry.
*/
static const unsigned int qemu_pm_idle_states[] = {
/* State-id - 0x01 */
qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_RET,
MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
/* State-id - 0x02 */
qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_OFF,
MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
/* State-id - 0x22 */
qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_OFF, PLAT_LOCAL_STATE_OFF,
MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
0,
};
/*******************************************************************************
* Platform handler called to check the validity of the power state
* parameter. The power state parameter has to be a composite power state.
******************************************************************************/
static int qemu_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
unsigned int state_id;
int i;
assert(req_state);
/*
* Currently we are using a linear search for finding the matching
* entry in the idle power state array. This can be made a binary
* search if the number of entries justify the additional complexity.
*/
for (i = 0; !!qemu_pm_idle_states[i]; i++) {
if (power_state == qemu_pm_idle_states[i])
break;
}
/* Return error if entry not found in the idle state array */
if (!qemu_pm_idle_states[i])
return PSCI_E_INVALID_PARAMS;
i = 0;
state_id = psci_get_pstate_id(power_state);
/* Parse the State ID and populate the state info parameter */
while (state_id) {
req_state->pwr_domain_state[i++] = state_id &
PLAT_LOCAL_PSTATE_MASK;
state_id >>= PLAT_LOCAL_PSTATE_WIDTH;
}
return PSCI_E_SUCCESS;
}
/*******************************************************************************
* Platform handler called to check the validity of the non secure
* entrypoint.
******************************************************************************/
static int qemu_validate_ns_entrypoint(uintptr_t entrypoint)
{
/*
* Check if the non secure entrypoint lies within the non
* secure DRAM.
*/
if ((entrypoint >= NS_DRAM0_BASE) &&
(entrypoint < (NS_DRAM0_BASE + NS_DRAM0_SIZE)))
return PSCI_E_SUCCESS;
return PSCI_E_INVALID_ADDRESS;
}
/*******************************************************************************
* Platform handler called when a CPU is about to enter standby.
******************************************************************************/
static void qemu_cpu_standby(plat_local_state_t cpu_state)
{
assert(cpu_state == PLAT_LOCAL_STATE_RET);
/*
* Enter standby state
* dsb is good practice before using wfi to enter low power states
*/
dsb();
wfi();
}
/*******************************************************************************
* Platform handler called when a power domain is about to be turned on. The
* mpidr determines the CPU to be turned on.
******************************************************************************/
static int qemu_pwr_domain_on(u_register_t mpidr)
{
int rc = PSCI_E_SUCCESS;
unsigned pos = plat_core_pos_by_mpidr(mpidr);
uint64_t *hold_base = (uint64_t *)PLAT_QEMU_HOLD_BASE;
hold_base[pos] = PLAT_QEMU_HOLD_STATE_GO;
sev();
return rc;
}
/*******************************************************************************
* Platform handler called when a power domain is about to be turned off. The
* target_state encodes the power state that each level should transition to.
******************************************************************************/
void qemu_pwr_domain_off(const psci_power_state_t *target_state)
{
assert(0);
}
/*******************************************************************************
* Platform handler called when a power domain is about to be suspended. The
* target_state encodes the power state that each level should transition to.
******************************************************************************/
void qemu_pwr_domain_suspend(const psci_power_state_t *target_state)
{
assert(0);
}
/*******************************************************************************
* Platform handler called when a power domain has just been powered on after
* being turned off earlier. The target_state encodes the low power state that
* each level has woken up from.
******************************************************************************/
void qemu_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
PLAT_LOCAL_STATE_OFF);
qemu_pwr_gic_on_finish();
}
/*******************************************************************************
* Platform handler called when a power domain has just been powered on after
* having been suspended earlier. The target_state encodes the low power state
* that each level has woken up from.
******************************************************************************/
void qemu_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
{
assert(0);
}
/*******************************************************************************
* Platform handlers to shutdown/reboot the system
******************************************************************************/
static void __dead2 qemu_system_off(void)
{
ERROR("QEMU System Off: operation not handled.\n");
panic();
}
static void __dead2 qemu_system_reset(void)
{
ERROR("QEMU System Reset: operation not handled.\n");
panic();
}
static const plat_psci_ops_t plat_qemu_psci_pm_ops = {
.cpu_standby = qemu_cpu_standby,
.pwr_domain_on = qemu_pwr_domain_on,
.pwr_domain_off = qemu_pwr_domain_off,
.pwr_domain_suspend = qemu_pwr_domain_suspend,
.pwr_domain_on_finish = qemu_pwr_domain_on_finish,
.pwr_domain_suspend_finish = qemu_pwr_domain_suspend_finish,
.system_off = qemu_system_off,
.system_reset = qemu_system_reset,
.validate_power_state = qemu_validate_power_state,
.validate_ns_entrypoint = qemu_validate_ns_entrypoint
};
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
const plat_psci_ops_t **psci_ops)
{
uintptr_t *mailbox = (void *) PLAT_QEMU_TRUSTED_MAILBOX_BASE;
*mailbox = sec_entrypoint;
secure_entrypoint = (unsigned long) sec_entrypoint;
*psci_ops = &plat_qemu_psci_pm_ops;
return 0;
}