tf-a/tf-a-stm32mp-2.2.r1/plat/intel/soc/agilex/include/agilex_mailbox.h

128 lines
3.8 KiB
C

/*
* Copyright (c) 2019, Intel Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef AGX_MBOX_H
#define AGX_MBOX_H
#include <lib/utils_def.h>
#define MBOX_OFFSET 0xffa30000
#define MBOX_ATF_CLIENT_ID 0x1
#define MBOX_JOB_ID 0x1
/* Mailbox interrupt flags and masks */
#define MBOX_INT_FLAG_COE 0x1
#define MBOX_INT_FLAG_RIE 0x2
#define MBOX_INT_FLAG_UAE 0x100
#define MBOX_COE_BIT(INTERRUPT) ((INTERRUPT) & 0x3)
#define MBOX_UAE_BIT(INTERRUPT) (((INTERRUPT) & (1<<8)))
/* Mailbox response and status */
#define MBOX_RESP_BUFFER_SIZE 16
#define MBOX_RESP_ERR(BUFFER) ((BUFFER) & 0x00000fff)
#define MBOX_RESP_LEN(BUFFER) (((BUFFER) & 0x007ff000) >> 12)
#define MBOX_RESP_CLIENT_ID(BUFFER) (((BUFFER) & 0xf0000000) >> 28)
#define MBOX_RESP_JOB_ID(BUFFER) (((BUFFER) & 0x0f000000) >> 24)
#define MBOX_STATUS_UA_MASK (1<<8)
/* Mailbox command and response */
#define MBOX_CMD_FREE_OFFSET 0x14
#define MBOX_CMD_BUFFER_SIZE 32
#define MBOX_CLIENT_ID_CMD(CLIENT_ID) ((CLIENT_ID) << 28)
#define MBOX_JOB_ID_CMD(JOB_ID) (JOB_ID<<24)
#define MBOX_CMD_LEN_CMD(CMD_LEN) ((CMD_LEN) << 12)
#define MBOX_INDIRECT (1 << 11)
#define MBOX_INSUFFICIENT_BUFFER -2
#define MBOX_CIN 0x00
#define MBOX_ROUT 0x04
#define MBOX_URG 0x08
#define MBOX_INT 0x0C
#define MBOX_COUT 0x20
#define MBOX_RIN 0x24
#define MBOX_STATUS 0x2C
#define MBOX_CMD_BUFFER 0x40
#define MBOX_RESP_BUFFER 0xC0
#define MBOX_RESP_BUFFER_SIZE 16
#define MBOX_RESP_OK 0
#define MBOX_RESP_INVALID_CMD 1
#define MBOX_RESP_UNKNOWN_BR 2
#define MBOX_RESP_UNKNOWN 3
#define MBOX_RESP_NOT_CONFIGURED 256
/* Mailbox SDM doorbell */
#define MBOX_DOORBELL_TO_SDM 0x400
#define MBOX_DOORBELL_FROM_SDM 0x480
/* Mailbox QSPI commands */
#define MBOX_CMD_RESTART 2
#define MBOX_CMD_QSPI_OPEN 50
#define MBOX_CMD_QSPI_CLOSE 51
#define MBOX_CMD_QSPI_DIRECT 59
#define MBOX_CMD_GET_IDCODE 16
#define MBOX_CMD_QSPI_SET_CS 52
/* Mailbox REBOOT commands */
#define MBOX_CMD_REBOOT_HPS 71
/* Generic error handling */
#define MBOX_TIMEOUT -2047
#define MBOX_NO_RESPONSE -2
#define MBOX_WRONG_ID -3
/* Mailbox status */
#define RECONFIG_STATUS_STATE 0
#define RECONFIG_STATUS_PIN_STATUS 2
#define RECONFIG_STATUS_SOFTFUNC_STATUS 3
#define PIN_STATUS_NSTATUS (U(1) << 31)
#define SOFTFUNC_STATUS_SEU_ERROR (1 << 3)
#define SOFTFUNC_STATUS_INIT_DONE (1 << 1)
#define SOFTFUNC_STATUS_CONF_DONE (1 << 0)
#define MBOX_CFGSTAT_STATE_CONFIG 0x10000000
/* SMC function IDs for SiP Service queries */
#define SIP_SVC_CALL_COUNT 0x8200ff00
#define SIP_SVC_UID 0x8200ff01
#define SIP_SVC_VERSION 0x8200ff03
/* SiP Service Calls version numbers */
#define SIP_SVC_VERSION_MAJOR 0
#define SIP_SVC_VERSION_MINOR 1
/* Mailbox reconfiguration commands */
#define MBOX_RECONFIG 6
#define MBOX_RECONFIG_DATA 8
#define MBOX_RECONFIG_STATUS 9
/* Sip get memory */
#define INTEL_SIP_SMC_FPGA_CONFIG_START 0xC2000001
#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM 0xC2000005
#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE 0xC2000004
#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE 0x42000002
#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE 0xC2000003
#define INTEL_SIP_SMC_STATUS_OK 0
#define INTEL_SIP_SMC_STATUS_ERROR 0x4
#define INTEL_SIP_SMC_STATUS_BUSY 0x1
#define INTEL_SIP_SMC_STATUS_REJECTED 0x2
#define INTEL_SIP_SMC_FPGA_CONFIG_ADDR 0x1000
#define INTEL_SIP_SMC_FPGA_CONFIG_SIZE 16777216
void mailbox_set_int(int interrupt_input);
int mailbox_init(void);
void mailbox_set_qspi_close(void);
void mailbox_set_qspi_open(void);
void mailbox_set_qspi_direct(void);
int mailbox_send_cmd(int job_id, unsigned int cmd, uint32_t *args,
int len, int urgent, uint32_t *response);
void mailbox_send_cmd_async(int job_id, unsigned int cmd, uint32_t *args,
int len, int urgent);
int mailbox_read_response(int job_id, uint32_t *response);
int mailbox_get_qspi_clock(void);
void mailbox_reset_cold(void);
#endif