tf-a/tf-a-stm32mp-2.2.r1/plat/intel/soc/common/drivers/qspi/cadence_qspi.h

179 lines
6.1 KiB
C
Raw Normal View History

2024-01-10 05:21:13 +00:00
/*
* Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2019, Intel Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef CAD_QSPI_H
#define CAD_QSPI_H
#define CAD_QSPI_MICRON_N25Q_SUPPORT 1
#define CAD_QSPI_OFFSET 0xff8d2000
#define CAD_INVALID -1
#define CAD_QSPI_ERROR -2
#define CAD_QSPI_ADDR_FASTREAD 0
#define CAD_QSPI_ADDR_FASTREAD_DUAL_IO 1
#define CAD_QSPI_ADDR_FASTREAD_QUAD_IO 2
#define CAT_QSPI_ADDR_SINGLE_IO 0
#define CAT_QSPI_ADDR_DUAL_IO 1
#define CAT_QSPI_ADDR_QUAD_IO 2
#define CAD_QSPI_BANK_ADDR(x) ((x) >> 24)
#define CAD_QSPI_BANK_ADDR_MSK 0xff000000
#define CAD_QSPI_COMMAND_TIMEOUT 0x10000000
#define CAD_QSPI_CFG 0x0
#define CAD_QSPI_CFG_BAUDDIV_MSK 0xff87ffff
#define CAD_QSPI_CFG_BAUDDIV(x) (((x) << 19) & 0x780000)
#define CAD_QSPI_CFG_CS_MSK ~0x3c00
#define CAD_QSPI_CFG_CS(x) (((x) << 11))
#define CAD_QSPI_CFG_ENABLE (1 << 0)
#define CAD_QSPI_CFG_ENDMA_CLR_MSK 0xffff7fff
#define CAD_QSPI_CFG_IDLE (1U << 31)
#define CAD_QSPI_CFG_SELCLKPHASE_CLR_MSK 0xfffffffb
#define CAD_QSPI_CFG_SELCLKPOL_CLR_MSK 0xfffffffd
#define CAD_QSPIDATA_OFST 0xff900000
#define CAD_QSPI_DELAY 0xc
#define CAD_QSPI_DELAY_CSSOT(x) (((x) & 0xff) << 0)
#define CAD_QSPI_DELAY_CSEOT(x) (((x) & 0xff) << 8)
#define CAD_QSPI_DELAY_CSDADS(x) (((x) & 0xff) << 16)
#define CAD_QSPI_DELAY_CSDA(x) (((x) & 0xff) << 24)
#define CAD_QSPI_DEVSZ 0x14
#define CAD_QSPI_DEVSZ_ADDR_BYTES(x) ((x) << 0)
#define CAD_QSPI_DEVSZ_BYTES_PER_PAGE(x) ((x) << 4)
#define CAD_QSPI_DEVSZ_BYTES_PER_BLOCK(x) ((x) << 16)
#define CAD_QSPI_DEVWR 0x8
#define CAD_QSPI_DEVRD 0x4
#define CAD_QSPI_DEV_OPCODE(x) (((x) & 0xff) << 0)
#define CAD_QSPI_DEV_INST_TYPE(x) (((x) & 0x03) << 8)
#define CAD_QSPI_DEV_ADDR_TYPE(x) (((x) & 0x03) << 12)
#define CAD_QSPI_DEV_DATA_TYPE(x) (((x) & 0x03) << 16)
#define CAD_QSPI_DEV_MODE_BIT(x) (((x) & 0x01) << 20)
#define CAD_QSPI_DEV_DUMMY_CLK_CYCLE(x) (((x) & 0x0f) << 24)
#define CAD_QSPI_FLASHCMD 0x90
#define CAD_QSPI_FLASHCMD_ADDR 0x94
#define CAD_QSPI_FLASHCMD_EXECUTE 0x1
#define CAD_QSPI_FLASHCMD_EXECUTE_STAT 0x2
#define CAD_QSPI_FLASHCMD_NUM_DUMMYBYTES_MAX 5
#define CAD_QSPI_FLASHCMD_NUM_DUMMYBYTES(x) (((x) << 7) & 0x000f80)
#define CAD_QSPI_FLASHCMD_OPCODE(x) (((x) & 0xff) << 24)
#define CAD_QSPI_FLASHCMD_ENRDDATA(x) (((x) & 1) << 23)
#define CAD_QSPI_FLASHCMD_NUMRDDATABYTES(x) (((x) & 0xf) << 20)
#define CAD_QSPI_FLASHCMD_ENCMDADDR(x) (((x) & 1) << 19)
#define CAD_QSPI_FLASHCMD_ENMODEBIT(x) (((x) & 1) << 18)
#define CAD_QSPI_FLASHCMD_NUMADDRBYTES(x) (((x) & 0x3) << 16)
#define CAD_QSPI_FLASHCMD_ENWRDATA(x) (((x) & 1) << 15)
#define CAD_QSPI_FLASHCMD_NUMWRDATABYTES(x) (((x) & 0x7) << 12)
#define CAD_QSPI_FLASHCMD_NUMDUMMYBYTES(x) (((x) & 0x1f) << 7)
#define CAD_QSPI_FLASHCMD_RDDATA0 0xa0
#define CAD_QSPI_FLASHCMD_RDDATA1 0xa4
#define CAD_QSPI_FLASHCMD_WRDATA0 0xa8
#define CAD_QSPI_FLASHCMD_WRDATA1 0xac
#define CAD_QSPI_RDDATACAP 0x10
#define CAD_QSPI_RDDATACAP_BYP(x) (((x) & 1) << 0)
#define CAD_QSPI_RDDATACAP_DELAY(x) (((x) & 0xf) << 1)
#define CAD_QSPI_REMAPADDR 0x24
#define CAD_QSPI_REMAPADDR_VALUE_SET(x) (((x) & 0xffffffff) << 0)
#define CAD_QSPI_SRAMPART 0x18
#define CAD_QSPI_SRAMFILL 0x2c
#define CAD_QSPI_SRAMPART_ADDR(x) (((x) >> 0) & 0x3ff)
#define CAD_QSPI_SRAM_FIFO_ENTRY_COUNT (512 / sizeof(uint32_t))
#define CAD_QSPI_SRAMFILL_INDWRPART(x) (((x) >> 16) & 0x00ffff)
#define CAD_QSPI_SRAMFILL_INDRDPART(x) (((x) >> 0) & 0x00ffff)
#define CAD_QSPI_SELCLKPHASE(x) (((x) & 1) << 2)
#define CAD_QSPI_SELCLKPOL(x) (((x) & 1) << 1)
#define CAD_QSPI_STIG_FLAGSR_PROGRAMREADY(x) (((x) >> 7) & 1)
#define CAD_QSPI_STIG_FLAGSR_ERASEREADY(x) (((x) >> 7) & 1)
#define CAD_QSPI_STIG_FLAGSR_ERASEERROR(x) (((x) >> 5) & 1)
#define CAD_QSPI_STIG_FLAGSR_PROGRAMERROR(x) (((x) >> 4) & 1)
#define CAD_QSPI_STIG_OPCODE_CLFSR 0x50
#define CAD_QSPI_STIG_OPCODE_RDID 0x9f
#define CAD_QSPI_STIG_OPCODE_WRDIS 0x4
#define CAD_QSPI_STIG_OPCODE_WREN 0x6
#define CAD_QSPI_STIG_OPCODE_SUBSEC_ERASE 0x20
#define CAD_QSPI_STIG_OPCODE_SEC_ERASE 0xd8
#define CAD_QSPI_STIG_OPCODE_WREN_EXT_REG 0xc5
#define CAD_QSPI_STIG_OPCODE_DIE_ERASE 0xc4
#define CAD_QSPI_STIG_OPCODE_BULK_ERASE 0xc7
#define CAD_QSPI_STIG_OPCODE_RDSR 0x5
#define CAD_QSPI_STIG_OPCODE_RDFLGSR 0x70
#define CAD_QSPI_STIG_OPCODE_RESET_EN 0x66
#define CAD_QSPI_STIG_OPCODE_RESET_MEM 0x99
#define CAD_QSPI_STIG_RDID_CAPACITYID(x) (((x) >> 16) & 0xff)
#define CAD_QSPI_STIG_SR_BUSY(x) (((x) >> 0) & 1)
#define CAD_QSPI_INST_SINGLE 0
#define CAD_QSPI_INST_DUAL 1
#define CAD_QSPI_INST_QUAD 2
#define CAD_QSPI_INDRDSTADDR 0x68
#define CAD_QSPI_INDRDCNT 0x6c
#define CAD_QSPI_INDRD 0x60
#define CAD_QSPI_INDRD_RD_STAT(x) (((x) >> 2) & 1)
#define CAD_QSPI_INDRD_START 1
#define CAD_QSPI_INDRD_IND_OPS_DONE 0x20
#define CAD_QSPI_INDWR 0x70
#define CAD_QSPI_INDWR_RDSTAT(x) (((x) >> 2) & 1)
#define CAD_QSPI_INDWRSTADDR 0x78
#define CAD_QSPI_INDWRCNT 0x7c
#define CAD_QSPI_INDWR 0x70
#define CAD_QSPI_INDWR_START 0x1
#define CAD_QSPI_INDWR_INDDONE 0x20
#define CAD_QSPI_INT_STATUS_ALL 0x0000ffff
#define CAD_QSPI_N25Q_DIE_SIZE 0x02000000
#define CAD_QSPI_BANK_SIZE 0x01000000
#define CAD_QSPI_PAGE_SIZE 0x00000100
#define CAD_QSPI_IRQMSK 0x44
#define CAD_QSPI_SUBSECTOR_SIZE 0x1000
#define INTEL_QSPI_ADDR_BYTES 2
#define INTEL_QSPI_BYTES_PER_DEV 256
#define INTEL_BYTES_PER_BLOCK 16
#define QSPI_FAST_READ 0xb
#define QSPI_WRITE 0x2
// QSPI CONFIGURATIONS
#define QSPI_CONFIG_CPOL 1
#define QSPI_CONFIG_CPHA 1
#define QSPI_CONFIG_CSSOT 0x14
#define QSPI_CONFIG_CSEOT 0x14
#define QSPI_CONFIG_CSDADS 0xff
#define QSPI_CONFIG_CSDA 0xc8
int cad_qspi_init(uint32_t desired_clk_freq, uint32_t clk_phase,
uint32_t clk_pol, uint32_t csda, uint32_t csdads,
uint32_t cseot, uint32_t cssot, uint32_t rddatacap);
void cad_qspi_set_chip_select(int cs);
int cad_qspi_erase(uint32_t offset, uint32_t size);
int cad_qspi_write(void *buffer, uint32_t offset, uint32_t size);
int cad_qspi_read(void *buffer, uint32_t offset, uint32_t size);
int cad_qspi_update(void *buffer, uint32_t offset, uint32_t size);
#endif