411 lines
15 KiB
ArmAsm
411 lines
15 KiB
ArmAsm
/*
|
|
* Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef EL3_COMMON_MACROS_S
|
|
#define EL3_COMMON_MACROS_S
|
|
|
|
#include <arch.h>
|
|
#include <asm_macros.S>
|
|
|
|
/*
|
|
* Helper macro to initialise EL3 registers we care about.
|
|
*/
|
|
.macro el3_arch_init_common
|
|
/* ---------------------------------------------------------------------
|
|
* SCTLR_EL3 has already been initialised - read current value before
|
|
* modifying.
|
|
*
|
|
* SCTLR_EL3.I: Enable the instruction cache.
|
|
*
|
|
* SCTLR_EL3.SA: Enable Stack Alignment check. A SP alignment fault
|
|
* exception is generated if a load or store instruction executed at
|
|
* EL3 uses the SP as the base address and the SP is not aligned to a
|
|
* 16-byte boundary.
|
|
*
|
|
* SCTLR_EL3.A: Enable Alignment fault checking. All instructions that
|
|
* load or store one or more registers have an alignment check that the
|
|
* address being accessed is aligned to the size of the data element(s)
|
|
* being accessed.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
|
|
mrs x0, sctlr_el3
|
|
orr x0, x0, x1
|
|
msr sctlr_el3, x0
|
|
isb
|
|
|
|
#ifdef IMAGE_BL31
|
|
/* ---------------------------------------------------------------------
|
|
* Initialise the per-cpu cache pointer to the CPU.
|
|
* This is done early to enable crash reporting to have access to crash
|
|
* stack. Since crash reporting depends on cpu_data to report the
|
|
* unhandled exception, not doing so can lead to recursive exceptions
|
|
* due to a NULL TPIDR_EL3.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
bl init_cpu_data_ptr
|
|
#endif /* IMAGE_BL31 */
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Initialise SCR_EL3, setting all fields rather than relying on hw.
|
|
* All fields are architecturally UNKNOWN on reset. The following fields
|
|
* do not change during the TF lifetime. The remaining fields are set to
|
|
* zero here but are updated ahead of transitioning to a lower EL in the
|
|
* function cm_init_context_common().
|
|
*
|
|
* SCR_EL3.TWE: Set to zero so that execution of WFE instructions at
|
|
* EL2, EL1 and EL0 are not trapped to EL3.
|
|
*
|
|
* SCR_EL3.TWI: Set to zero so that execution of WFI instructions at
|
|
* EL2, EL1 and EL0 are not trapped to EL3.
|
|
*
|
|
* SCR_EL3.SIF: Set to one to disable instruction fetches from
|
|
* Non-secure memory.
|
|
*
|
|
* SCR_EL3.SMD: Set to zero to enable SMC calls at EL1 and above, from
|
|
* both Security states and both Execution states.
|
|
*
|
|
* SCR_EL3.EA: Set to one to route External Aborts and SError Interrupts
|
|
* to EL3 when executing at any EL.
|
|
*
|
|
* SCR_EL3.{API,APK}: For Armv8.3 pointer authentication feature,
|
|
* disable traps to EL3 when accessing key registers or using pointer
|
|
* authentication instructions from lower ELs.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
mov_imm x0, ((SCR_RESET_VAL | SCR_EA_BIT | SCR_SIF_BIT) \
|
|
& ~(SCR_TWE_BIT | SCR_TWI_BIT | SCR_SMD_BIT))
|
|
#if CTX_INCLUDE_PAUTH_REGS
|
|
/*
|
|
* If the pointer authentication registers are saved during world
|
|
* switches, enable pointer authentication everywhere, as it is safe to
|
|
* do so.
|
|
*/
|
|
orr x0, x0, #(SCR_API_BIT | SCR_APK_BIT)
|
|
#endif
|
|
msr scr_el3, x0
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Initialise MDCR_EL3, setting all fields rather than relying on hw.
|
|
* Some fields are architecturally UNKNOWN on reset.
|
|
*
|
|
* MDCR_EL3.SDD: Set to one to disable AArch64 Secure self-hosted debug.
|
|
* Debug exceptions, other than Breakpoint Instruction exceptions, are
|
|
* disabled from all ELs in Secure state.
|
|
*
|
|
* MDCR_EL3.SPD32: Set to 0b10 to disable AArch32 Secure self-hosted
|
|
* privileged debug from S-EL1.
|
|
*
|
|
* MDCR_EL3.TDOSA: Set to zero so that EL2 and EL2 System register
|
|
* access to the powerdown debug registers do not trap to EL3.
|
|
*
|
|
* MDCR_EL3.TDA: Set to zero to allow EL0, EL1 and EL2 access to the
|
|
* debug registers, other than those registers that are controlled by
|
|
* MDCR_EL3.TDOSA.
|
|
*
|
|
* MDCR_EL3.TPM: Set to zero so that EL0, EL1, and EL2 System register
|
|
* accesses to all Performance Monitors registers do not trap to EL3.
|
|
*
|
|
* MDCR_EL3.SCCD: Set to one so that cycle counting by PMCCNTR_EL0 is
|
|
* prohibited in Secure state. This bit is RES0 in versions of the
|
|
* architecture earlier than ARMv8.5, setting it to 1 doesn't have any
|
|
* effect on them.
|
|
*
|
|
* MDCR_EL3.SPME: Set to zero so that event counting by the programmable
|
|
* counters PMEVCNTR<n>_EL0 is prohibited in Secure state. If ARMv8.2
|
|
* Debug is not implemented this bit does not have any effect on the
|
|
* counters unless there is support for the implementation defined
|
|
* authentication interface ExternalSecureNoninvasiveDebugEnabled().
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
mov_imm x0, ((MDCR_EL3_RESET_VAL | MDCR_SDD_BIT | \
|
|
MDCR_SPD32(MDCR_SPD32_DISABLE) | MDCR_SCCD_BIT) & \
|
|
~(MDCR_SPME_BIT | MDCR_TDOSA_BIT | MDCR_TDA_BIT | \
|
|
MDCR_TPM_BIT))
|
|
|
|
msr mdcr_el3, x0
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Initialise PMCR_EL0 setting all fields rather than relying
|
|
* on hw. Some fields are architecturally UNKNOWN on reset.
|
|
*
|
|
* PMCR_EL0.LP: Set to one so that event counter overflow, that
|
|
* is recorded in PMOVSCLR_EL0[0-30], occurs on the increment
|
|
* that changes PMEVCNTR<n>_EL0[63] from 1 to 0, when ARMv8.5-PMU
|
|
* is implemented. This bit is RES0 in versions of the architecture
|
|
* earlier than ARMv8.5, setting it to 1 doesn't have any effect
|
|
* on them.
|
|
*
|
|
* PMCR_EL0.LC: Set to one so that cycle counter overflow, that
|
|
* is recorded in PMOVSCLR_EL0[31], occurs on the increment
|
|
* that changes PMCCNTR_EL0[63] from 1 to 0.
|
|
*
|
|
* PMCR_EL0.DP: Set to one so that the cycle counter,
|
|
* PMCCNTR_EL0 does not count when event counting is prohibited.
|
|
*
|
|
* PMCR_EL0.X: Set to zero to disable export of events.
|
|
*
|
|
* PMCR_EL0.D: Set to zero so that, when enabled, PMCCNTR_EL0
|
|
* counts on every clock cycle.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
mov_imm x0, ((PMCR_EL0_RESET_VAL | PMCR_EL0_LP_BIT | \
|
|
PMCR_EL0_LC_BIT | PMCR_EL0_DP_BIT) & \
|
|
~(PMCR_EL0_X_BIT | PMCR_EL0_D_BIT))
|
|
|
|
msr pmcr_el0, x0
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Enable External Aborts and SError Interrupts now that the exception
|
|
* vectors have been setup.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
msr daifclr, #DAIF_ABT_BIT
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Initialise CPTR_EL3, setting all fields rather than relying on hw.
|
|
* All fields are architecturally UNKNOWN on reset.
|
|
*
|
|
* CPTR_EL3.TCPAC: Set to zero so that any accesses to CPACR_EL1,
|
|
* CPTR_EL2, CPACR, or HCPTR do not trap to EL3.
|
|
*
|
|
* CPTR_EL3.TTA: Set to zero so that System register accesses to the
|
|
* trace registers do not trap to EL3.
|
|
*
|
|
* CPTR_EL3.TFP: Set to zero so that accesses to the V- or Z- registers
|
|
* by Advanced SIMD, floating-point or SVE instructions (if implemented)
|
|
* do not trap to EL3.
|
|
*/
|
|
mov_imm x0, (CPTR_EL3_RESET_VAL & ~(TCPAC_BIT | TTA_BIT | TFP_BIT))
|
|
msr cptr_el3, x0
|
|
|
|
/*
|
|
* If Data Independent Timing (DIT) functionality is implemented,
|
|
* always enable DIT in EL3
|
|
*/
|
|
mrs x0, id_aa64pfr0_el1
|
|
ubfx x0, x0, #ID_AA64PFR0_DIT_SHIFT, #ID_AA64PFR0_DIT_LENGTH
|
|
cmp x0, #ID_AA64PFR0_DIT_SUPPORTED
|
|
bne 1f
|
|
mov x0, #DIT_BIT
|
|
msr DIT, x0
|
|
1:
|
|
.endm
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* This is the super set of actions that need to be performed during a cold boot
|
|
* or a warm boot in EL3. This code is shared by BL1 and BL31.
|
|
*
|
|
* This macro will always perform reset handling, architectural initialisations
|
|
* and stack setup. The rest of the actions are optional because they might not
|
|
* be needed, depending on the context in which this macro is called. This is
|
|
* why this macro is parameterised ; each parameter allows to enable/disable
|
|
* some actions.
|
|
*
|
|
* _init_sctlr:
|
|
* Whether the macro needs to initialise SCTLR_EL3, including configuring
|
|
* the endianness of data accesses.
|
|
*
|
|
* _warm_boot_mailbox:
|
|
* Whether the macro needs to detect the type of boot (cold/warm). The
|
|
* detection is based on the platform entrypoint address : if it is zero
|
|
* then it is a cold boot, otherwise it is a warm boot. In the latter case,
|
|
* this macro jumps on the platform entrypoint address.
|
|
*
|
|
* _secondary_cold_boot:
|
|
* Whether the macro needs to identify the CPU that is calling it: primary
|
|
* CPU or secondary CPU. The primary CPU will be allowed to carry on with
|
|
* the platform initialisations, while the secondaries will be put in a
|
|
* platform-specific state in the meantime.
|
|
*
|
|
* If the caller knows this macro will only be called by the primary CPU
|
|
* then this parameter can be defined to 0 to skip this step.
|
|
*
|
|
* _init_memory:
|
|
* Whether the macro needs to initialise the memory.
|
|
*
|
|
* _init_c_runtime:
|
|
* Whether the macro needs to initialise the C runtime environment.
|
|
*
|
|
* _exception_vectors:
|
|
* Address of the exception vectors to program in the VBAR_EL3 register.
|
|
* -----------------------------------------------------------------------------
|
|
*/
|
|
.macro el3_entrypoint_common \
|
|
_init_sctlr, _warm_boot_mailbox, _secondary_cold_boot, \
|
|
_init_memory, _init_c_runtime, _exception_vectors
|
|
|
|
.if \_init_sctlr
|
|
/* -------------------------------------------------------------
|
|
* This is the initialisation of SCTLR_EL3 and so must ensure
|
|
* that all fields are explicitly set rather than relying on hw.
|
|
* Some fields reset to an IMPLEMENTATION DEFINED value and
|
|
* others are architecturally UNKNOWN on reset.
|
|
*
|
|
* SCTLR.EE: Set the CPU endianness before doing anything that
|
|
* might involve memory reads or writes. Set to zero to select
|
|
* Little Endian.
|
|
*
|
|
* SCTLR_EL3.WXN: For the EL3 translation regime, this field can
|
|
* force all memory regions that are writeable to be treated as
|
|
* XN (Execute-never). Set to zero so that this control has no
|
|
* effect on memory access permissions.
|
|
*
|
|
* SCTLR_EL3.SA: Set to zero to disable Stack Alignment check.
|
|
*
|
|
* SCTLR_EL3.A: Set to zero to disable Alignment fault checking.
|
|
*
|
|
* SCTLR.DSSBS: Set to zero to disable speculation store bypass
|
|
* safe behaviour upon exception entry to EL3.
|
|
* -------------------------------------------------------------
|
|
*/
|
|
mov_imm x0, (SCTLR_RESET_VAL & ~(SCTLR_EE_BIT | SCTLR_WXN_BIT \
|
|
| SCTLR_SA_BIT | SCTLR_A_BIT | SCTLR_DSSBS_BIT))
|
|
msr sctlr_el3, x0
|
|
isb
|
|
.endif /* _init_sctlr */
|
|
|
|
.if \_warm_boot_mailbox
|
|
/* -------------------------------------------------------------
|
|
* This code will be executed for both warm and cold resets.
|
|
* Now is the time to distinguish between the two.
|
|
* Query the platform entrypoint address and if it is not zero
|
|
* then it means it is a warm boot so jump to this address.
|
|
* -------------------------------------------------------------
|
|
*/
|
|
bl plat_get_my_entrypoint
|
|
cbz x0, do_cold_boot
|
|
br x0
|
|
|
|
do_cold_boot:
|
|
.endif /* _warm_boot_mailbox */
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Set the exception vectors.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
adr x0, \_exception_vectors
|
|
msr vbar_el3, x0
|
|
isb
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* It is a cold boot.
|
|
* Perform any processor specific actions upon reset e.g. cache, TLB
|
|
* invalidations etc.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
bl reset_handler
|
|
|
|
el3_arch_init_common
|
|
|
|
.if \_secondary_cold_boot
|
|
/* -------------------------------------------------------------
|
|
* Check if this is a primary or secondary CPU cold boot.
|
|
* The primary CPU will set up the platform while the
|
|
* secondaries are placed in a platform-specific state until the
|
|
* primary CPU performs the necessary actions to bring them out
|
|
* of that state and allows entry into the OS.
|
|
* -------------------------------------------------------------
|
|
*/
|
|
bl plat_is_my_cpu_primary
|
|
cbnz w0, do_primary_cold_boot
|
|
|
|
/* This is a cold boot on a secondary CPU */
|
|
bl plat_secondary_cold_boot_setup
|
|
/* plat_secondary_cold_boot_setup() is not supposed to return */
|
|
bl el3_panic
|
|
|
|
do_primary_cold_boot:
|
|
.endif /* _secondary_cold_boot */
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Initialize memory now. Secondary CPU initialization won't get to this
|
|
* point.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
|
|
.if \_init_memory
|
|
bl platform_mem_init
|
|
.endif /* _init_memory */
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Init C runtime environment:
|
|
* - Zero-initialise the NOBITS sections. There are 2 of them:
|
|
* - the .bss section;
|
|
* - the coherent memory section (if any).
|
|
* - Relocate the data section from ROM to RAM, if required.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
.if \_init_c_runtime
|
|
#if defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_INV_DCACHE)
|
|
/* -------------------------------------------------------------
|
|
* Invalidate the RW memory used by the BL31 image. This
|
|
* includes the data and NOBITS sections. This is done to
|
|
* safeguard against possible corruption of this memory by
|
|
* dirty cache lines in a system cache as a result of use by
|
|
* an earlier boot loader stage.
|
|
* -------------------------------------------------------------
|
|
*/
|
|
adrp x0, __RW_START__
|
|
add x0, x0, :lo12:__RW_START__
|
|
adrp x1, __RW_END__
|
|
add x1, x1, :lo12:__RW_END__
|
|
sub x1, x1, x0
|
|
bl inv_dcache_range
|
|
#endif
|
|
adrp x0, __BSS_START__
|
|
add x0, x0, :lo12:__BSS_START__
|
|
|
|
adrp x1, __BSS_END__
|
|
add x1, x1, :lo12:__BSS_END__
|
|
sub x1, x1, x0
|
|
bl zeromem
|
|
|
|
#if USE_COHERENT_MEM
|
|
adrp x0, __COHERENT_RAM_START__
|
|
add x0, x0, :lo12:__COHERENT_RAM_START__
|
|
adrp x1, __COHERENT_RAM_END_UNALIGNED__
|
|
add x1, x1, :lo12: __COHERENT_RAM_END_UNALIGNED__
|
|
sub x1, x1, x0
|
|
bl zeromem
|
|
#endif
|
|
|
|
#if defined(IMAGE_BL1) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_IN_XIP_MEM)
|
|
adrp x0, __DATA_RAM_START__
|
|
add x0, x0, :lo12:__DATA_RAM_START__
|
|
adrp x1, __DATA_ROM_START__
|
|
add x1, x1, :lo12:__DATA_ROM_START__
|
|
adrp x2, __DATA_RAM_END__
|
|
add x2, x2, :lo12:__DATA_RAM_END__
|
|
sub x2, x2, x0
|
|
bl memcpy16
|
|
#endif
|
|
.endif /* _init_c_runtime */
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Use SP_EL0 for the C runtime stack.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
msr spsel, #0
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Allocate a stack whose memory will be marked as Normal-IS-WBWA when
|
|
* the MMU is enabled. There is no risk of reading stale stack memory
|
|
* after enabling the MMU as only the primary CPU is running at the
|
|
* moment.
|
|
* ---------------------------------------------------------------------
|
|
*/
|
|
bl plat_set_my_stack
|
|
|
|
#if STACK_PROTECTOR_ENABLED
|
|
.if \_init_c_runtime
|
|
bl update_stack_protector_canary
|
|
.endif /* _init_c_runtime */
|
|
#endif
|
|
.endm
|
|
|
|
#endif /* EL3_COMMON_MACROS_S */
|