416 lines
10 KiB
C
416 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* at91_cf.c -- AT91 CompactFlash controller driver
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_data/atmel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/atmel-mc.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <pcmcia/ss.h>
|
|
|
|
/*
|
|
* A0..A10 work in each range; A23 indicates I/O space; A25 is CFRNW;
|
|
* some other bit in {A24,A22..A11} is nREG to flag memory access
|
|
* (vs attributes). So more than 2KB/region would just be waste.
|
|
* Note: These are offsets from the physical base address.
|
|
*/
|
|
#define CF_ATTR_PHYS (0)
|
|
#define CF_IO_PHYS (1 << 23)
|
|
#define CF_MEM_PHYS (0x017ff800)
|
|
|
|
struct regmap *mc;
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
struct at91_cf_socket {
|
|
struct pcmcia_socket socket;
|
|
|
|
unsigned present:1;
|
|
|
|
struct platform_device *pdev;
|
|
struct at91_cf_data *board;
|
|
|
|
unsigned long phys_baseaddr;
|
|
};
|
|
|
|
static inline int at91_cf_present(struct at91_cf_socket *cf)
|
|
{
|
|
return !gpio_get_value(cf->board->det_pin);
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int at91_cf_ss_init(struct pcmcia_socket *s)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t at91_cf_irq(int irq, void *_cf)
|
|
{
|
|
struct at91_cf_socket *cf = _cf;
|
|
|
|
if (irq == gpio_to_irq(cf->board->det_pin)) {
|
|
unsigned present = at91_cf_present(cf);
|
|
|
|
/* kick pccard as needed */
|
|
if (present != cf->present) {
|
|
cf->present = present;
|
|
dev_dbg(&cf->pdev->dev, "card %s\n",
|
|
present ? "present" : "gone");
|
|
pcmcia_parse_events(&cf->socket, SS_DETECT);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
|
|
if (!sp)
|
|
return -EINVAL;
|
|
|
|
cf = container_of(s, struct at91_cf_socket, socket);
|
|
|
|
/* NOTE: CF is always 3VCARD */
|
|
if (at91_cf_present(cf)) {
|
|
int rdy = gpio_is_valid(cf->board->irq_pin); /* RDY/nIRQ */
|
|
int vcc = gpio_is_valid(cf->board->vcc_pin);
|
|
|
|
*sp = SS_DETECT | SS_3VCARD;
|
|
if (!rdy || gpio_get_value(cf->board->irq_pin))
|
|
*sp |= SS_READY;
|
|
if (!vcc || gpio_get_value(cf->board->vcc_pin))
|
|
*sp |= SS_POWERON;
|
|
} else
|
|
*sp = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
|
|
cf = container_of(sock, struct at91_cf_socket, socket);
|
|
|
|
/* switch Vcc if needed and possible */
|
|
if (gpio_is_valid(cf->board->vcc_pin)) {
|
|
switch (s->Vcc) {
|
|
case 0:
|
|
gpio_set_value(cf->board->vcc_pin, 0);
|
|
break;
|
|
case 33:
|
|
gpio_set_value(cf->board->vcc_pin, 1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* toggle reset if needed */
|
|
gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET);
|
|
|
|
dev_dbg(&cf->pdev->dev, "Vcc %d, io_irq %d, flags %04x csc %04x\n",
|
|
s->Vcc, s->io_irq, s->flags, s->csc_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_cf_ss_suspend(struct pcmcia_socket *s)
|
|
{
|
|
return at91_cf_set_socket(s, &dead_socket);
|
|
}
|
|
|
|
/* we already mapped the I/O region */
|
|
static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
u32 csr;
|
|
|
|
cf = container_of(s, struct at91_cf_socket, socket);
|
|
io->flags &= (MAP_ACTIVE | MAP_16BIT | MAP_AUTOSZ);
|
|
|
|
/*
|
|
* Use 16 bit accesses unless/until we need 8-bit i/o space.
|
|
*
|
|
* NOTE: this CF controller ignores IOIS16, so we can't really do
|
|
* MAP_AUTOSZ. The 16bit mode allows single byte access on either
|
|
* D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many
|
|
* purposes (and handles ide-cs).
|
|
*
|
|
* The 8bit mode is needed for odd byte access on D0-D7. It seems
|
|
* some cards only like that way to get at the odd byte, despite
|
|
* CF 3.0 spec table 35 also giving the D8-D15 option.
|
|
*/
|
|
if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
|
|
csr = AT91_MC_SMC_DBW_8;
|
|
dev_dbg(&cf->pdev->dev, "8bit i/o bus\n");
|
|
} else {
|
|
csr = AT91_MC_SMC_DBW_16;
|
|
dev_dbg(&cf->pdev->dev, "16bit i/o bus\n");
|
|
}
|
|
regmap_update_bits(mc, AT91_MC_SMC_CSR(cf->board->chipselect),
|
|
AT91_MC_SMC_DBW, csr);
|
|
|
|
io->start = cf->socket.io_offset;
|
|
io->stop = io->start + SZ_2K - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* pcmcia layer maps/unmaps mem regions */
|
|
static int
|
|
at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
|
|
if (map->card_start)
|
|
return -EINVAL;
|
|
|
|
cf = container_of(s, struct at91_cf_socket, socket);
|
|
|
|
map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT);
|
|
if (map->flags & MAP_ATTRIB)
|
|
map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS;
|
|
else
|
|
map->static_start = cf->phys_baseaddr + CF_MEM_PHYS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pccard_operations at91_cf_ops = {
|
|
.init = at91_cf_ss_init,
|
|
.suspend = at91_cf_ss_suspend,
|
|
.get_status = at91_cf_get_status,
|
|
.set_socket = at91_cf_set_socket,
|
|
.set_io_map = at91_cf_set_io_map,
|
|
.set_mem_map = at91_cf_set_mem_map,
|
|
};
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id at91_cf_dt_ids[] = {
|
|
{ .compatible = "atmel,at91rm9200-cf" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, at91_cf_dt_ids);
|
|
|
|
static int at91_cf_dt_init(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_data *board;
|
|
|
|
board = devm_kzalloc(&pdev->dev, sizeof(*board), GFP_KERNEL);
|
|
if (!board)
|
|
return -ENOMEM;
|
|
|
|
board->irq_pin = of_get_gpio(pdev->dev.of_node, 0);
|
|
board->det_pin = of_get_gpio(pdev->dev.of_node, 1);
|
|
board->vcc_pin = of_get_gpio(pdev->dev.of_node, 2);
|
|
board->rst_pin = of_get_gpio(pdev->dev.of_node, 3);
|
|
|
|
pdev->dev.platform_data = board;
|
|
|
|
mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc");
|
|
|
|
return PTR_ERR_OR_ZERO(mc);
|
|
}
|
|
#else
|
|
static int at91_cf_dt_init(struct platform_device *pdev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int at91_cf_probe(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
struct at91_cf_data *board = pdev->dev.platform_data;
|
|
struct resource *io;
|
|
int status;
|
|
|
|
if (!board) {
|
|
status = at91_cf_dt_init(pdev);
|
|
if (status)
|
|
return status;
|
|
|
|
board = pdev->dev.platform_data;
|
|
}
|
|
|
|
if (!gpio_is_valid(board->det_pin) || !gpio_is_valid(board->rst_pin))
|
|
return -ENODEV;
|
|
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!io)
|
|
return -ENODEV;
|
|
|
|
cf = devm_kzalloc(&pdev->dev, sizeof(*cf), GFP_KERNEL);
|
|
if (!cf)
|
|
return -ENOMEM;
|
|
|
|
cf->board = board;
|
|
cf->pdev = pdev;
|
|
cf->phys_baseaddr = io->start;
|
|
platform_set_drvdata(pdev, cf);
|
|
|
|
/* must be a GPIO; ergo must trigger on both edges */
|
|
status = devm_gpio_request(&pdev->dev, board->det_pin, "cf_det");
|
|
if (status < 0)
|
|
return status;
|
|
|
|
status = devm_request_irq(&pdev->dev, gpio_to_irq(board->det_pin),
|
|
at91_cf_irq, 0, "at91_cf detect", cf);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
status = devm_gpio_request(&pdev->dev, board->rst_pin, "cf_rst");
|
|
if (status < 0)
|
|
goto fail0a;
|
|
|
|
if (gpio_is_valid(board->vcc_pin)) {
|
|
status = devm_gpio_request(&pdev->dev, board->vcc_pin, "cf_vcc");
|
|
if (status < 0)
|
|
goto fail0a;
|
|
}
|
|
|
|
/*
|
|
* The card driver will request this irq later as needed.
|
|
* but it causes lots of "irqNN: nobody cared" messages
|
|
* unless we report that we handle everything (sigh).
|
|
* (Note: DK board doesn't wire the IRQ pin...)
|
|
*/
|
|
if (gpio_is_valid(board->irq_pin)) {
|
|
status = devm_gpio_request(&pdev->dev, board->irq_pin, "cf_irq");
|
|
if (status < 0)
|
|
goto fail0a;
|
|
|
|
status = devm_request_irq(&pdev->dev, gpio_to_irq(board->irq_pin),
|
|
at91_cf_irq, IRQF_SHARED, "at91_cf", cf);
|
|
if (status < 0)
|
|
goto fail0a;
|
|
cf->socket.pci_irq = gpio_to_irq(board->irq_pin);
|
|
} else
|
|
cf->socket.pci_irq = nr_irqs + 1;
|
|
|
|
/*
|
|
* pcmcia layer only remaps "real" memory not iospace
|
|
* io_offset is set to 0x10000 to avoid the check in static_find_io().
|
|
* */
|
|
cf->socket.io_offset = 0x10000;
|
|
status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS);
|
|
if (status)
|
|
goto fail0a;
|
|
|
|
/* reserve chip-select regions */
|
|
if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) {
|
|
status = -ENXIO;
|
|
goto fail0a;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "irqs det #%d, io #%d\n",
|
|
gpio_to_irq(board->det_pin), gpio_to_irq(board->irq_pin));
|
|
|
|
cf->socket.owner = THIS_MODULE;
|
|
cf->socket.dev.parent = &pdev->dev;
|
|
cf->socket.ops = &at91_cf_ops;
|
|
cf->socket.resource_ops = &pccard_static_ops;
|
|
cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
|
|
| SS_CAP_MEM_ALIGN;
|
|
cf->socket.map_size = SZ_2K;
|
|
cf->socket.io[0].res = io;
|
|
|
|
status = pcmcia_register_socket(&cf->socket);
|
|
if (status < 0)
|
|
goto fail0a;
|
|
|
|
return 0;
|
|
|
|
fail0a:
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
return status;
|
|
}
|
|
|
|
static int at91_cf_remove(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
|
|
|
|
pcmcia_unregister_socket(&cf->socket);
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
{
|
|
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
|
|
struct at91_cf_data *board = cf->board;
|
|
|
|
if (device_may_wakeup(&pdev->dev)) {
|
|
enable_irq_wake(gpio_to_irq(board->det_pin));
|
|
if (gpio_is_valid(board->irq_pin))
|
|
enable_irq_wake(gpio_to_irq(board->irq_pin));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int at91_cf_resume(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
|
|
struct at91_cf_data *board = cf->board;
|
|
|
|
if (device_may_wakeup(&pdev->dev)) {
|
|
disable_irq_wake(gpio_to_irq(board->det_pin));
|
|
if (gpio_is_valid(board->irq_pin))
|
|
disable_irq_wake(gpio_to_irq(board->irq_pin));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define at91_cf_suspend NULL
|
|
#define at91_cf_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver at91_cf_driver = {
|
|
.driver = {
|
|
.name = "at91_cf",
|
|
.of_match_table = of_match_ptr(at91_cf_dt_ids),
|
|
},
|
|
.probe = at91_cf_probe,
|
|
.remove = at91_cf_remove,
|
|
.suspend = at91_cf_suspend,
|
|
.resume = at91_cf_resume,
|
|
};
|
|
|
|
module_platform_driver(at91_cf_driver);
|
|
|
|
MODULE_DESCRIPTION("AT91 Compact Flash Driver");
|
|
MODULE_AUTHOR("David Brownell");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:at91_cf");
|