tf-a/tf-a-stm32mp-2.2.r1/plat/layerscape/common/ls_tzc380.c

78 lines
1.9 KiB
C

/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <endian.h>
#include <platform_def.h>
#include <common/debug.h>
#include <lib/mmio.h>
#include "soc_tzasc.h"
int tzc380_set_region(unsigned int tzasc_base, unsigned int region_id,
unsigned int enabled, unsigned int low_addr,
unsigned int high_addr, unsigned int size,
unsigned int security, unsigned int subreg_disable_mask)
{
unsigned int reg;
unsigned int reg_base;
unsigned int attr_value;
reg_base = (tzasc_base + TZASC_REGIONS_REG + (region_id << 4));
if (region_id == 0) {
reg = (reg_base + TZASC_REGION_ATTR_OFFSET);
mmio_write_32((uintptr_t)reg, ((security & 0xF) << 28));
} else {
reg = reg_base + TZASC_REGION_LOWADDR_OFFSET;
mmio_write_32((uintptr_t)reg,
(low_addr & TZASC_REGION_LOWADDR_MASK));
reg = reg_base + TZASC_REGION_HIGHADDR_OFFSET;
mmio_write_32((uintptr_t)reg, high_addr);
reg = reg_base + TZASC_REGION_ATTR_OFFSET;
attr_value = ((security & 0xF) << 28) |
((subreg_disable_mask & 0xFF) << 8) |
((size & 0x3F) << 1) | (enabled & 0x1);
mmio_write_32((uintptr_t)reg, attr_value);
}
return 0;
}
int tzc380_setup(void)
{
int reg_id = 0;
INFO("Configuring TZASC-380\n");
/*
* Configure CCI control override register to terminate all barrier
* transactions
*/
mmio_write_32(PLAT_LS1043_CCI_BASE, CCI_TERMINATE_BARRIER_TX);
/* Configure CSU secure access register to disable TZASC bypass mux */
mmio_write_32((uintptr_t)(CONFIG_SYS_FSL_CSU_ADDR +
CSU_SEC_ACCESS_REG_OFFSET),
bswap32(TZASC_BYPASS_MUX_DISABLE));
for (reg_id = 0; reg_id < MAX_NUM_TZC_REGION; reg_id++) {
tzc380_set_region(CONFIG_SYS_FSL_TZASC_ADDR,
reg_id,
tzc380_reg_list[reg_id].enabled,
tzc380_reg_list[reg_id].low_addr,
tzc380_reg_list[reg_id].high_addr,
tzc380_reg_list[reg_id].size,
tzc380_reg_list[reg_id].secure,
tzc380_reg_list[reg_id].sub_mask);
}
return 0;
}