118 lines
4.5 KiB
Plaintext
118 lines
4.5 KiB
Plaintext
Compilation of TF-A (Trusted Firmware-A):
|
||
1. Pre-requisite
|
||
2. Initialise cross-compilation via SDK
|
||
3. Prepare tf-a source code
|
||
4. Management of tf-a source code
|
||
5. Compile tf-a source code
|
||
6. Update software on board
|
||
|
||
1. Pre-requisite:
|
||
-----------------
|
||
OpenSTLinux SDK must be installed.
|
||
|
||
For tf-a build you need to install:
|
||
- git:
|
||
Ubuntu: sudo apt-get install git-core gitk
|
||
Fedora: sudo yum install git
|
||
|
||
If you have never configured you git configuration:
|
||
$ git config --global user.name "your_name"
|
||
$ git config --global user.email "your_email@example.com"
|
||
|
||
2. Initialise cross-compilation via SDK:
|
||
---------------------------------------
|
||
Source SDK environment:
|
||
$ source <path to SDK>/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi
|
||
|
||
To verify if your cross-compilation environment have put in place:
|
||
$ set | grep CROSS
|
||
CROSS_COMPILE=arm-ostl-linux-gnueabi-
|
||
|
||
Warning: the environment are valid only on the shell session where you have
|
||
sourced the sdk environment.
|
||
|
||
3. Prepare tf-a source:
|
||
------------------------
|
||
If you have the tarball and the list of patch then you must extract the tarball
|
||
and apply the patch.
|
||
$> tar xfz tf-a-stm32mp-2.2.r1-r0.tar.gz
|
||
A new directory containing tf-a standard source code will be created, go into it:
|
||
$> cd tf-a-stm32mp-2.2.r1
|
||
|
||
NB: if there is no git management on source code and you would like to have a
|
||
git management on the code see section 4 [Management of tf-a source code]
|
||
if there is some patch, please apply it on source code
|
||
$> for p in `ls -1 ../*.patch`; do patch -p1 < $p; done
|
||
|
||
4. Management of tf-a source code:
|
||
-----------------------------------
|
||
If you like to have a better management of change made on tf-a source, you
|
||
can use git:
|
||
$ cd <directory to tf-a source code>
|
||
$ test -d .git || git init . && git add . && git commit -m "tf-a source code" && git gc
|
||
$ git checkout -b WORKING
|
||
$ for p in `ls -1 <path to patch>/*.patch`; do git am $p; done
|
||
|
||
NB: you can use directly the source from the community:
|
||
URL: git://github.com/ARM-software/arm-trusted-firmware.git
|
||
Branch: 1
|
||
Revision: a04808c16cfc126d9fe572ae7c4b5a3d39de5796
|
||
|
||
$ git clone git://github.com/ARM-software/arm-trusted-firmware.git -b 1
|
||
$ cd <directory to tf-a source code>
|
||
$ git checkout -b WORKING a04808c16cfc126d9fe572ae7c4b5a3d39de5796
|
||
$ for p in `ls -1 <path to patch>/*.patch`; do git am $p; done
|
||
|
||
5. Build tf-a source code:
|
||
--------------------------------
|
||
To compile tf-a source code
|
||
$> make -f $PWD/../Makefile.sdk all
|
||
or for a specific config :
|
||
$ make -f $PWD/../Makefile.sdk TFA_DEVICETREE=stm32mp157c-ev1 TF_A_CONFIG=trusted ELF_DEBUG_ENABLE='1' all
|
||
|
||
NB: TFA_DEVICETREE flag must be set to switch to correct board configuration.
|
||
|
||
Files generated should be as follow:
|
||
#> ../build/*/tf-a-*.stm32
|
||
|
||
6. Update software on board:
|
||
----------------------------
|
||
6.1. partitioning of binaries:
|
||
-----------------------------
|
||
TF-A build provide a binary named "tf-a-*.stm32" which MUST be copied on a
|
||
dedicated partition named "fsbl1"
|
||
|
||
6.2. Update via SDCARD:
|
||
-----------------------
|
||
Copy the binary (tf-a-*.stm32) on the dedicated partition, on SDCARD/USB disk
|
||
the partition "fsbl1" are the partition 1:
|
||
- SDCARD: /dev/mmcblkXp1 (where X is the instance number)
|
||
- SDCARD via USB reader: /dev/sdX1 (where X is the instance number)
|
||
$ dd if=<tf-a binary> of=/dev/<device partition> bs=1M conv=fdatasync
|
||
|
||
FAQ: to found the partition associated to a specific label, just plug the
|
||
SDCARD/USB disk on your PC and call the following command:
|
||
$ ls -l /dev/disk/by-partlabel/
|
||
total 0
|
||
lrwxrwxrwx 1 root root 10 Jan 17 17:38 bootfs -> ../../mmcblk0p4
|
||
lrwxrwxrwx 1 root root 10 Jan 17 17:38 fsbl1 -> ../../mmcblk0p1 ➔ FSBL (TF-A)
|
||
lrwxrwxrwx 1 root root 10 Jan 17 17:38 fsbl2 -> ../../mmcblk0p2 ➔ FSBL backup (TF-A backup – same content as FSBL)
|
||
lrwxrwxrwx 1 root root 10 Jan 17 17:38 rootfs -> ../../mmcblk0p5
|
||
lrwxrwxrwx 1 root root 10 Jan 17 17:38 ssbl -> ../../mmcblk0p3 ➔ SSBL (U-Boot)
|
||
lrwxrwxrwx 1 root root 10 Jan 17 17:38 userfs -> ../../mmcblk0p6
|
||
|
||
6.3. Update via USB mass storage on U-boot:
|
||
-------------------------------------------
|
||
* Plug the SDCARD on Board.
|
||
* Start the board and stop on U-boot shell:
|
||
Hit any key to stop autoboot: 0
|
||
STM32MP>
|
||
* plug an USB cable between the PC and the board via USB OTG port.
|
||
* On U-Boot shell, call the usb mass storage functionnality:
|
||
STM32MP> ums 0 mmc 0
|
||
ums <USB controller> <dev type: mmc|usb> <dev[:part]>
|
||
ex.:
|
||
For SDCARD: ums 0 mmc 0
|
||
For USB disk: ums 0 usb 0
|
||
|
||
* Follow section 6.2 to put tf-a-*.stm32 on SDCARD/USB disk |