2061 lines
46 KiB
C
2061 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
#include <linux/acpi.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "mdio-i2c.h"
|
|
#include "sfp.h"
|
|
#include "swphy.h"
|
|
|
|
enum {
|
|
GPIO_MODDEF0,
|
|
GPIO_LOS,
|
|
GPIO_TX_FAULT,
|
|
GPIO_TX_DISABLE,
|
|
GPIO_RATE_SELECT,
|
|
GPIO_MAX,
|
|
|
|
SFP_F_PRESENT = BIT(GPIO_MODDEF0),
|
|
SFP_F_LOS = BIT(GPIO_LOS),
|
|
SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT),
|
|
SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE),
|
|
SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT),
|
|
|
|
SFP_E_INSERT = 0,
|
|
SFP_E_REMOVE,
|
|
SFP_E_DEV_DOWN,
|
|
SFP_E_DEV_UP,
|
|
SFP_E_TX_FAULT,
|
|
SFP_E_TX_CLEAR,
|
|
SFP_E_LOS_HIGH,
|
|
SFP_E_LOS_LOW,
|
|
SFP_E_TIMEOUT,
|
|
|
|
SFP_MOD_EMPTY = 0,
|
|
SFP_MOD_PROBE,
|
|
SFP_MOD_HPOWER,
|
|
SFP_MOD_PRESENT,
|
|
SFP_MOD_ERROR,
|
|
|
|
SFP_DEV_DOWN = 0,
|
|
SFP_DEV_UP,
|
|
|
|
SFP_S_DOWN = 0,
|
|
SFP_S_INIT,
|
|
SFP_S_WAIT_LOS,
|
|
SFP_S_LINK_UP,
|
|
SFP_S_TX_FAULT,
|
|
SFP_S_REINIT,
|
|
SFP_S_TX_DISABLE,
|
|
};
|
|
|
|
static const char * const mod_state_strings[] = {
|
|
[SFP_MOD_EMPTY] = "empty",
|
|
[SFP_MOD_PROBE] = "probe",
|
|
[SFP_MOD_HPOWER] = "hpower",
|
|
[SFP_MOD_PRESENT] = "present",
|
|
[SFP_MOD_ERROR] = "error",
|
|
};
|
|
|
|
static const char *mod_state_to_str(unsigned short mod_state)
|
|
{
|
|
if (mod_state >= ARRAY_SIZE(mod_state_strings))
|
|
return "Unknown module state";
|
|
return mod_state_strings[mod_state];
|
|
}
|
|
|
|
static const char * const dev_state_strings[] = {
|
|
[SFP_DEV_DOWN] = "down",
|
|
[SFP_DEV_UP] = "up",
|
|
};
|
|
|
|
static const char *dev_state_to_str(unsigned short dev_state)
|
|
{
|
|
if (dev_state >= ARRAY_SIZE(dev_state_strings))
|
|
return "Unknown device state";
|
|
return dev_state_strings[dev_state];
|
|
}
|
|
|
|
static const char * const event_strings[] = {
|
|
[SFP_E_INSERT] = "insert",
|
|
[SFP_E_REMOVE] = "remove",
|
|
[SFP_E_DEV_DOWN] = "dev_down",
|
|
[SFP_E_DEV_UP] = "dev_up",
|
|
[SFP_E_TX_FAULT] = "tx_fault",
|
|
[SFP_E_TX_CLEAR] = "tx_clear",
|
|
[SFP_E_LOS_HIGH] = "los_high",
|
|
[SFP_E_LOS_LOW] = "los_low",
|
|
[SFP_E_TIMEOUT] = "timeout",
|
|
};
|
|
|
|
static const char *event_to_str(unsigned short event)
|
|
{
|
|
if (event >= ARRAY_SIZE(event_strings))
|
|
return "Unknown event";
|
|
return event_strings[event];
|
|
}
|
|
|
|
static const char * const sm_state_strings[] = {
|
|
[SFP_S_DOWN] = "down",
|
|
[SFP_S_INIT] = "init",
|
|
[SFP_S_WAIT_LOS] = "wait_los",
|
|
[SFP_S_LINK_UP] = "link_up",
|
|
[SFP_S_TX_FAULT] = "tx_fault",
|
|
[SFP_S_REINIT] = "reinit",
|
|
[SFP_S_TX_DISABLE] = "rx_disable",
|
|
};
|
|
|
|
static const char *sm_state_to_str(unsigned short sm_state)
|
|
{
|
|
if (sm_state >= ARRAY_SIZE(sm_state_strings))
|
|
return "Unknown state";
|
|
return sm_state_strings[sm_state];
|
|
}
|
|
|
|
static const char *gpio_of_names[] = {
|
|
"mod-def0",
|
|
"los",
|
|
"tx-fault",
|
|
"tx-disable",
|
|
"rate-select0",
|
|
};
|
|
|
|
static const enum gpiod_flags gpio_flags[] = {
|
|
GPIOD_IN,
|
|
GPIOD_IN,
|
|
GPIOD_IN,
|
|
GPIOD_ASIS,
|
|
GPIOD_ASIS,
|
|
};
|
|
|
|
#define T_INIT_JIFFIES msecs_to_jiffies(300)
|
|
#define T_RESET_US 10
|
|
#define T_FAULT_RECOVER msecs_to_jiffies(1000)
|
|
|
|
/* SFP module presence detection is poor: the three MOD DEF signals are
|
|
* the same length on the PCB, which means it's possible for MOD DEF 0 to
|
|
* connect before the I2C bus on MOD DEF 1/2.
|
|
*
|
|
* The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to
|
|
* be deasserted) but makes no mention of the earliest time before we can
|
|
* access the I2C EEPROM. However, Avago modules require 300ms.
|
|
*/
|
|
#define T_PROBE_INIT msecs_to_jiffies(300)
|
|
#define T_HPOWER_LEVEL msecs_to_jiffies(300)
|
|
#define T_PROBE_RETRY msecs_to_jiffies(100)
|
|
|
|
/* SFP modules appear to always have their PHY configured for bus address
|
|
* 0x56 (which with mdio-i2c, translates to a PHY address of 22).
|
|
*/
|
|
#define SFP_PHY_ADDR 22
|
|
|
|
/* Give this long for the PHY to reset. */
|
|
#define T_PHY_RESET_MS 50
|
|
|
|
struct sff_data {
|
|
unsigned int gpios;
|
|
bool (*module_supported)(const struct sfp_eeprom_id *id);
|
|
};
|
|
|
|
struct sfp {
|
|
struct device *dev;
|
|
struct i2c_adapter *i2c;
|
|
struct mii_bus *i2c_mii;
|
|
struct sfp_bus *sfp_bus;
|
|
struct phy_device *mod_phy;
|
|
const struct sff_data *type;
|
|
u32 max_power_mW;
|
|
|
|
unsigned int (*get_state)(struct sfp *);
|
|
void (*set_state)(struct sfp *, unsigned int);
|
|
int (*read)(struct sfp *, bool, u8, void *, size_t);
|
|
int (*write)(struct sfp *, bool, u8, void *, size_t);
|
|
|
|
struct gpio_desc *gpio[GPIO_MAX];
|
|
int gpio_irq[GPIO_MAX];
|
|
|
|
bool attached;
|
|
struct mutex st_mutex; /* Protects state */
|
|
unsigned int state;
|
|
struct delayed_work poll;
|
|
struct delayed_work timeout;
|
|
struct mutex sm_mutex; /* Protects state machine */
|
|
unsigned char sm_mod_state;
|
|
unsigned char sm_dev_state;
|
|
unsigned short sm_state;
|
|
unsigned int sm_retries;
|
|
|
|
struct sfp_eeprom_id id;
|
|
#if IS_ENABLED(CONFIG_HWMON)
|
|
struct sfp_diag diag;
|
|
struct device *hwmon_dev;
|
|
char *hwmon_name;
|
|
#endif
|
|
|
|
};
|
|
|
|
static bool sff_module_supported(const struct sfp_eeprom_id *id)
|
|
{
|
|
return id->base.phys_id == SFP_PHYS_ID_SFF &&
|
|
id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
|
|
}
|
|
|
|
static const struct sff_data sff_data = {
|
|
.gpios = SFP_F_LOS | SFP_F_TX_FAULT | SFP_F_TX_DISABLE,
|
|
.module_supported = sff_module_supported,
|
|
};
|
|
|
|
static bool sfp_module_supported(const struct sfp_eeprom_id *id)
|
|
{
|
|
return id->base.phys_id == SFP_PHYS_ID_SFP &&
|
|
id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
|
|
}
|
|
|
|
static const struct sff_data sfp_data = {
|
|
.gpios = SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT |
|
|
SFP_F_TX_DISABLE | SFP_F_RATE_SELECT,
|
|
.module_supported = sfp_module_supported,
|
|
};
|
|
|
|
static const struct of_device_id sfp_of_match[] = {
|
|
{ .compatible = "sff,sff", .data = &sff_data, },
|
|
{ .compatible = "sff,sfp", .data = &sfp_data, },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sfp_of_match);
|
|
|
|
static unsigned long poll_jiffies;
|
|
|
|
static unsigned int sfp_gpio_get_state(struct sfp *sfp)
|
|
{
|
|
unsigned int i, state, v;
|
|
|
|
for (i = state = 0; i < GPIO_MAX; i++) {
|
|
if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
|
|
continue;
|
|
|
|
v = gpiod_get_value_cansleep(sfp->gpio[i]);
|
|
if (v)
|
|
state |= BIT(i);
|
|
}
|
|
|
|
return state;
|
|
}
|
|
|
|
static unsigned int sff_gpio_get_state(struct sfp *sfp)
|
|
{
|
|
return sfp_gpio_get_state(sfp) | SFP_F_PRESENT;
|
|
}
|
|
|
|
static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state)
|
|
{
|
|
if (state & SFP_F_PRESENT) {
|
|
/* If the module is present, drive the signals */
|
|
if (sfp->gpio[GPIO_TX_DISABLE])
|
|
gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE],
|
|
state & SFP_F_TX_DISABLE);
|
|
if (state & SFP_F_RATE_SELECT)
|
|
gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT],
|
|
state & SFP_F_RATE_SELECT);
|
|
} else {
|
|
/* Otherwise, let them float to the pull-ups */
|
|
if (sfp->gpio[GPIO_TX_DISABLE])
|
|
gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]);
|
|
if (state & SFP_F_RATE_SELECT)
|
|
gpiod_direction_input(sfp->gpio[GPIO_RATE_SELECT]);
|
|
}
|
|
}
|
|
|
|
static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
|
|
size_t len)
|
|
{
|
|
struct i2c_msg msgs[2];
|
|
u8 bus_addr = a2 ? 0x51 : 0x50;
|
|
size_t this_len;
|
|
int ret;
|
|
|
|
msgs[0].addr = bus_addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = 1;
|
|
msgs[0].buf = &dev_addr;
|
|
msgs[1].addr = bus_addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = buf;
|
|
|
|
while (len) {
|
|
this_len = len;
|
|
if (this_len > 16)
|
|
this_len = 16;
|
|
|
|
msgs[1].len = this_len;
|
|
|
|
ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
break;
|
|
|
|
msgs[1].buf += this_len;
|
|
dev_addr += this_len;
|
|
len -= this_len;
|
|
}
|
|
|
|
return msgs[1].buf - (u8 *)buf;
|
|
}
|
|
|
|
static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
|
|
size_t len)
|
|
{
|
|
struct i2c_msg msgs[1];
|
|
u8 bus_addr = a2 ? 0x51 : 0x50;
|
|
int ret;
|
|
|
|
msgs[0].addr = bus_addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = 1 + len;
|
|
msgs[0].buf = kmalloc(1 + len, GFP_KERNEL);
|
|
if (!msgs[0].buf)
|
|
return -ENOMEM;
|
|
|
|
msgs[0].buf[0] = dev_addr;
|
|
memcpy(&msgs[0].buf[1], buf, len);
|
|
|
|
ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs));
|
|
|
|
kfree(msgs[0].buf);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret == ARRAY_SIZE(msgs) ? len : 0;
|
|
}
|
|
|
|
static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
|
|
{
|
|
struct mii_bus *i2c_mii;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
|
|
return -EINVAL;
|
|
|
|
sfp->i2c = i2c;
|
|
sfp->read = sfp_i2c_read;
|
|
sfp->write = sfp_i2c_write;
|
|
|
|
i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
|
|
if (IS_ERR(i2c_mii))
|
|
return PTR_ERR(i2c_mii);
|
|
|
|
i2c_mii->name = "SFP I2C Bus";
|
|
i2c_mii->phy_mask = ~0;
|
|
|
|
ret = mdiobus_register(i2c_mii);
|
|
if (ret < 0) {
|
|
mdiobus_free(i2c_mii);
|
|
return ret;
|
|
}
|
|
|
|
sfp->i2c_mii = i2c_mii;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Interface */
|
|
static unsigned int sfp_get_state(struct sfp *sfp)
|
|
{
|
|
return sfp->get_state(sfp);
|
|
}
|
|
|
|
static void sfp_set_state(struct sfp *sfp, unsigned int state)
|
|
{
|
|
sfp->set_state(sfp, state);
|
|
}
|
|
|
|
static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
|
|
{
|
|
return sfp->read(sfp, a2, addr, buf, len);
|
|
}
|
|
|
|
static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
|
|
{
|
|
return sfp->write(sfp, a2, addr, buf, len);
|
|
}
|
|
|
|
static unsigned int sfp_check(void *buf, size_t len)
|
|
{
|
|
u8 *p, check;
|
|
|
|
for (p = buf, check = 0; len; p++, len--)
|
|
check += *p;
|
|
|
|
return check;
|
|
}
|
|
|
|
/* hwmon */
|
|
#if IS_ENABLED(CONFIG_HWMON)
|
|
static umode_t sfp_hwmon_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
const struct sfp *sfp = data;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_lcrit_alarm:
|
|
case hwmon_temp_crit_alarm:
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_lcrit:
|
|
case hwmon_temp_crit:
|
|
if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN))
|
|
return 0;
|
|
/* fall through */
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_label:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_in:
|
|
switch (attr) {
|
|
case hwmon_in_min_alarm:
|
|
case hwmon_in_max_alarm:
|
|
case hwmon_in_lcrit_alarm:
|
|
case hwmon_in_crit_alarm:
|
|
case hwmon_in_min:
|
|
case hwmon_in_max:
|
|
case hwmon_in_lcrit:
|
|
case hwmon_in_crit:
|
|
if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN))
|
|
return 0;
|
|
/* fall through */
|
|
case hwmon_in_input:
|
|
case hwmon_in_label:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_min_alarm:
|
|
case hwmon_curr_max_alarm:
|
|
case hwmon_curr_lcrit_alarm:
|
|
case hwmon_curr_crit_alarm:
|
|
case hwmon_curr_min:
|
|
case hwmon_curr_max:
|
|
case hwmon_curr_lcrit:
|
|
case hwmon_curr_crit:
|
|
if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN))
|
|
return 0;
|
|
/* fall through */
|
|
case hwmon_curr_input:
|
|
case hwmon_curr_label:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_power:
|
|
/* External calibration of receive power requires
|
|
* floating point arithmetic. Doing that in the kernel
|
|
* is not easy, so just skip it. If the module does
|
|
* not require external calibration, we can however
|
|
* show receiver power, since FP is then not needed.
|
|
*/
|
|
if (sfp->id.ext.diagmon & SFP_DIAGMON_EXT_CAL &&
|
|
channel == 1)
|
|
return 0;
|
|
switch (attr) {
|
|
case hwmon_power_min_alarm:
|
|
case hwmon_power_max_alarm:
|
|
case hwmon_power_lcrit_alarm:
|
|
case hwmon_power_crit_alarm:
|
|
case hwmon_power_min:
|
|
case hwmon_power_max:
|
|
case hwmon_power_lcrit:
|
|
case hwmon_power_crit:
|
|
if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN))
|
|
return 0;
|
|
/* fall through */
|
|
case hwmon_power_input:
|
|
case hwmon_power_label:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int sfp_hwmon_read_sensor(struct sfp *sfp, int reg, long *value)
|
|
{
|
|
__be16 val;
|
|
int err;
|
|
|
|
err = sfp_read(sfp, true, reg, &val, sizeof(val));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = be16_to_cpu(val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sfp_hwmon_to_rx_power(long *value)
|
|
{
|
|
*value = DIV_ROUND_CLOSEST(*value, 10);
|
|
}
|
|
|
|
static void sfp_hwmon_calibrate(struct sfp *sfp, unsigned int slope, int offset,
|
|
long *value)
|
|
{
|
|
if (sfp->id.ext.diagmon & SFP_DIAGMON_EXT_CAL)
|
|
*value = DIV_ROUND_CLOSEST(*value * slope, 256) + offset;
|
|
}
|
|
|
|
static void sfp_hwmon_calibrate_temp(struct sfp *sfp, long *value)
|
|
{
|
|
sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_t_slope),
|
|
be16_to_cpu(sfp->diag.cal_t_offset), value);
|
|
|
|
if (*value >= 0x8000)
|
|
*value -= 0x10000;
|
|
|
|
*value = DIV_ROUND_CLOSEST(*value * 1000, 256);
|
|
}
|
|
|
|
static void sfp_hwmon_calibrate_vcc(struct sfp *sfp, long *value)
|
|
{
|
|
sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_v_slope),
|
|
be16_to_cpu(sfp->diag.cal_v_offset), value);
|
|
|
|
*value = DIV_ROUND_CLOSEST(*value, 10);
|
|
}
|
|
|
|
static void sfp_hwmon_calibrate_bias(struct sfp *sfp, long *value)
|
|
{
|
|
sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_txi_slope),
|
|
be16_to_cpu(sfp->diag.cal_txi_offset), value);
|
|
|
|
*value = DIV_ROUND_CLOSEST(*value, 500);
|
|
}
|
|
|
|
static void sfp_hwmon_calibrate_tx_power(struct sfp *sfp, long *value)
|
|
{
|
|
sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_txpwr_slope),
|
|
be16_to_cpu(sfp->diag.cal_txpwr_offset), value);
|
|
|
|
*value = DIV_ROUND_CLOSEST(*value, 10);
|
|
}
|
|
|
|
static int sfp_hwmon_read_temp(struct sfp *sfp, int reg, long *value)
|
|
{
|
|
int err;
|
|
|
|
err = sfp_hwmon_read_sensor(sfp, reg, value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sfp_hwmon_calibrate_temp(sfp, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_hwmon_read_vcc(struct sfp *sfp, int reg, long *value)
|
|
{
|
|
int err;
|
|
|
|
err = sfp_hwmon_read_sensor(sfp, reg, value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sfp_hwmon_calibrate_vcc(sfp, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_hwmon_read_bias(struct sfp *sfp, int reg, long *value)
|
|
{
|
|
int err;
|
|
|
|
err = sfp_hwmon_read_sensor(sfp, reg, value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sfp_hwmon_calibrate_bias(sfp, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_hwmon_read_tx_power(struct sfp *sfp, int reg, long *value)
|
|
{
|
|
int err;
|
|
|
|
err = sfp_hwmon_read_sensor(sfp, reg, value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sfp_hwmon_calibrate_tx_power(sfp, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_hwmon_read_rx_power(struct sfp *sfp, int reg, long *value)
|
|
{
|
|
int err;
|
|
|
|
err = sfp_hwmon_read_sensor(sfp, reg, value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sfp_hwmon_to_rx_power(value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_hwmon_temp(struct sfp *sfp, u32 attr, long *value)
|
|
{
|
|
u8 status;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
return sfp_hwmon_read_temp(sfp, SFP_TEMP, value);
|
|
|
|
case hwmon_temp_lcrit:
|
|
*value = be16_to_cpu(sfp->diag.temp_low_alarm);
|
|
sfp_hwmon_calibrate_temp(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_temp_min:
|
|
*value = be16_to_cpu(sfp->diag.temp_low_warn);
|
|
sfp_hwmon_calibrate_temp(sfp, value);
|
|
return 0;
|
|
case hwmon_temp_max:
|
|
*value = be16_to_cpu(sfp->diag.temp_high_warn);
|
|
sfp_hwmon_calibrate_temp(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_temp_crit:
|
|
*value = be16_to_cpu(sfp->diag.temp_high_alarm);
|
|
sfp_hwmon_calibrate_temp(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_temp_lcrit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_TEMP_LOW);
|
|
return 0;
|
|
|
|
case hwmon_temp_min_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_TEMP_LOW);
|
|
return 0;
|
|
|
|
case hwmon_temp_max_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_TEMP_HIGH);
|
|
return 0;
|
|
|
|
case hwmon_temp_crit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_TEMP_HIGH);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int sfp_hwmon_vcc(struct sfp *sfp, u32 attr, long *value)
|
|
{
|
|
u8 status;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
return sfp_hwmon_read_vcc(sfp, SFP_VCC, value);
|
|
|
|
case hwmon_in_lcrit:
|
|
*value = be16_to_cpu(sfp->diag.volt_low_alarm);
|
|
sfp_hwmon_calibrate_vcc(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_in_min:
|
|
*value = be16_to_cpu(sfp->diag.volt_low_warn);
|
|
sfp_hwmon_calibrate_vcc(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_in_max:
|
|
*value = be16_to_cpu(sfp->diag.volt_high_warn);
|
|
sfp_hwmon_calibrate_vcc(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_in_crit:
|
|
*value = be16_to_cpu(sfp->diag.volt_high_alarm);
|
|
sfp_hwmon_calibrate_vcc(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_in_lcrit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_VCC_LOW);
|
|
return 0;
|
|
|
|
case hwmon_in_min_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_VCC_LOW);
|
|
return 0;
|
|
|
|
case hwmon_in_max_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_VCC_HIGH);
|
|
return 0;
|
|
|
|
case hwmon_in_crit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_VCC_HIGH);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int sfp_hwmon_bias(struct sfp *sfp, u32 attr, long *value)
|
|
{
|
|
u8 status;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
return sfp_hwmon_read_bias(sfp, SFP_TX_BIAS, value);
|
|
|
|
case hwmon_curr_lcrit:
|
|
*value = be16_to_cpu(sfp->diag.bias_low_alarm);
|
|
sfp_hwmon_calibrate_bias(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_curr_min:
|
|
*value = be16_to_cpu(sfp->diag.bias_low_warn);
|
|
sfp_hwmon_calibrate_bias(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_curr_max:
|
|
*value = be16_to_cpu(sfp->diag.bias_high_warn);
|
|
sfp_hwmon_calibrate_bias(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_curr_crit:
|
|
*value = be16_to_cpu(sfp->diag.bias_high_alarm);
|
|
sfp_hwmon_calibrate_bias(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_curr_lcrit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_TX_BIAS_LOW);
|
|
return 0;
|
|
|
|
case hwmon_curr_min_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_TX_BIAS_LOW);
|
|
return 0;
|
|
|
|
case hwmon_curr_max_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_TX_BIAS_HIGH);
|
|
return 0;
|
|
|
|
case hwmon_curr_crit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_TX_BIAS_HIGH);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int sfp_hwmon_tx_power(struct sfp *sfp, u32 attr, long *value)
|
|
{
|
|
u8 status;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
return sfp_hwmon_read_tx_power(sfp, SFP_TX_POWER, value);
|
|
|
|
case hwmon_power_lcrit:
|
|
*value = be16_to_cpu(sfp->diag.txpwr_low_alarm);
|
|
sfp_hwmon_calibrate_tx_power(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_power_min:
|
|
*value = be16_to_cpu(sfp->diag.txpwr_low_warn);
|
|
sfp_hwmon_calibrate_tx_power(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_power_max:
|
|
*value = be16_to_cpu(sfp->diag.txpwr_high_warn);
|
|
sfp_hwmon_calibrate_tx_power(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_power_crit:
|
|
*value = be16_to_cpu(sfp->diag.txpwr_high_alarm);
|
|
sfp_hwmon_calibrate_tx_power(sfp, value);
|
|
return 0;
|
|
|
|
case hwmon_power_lcrit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_TXPWR_LOW);
|
|
return 0;
|
|
|
|
case hwmon_power_min_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_TXPWR_LOW);
|
|
return 0;
|
|
|
|
case hwmon_power_max_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN0_TXPWR_HIGH);
|
|
return 0;
|
|
|
|
case hwmon_power_crit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM0_TXPWR_HIGH);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int sfp_hwmon_rx_power(struct sfp *sfp, u32 attr, long *value)
|
|
{
|
|
u8 status;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
return sfp_hwmon_read_rx_power(sfp, SFP_RX_POWER, value);
|
|
|
|
case hwmon_power_lcrit:
|
|
*value = be16_to_cpu(sfp->diag.rxpwr_low_alarm);
|
|
sfp_hwmon_to_rx_power(value);
|
|
return 0;
|
|
|
|
case hwmon_power_min:
|
|
*value = be16_to_cpu(sfp->diag.rxpwr_low_warn);
|
|
sfp_hwmon_to_rx_power(value);
|
|
return 0;
|
|
|
|
case hwmon_power_max:
|
|
*value = be16_to_cpu(sfp->diag.rxpwr_high_warn);
|
|
sfp_hwmon_to_rx_power(value);
|
|
return 0;
|
|
|
|
case hwmon_power_crit:
|
|
*value = be16_to_cpu(sfp->diag.rxpwr_high_alarm);
|
|
sfp_hwmon_to_rx_power(value);
|
|
return 0;
|
|
|
|
case hwmon_power_lcrit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM1, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM1_RXPWR_LOW);
|
|
return 0;
|
|
|
|
case hwmon_power_min_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN1, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN1_RXPWR_LOW);
|
|
return 0;
|
|
|
|
case hwmon_power_max_alarm:
|
|
err = sfp_read(sfp, true, SFP_WARN1, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_WARN1_RXPWR_HIGH);
|
|
return 0;
|
|
|
|
case hwmon_power_crit_alarm:
|
|
err = sfp_read(sfp, true, SFP_ALARM1, &status, sizeof(status));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*value = !!(status & SFP_ALARM1_RXPWR_HIGH);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int sfp_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *value)
|
|
{
|
|
struct sfp *sfp = dev_get_drvdata(dev);
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
return sfp_hwmon_temp(sfp, attr, value);
|
|
case hwmon_in:
|
|
return sfp_hwmon_vcc(sfp, attr, value);
|
|
case hwmon_curr:
|
|
return sfp_hwmon_bias(sfp, attr, value);
|
|
case hwmon_power:
|
|
switch (channel) {
|
|
case 0:
|
|
return sfp_hwmon_tx_power(sfp, attr, value);
|
|
case 1:
|
|
return sfp_hwmon_rx_power(sfp, attr, value);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static const char *const sfp_hwmon_power_labels[] = {
|
|
"TX_power",
|
|
"RX_power",
|
|
};
|
|
|
|
static int sfp_hwmon_read_string(struct device *dev,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel, const char **str)
|
|
{
|
|
switch (type) {
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_label:
|
|
*str = "bias";
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_label:
|
|
*str = "temperature";
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_in:
|
|
switch (attr) {
|
|
case hwmon_in_label:
|
|
*str = "VCC";
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_power:
|
|
switch (attr) {
|
|
case hwmon_power_label:
|
|
*str = sfp_hwmon_power_labels[channel];
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static const struct hwmon_ops sfp_hwmon_ops = {
|
|
.is_visible = sfp_hwmon_is_visible,
|
|
.read = sfp_hwmon_read,
|
|
.read_string = sfp_hwmon_read_string,
|
|
};
|
|
|
|
static u32 sfp_hwmon_chip_config[] = {
|
|
HWMON_C_REGISTER_TZ,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info sfp_hwmon_chip = {
|
|
.type = hwmon_chip,
|
|
.config = sfp_hwmon_chip_config,
|
|
};
|
|
|
|
static u32 sfp_hwmon_temp_config[] = {
|
|
HWMON_T_INPUT |
|
|
HWMON_T_MAX | HWMON_T_MIN |
|
|
HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM |
|
|
HWMON_T_CRIT | HWMON_T_LCRIT |
|
|
HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM |
|
|
HWMON_T_LABEL,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info sfp_hwmon_temp_channel_info = {
|
|
.type = hwmon_temp,
|
|
.config = sfp_hwmon_temp_config,
|
|
};
|
|
|
|
static u32 sfp_hwmon_vcc_config[] = {
|
|
HWMON_I_INPUT |
|
|
HWMON_I_MAX | HWMON_I_MIN |
|
|
HWMON_I_MAX_ALARM | HWMON_I_MIN_ALARM |
|
|
HWMON_I_CRIT | HWMON_I_LCRIT |
|
|
HWMON_I_CRIT_ALARM | HWMON_I_LCRIT_ALARM |
|
|
HWMON_I_LABEL,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info sfp_hwmon_vcc_channel_info = {
|
|
.type = hwmon_in,
|
|
.config = sfp_hwmon_vcc_config,
|
|
};
|
|
|
|
static u32 sfp_hwmon_bias_config[] = {
|
|
HWMON_C_INPUT |
|
|
HWMON_C_MAX | HWMON_C_MIN |
|
|
HWMON_C_MAX_ALARM | HWMON_C_MIN_ALARM |
|
|
HWMON_C_CRIT | HWMON_C_LCRIT |
|
|
HWMON_C_CRIT_ALARM | HWMON_C_LCRIT_ALARM |
|
|
HWMON_C_LABEL,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info sfp_hwmon_bias_channel_info = {
|
|
.type = hwmon_curr,
|
|
.config = sfp_hwmon_bias_config,
|
|
};
|
|
|
|
static u32 sfp_hwmon_power_config[] = {
|
|
/* Transmit power */
|
|
HWMON_P_INPUT |
|
|
HWMON_P_MAX | HWMON_P_MIN |
|
|
HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM |
|
|
HWMON_P_CRIT | HWMON_P_LCRIT |
|
|
HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM |
|
|
HWMON_P_LABEL,
|
|
/* Receive power */
|
|
HWMON_P_INPUT |
|
|
HWMON_P_MAX | HWMON_P_MIN |
|
|
HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM |
|
|
HWMON_P_CRIT | HWMON_P_LCRIT |
|
|
HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM |
|
|
HWMON_P_LABEL,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info sfp_hwmon_power_channel_info = {
|
|
.type = hwmon_power,
|
|
.config = sfp_hwmon_power_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *sfp_hwmon_info[] = {
|
|
&sfp_hwmon_chip,
|
|
&sfp_hwmon_vcc_channel_info,
|
|
&sfp_hwmon_temp_channel_info,
|
|
&sfp_hwmon_bias_channel_info,
|
|
&sfp_hwmon_power_channel_info,
|
|
NULL,
|
|
};
|
|
|
|
static const struct hwmon_chip_info sfp_hwmon_chip_info = {
|
|
.ops = &sfp_hwmon_ops,
|
|
.info = sfp_hwmon_info,
|
|
};
|
|
|
|
static int sfp_hwmon_insert(struct sfp *sfp)
|
|
{
|
|
int err, i;
|
|
|
|
if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
|
|
return 0;
|
|
|
|
if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
|
|
return 0;
|
|
|
|
if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
|
|
/* This driver in general does not support address
|
|
* change.
|
|
*/
|
|
return 0;
|
|
|
|
err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sfp->hwmon_name = kstrdup(dev_name(sfp->dev), GFP_KERNEL);
|
|
if (!sfp->hwmon_name)
|
|
return -ENODEV;
|
|
|
|
for (i = 0; sfp->hwmon_name[i]; i++)
|
|
if (hwmon_is_bad_char(sfp->hwmon_name[i]))
|
|
sfp->hwmon_name[i] = '_';
|
|
|
|
sfp->hwmon_dev = hwmon_device_register_with_info(sfp->dev,
|
|
sfp->hwmon_name, sfp,
|
|
&sfp_hwmon_chip_info,
|
|
NULL);
|
|
|
|
return PTR_ERR_OR_ZERO(sfp->hwmon_dev);
|
|
}
|
|
|
|
static void sfp_hwmon_remove(struct sfp *sfp)
|
|
{
|
|
if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) {
|
|
hwmon_device_unregister(sfp->hwmon_dev);
|
|
sfp->hwmon_dev = NULL;
|
|
kfree(sfp->hwmon_name);
|
|
}
|
|
}
|
|
#else
|
|
static int sfp_hwmon_insert(struct sfp *sfp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void sfp_hwmon_remove(struct sfp *sfp)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/* Helpers */
|
|
static void sfp_module_tx_disable(struct sfp *sfp)
|
|
{
|
|
dev_dbg(sfp->dev, "tx disable %u -> %u\n",
|
|
sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1);
|
|
sfp->state |= SFP_F_TX_DISABLE;
|
|
sfp_set_state(sfp, sfp->state);
|
|
}
|
|
|
|
static void sfp_module_tx_enable(struct sfp *sfp)
|
|
{
|
|
dev_dbg(sfp->dev, "tx disable %u -> %u\n",
|
|
sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0);
|
|
sfp->state &= ~SFP_F_TX_DISABLE;
|
|
sfp_set_state(sfp, sfp->state);
|
|
}
|
|
|
|
static void sfp_module_tx_fault_reset(struct sfp *sfp)
|
|
{
|
|
unsigned int state = sfp->state;
|
|
|
|
if (state & SFP_F_TX_DISABLE)
|
|
return;
|
|
|
|
sfp_set_state(sfp, state | SFP_F_TX_DISABLE);
|
|
|
|
udelay(T_RESET_US);
|
|
|
|
sfp_set_state(sfp, state);
|
|
}
|
|
|
|
/* SFP state machine */
|
|
static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout)
|
|
{
|
|
if (timeout)
|
|
mod_delayed_work(system_power_efficient_wq, &sfp->timeout,
|
|
timeout);
|
|
else
|
|
cancel_delayed_work(&sfp->timeout);
|
|
}
|
|
|
|
static void sfp_sm_next(struct sfp *sfp, unsigned int state,
|
|
unsigned int timeout)
|
|
{
|
|
sfp->sm_state = state;
|
|
sfp_sm_set_timer(sfp, timeout);
|
|
}
|
|
|
|
static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state,
|
|
unsigned int timeout)
|
|
{
|
|
sfp->sm_mod_state = state;
|
|
sfp_sm_set_timer(sfp, timeout);
|
|
}
|
|
|
|
static void sfp_sm_phy_detach(struct sfp *sfp)
|
|
{
|
|
phy_stop(sfp->mod_phy);
|
|
sfp_remove_phy(sfp->sfp_bus);
|
|
phy_device_remove(sfp->mod_phy);
|
|
phy_device_free(sfp->mod_phy);
|
|
sfp->mod_phy = NULL;
|
|
}
|
|
|
|
static void sfp_sm_probe_phy(struct sfp *sfp)
|
|
{
|
|
struct phy_device *phy;
|
|
int err;
|
|
|
|
msleep(T_PHY_RESET_MS);
|
|
|
|
phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
|
|
if (phy == ERR_PTR(-ENODEV)) {
|
|
dev_info(sfp->dev, "no PHY detected\n");
|
|
return;
|
|
}
|
|
if (IS_ERR(phy)) {
|
|
dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
|
|
return;
|
|
}
|
|
|
|
err = sfp_add_phy(sfp->sfp_bus, phy);
|
|
if (err) {
|
|
phy_device_remove(phy);
|
|
phy_device_free(phy);
|
|
dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
sfp->mod_phy = phy;
|
|
phy_start(phy);
|
|
}
|
|
|
|
static void sfp_sm_link_up(struct sfp *sfp)
|
|
{
|
|
sfp_link_up(sfp->sfp_bus);
|
|
sfp_sm_next(sfp, SFP_S_LINK_UP, 0);
|
|
}
|
|
|
|
static void sfp_sm_link_down(struct sfp *sfp)
|
|
{
|
|
sfp_link_down(sfp->sfp_bus);
|
|
}
|
|
|
|
static void sfp_sm_link_check_los(struct sfp *sfp)
|
|
{
|
|
unsigned int los = sfp->state & SFP_F_LOS;
|
|
|
|
/* If neither SFP_OPTIONS_LOS_INVERTED nor SFP_OPTIONS_LOS_NORMAL
|
|
* are set, we assume that no LOS signal is available.
|
|
*/
|
|
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED))
|
|
los ^= SFP_F_LOS;
|
|
else if (!(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL)))
|
|
los = 0;
|
|
|
|
if (los)
|
|
sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
|
|
else
|
|
sfp_sm_link_up(sfp);
|
|
}
|
|
|
|
static bool sfp_los_event_active(struct sfp *sfp, unsigned int event)
|
|
{
|
|
return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) &&
|
|
event == SFP_E_LOS_LOW) ||
|
|
(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) &&
|
|
event == SFP_E_LOS_HIGH);
|
|
}
|
|
|
|
static bool sfp_los_event_inactive(struct sfp *sfp, unsigned int event)
|
|
{
|
|
return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) &&
|
|
event == SFP_E_LOS_HIGH) ||
|
|
(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) &&
|
|
event == SFP_E_LOS_LOW);
|
|
}
|
|
|
|
static void sfp_sm_fault(struct sfp *sfp, bool warn)
|
|
{
|
|
if (sfp->sm_retries && !--sfp->sm_retries) {
|
|
dev_err(sfp->dev,
|
|
"module persistently indicates fault, disabling\n");
|
|
sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
|
|
} else {
|
|
if (warn)
|
|
dev_err(sfp->dev, "module transmit fault indicated\n");
|
|
|
|
sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER);
|
|
}
|
|
}
|
|
|
|
static void sfp_sm_mod_init(struct sfp *sfp)
|
|
{
|
|
sfp_module_tx_enable(sfp);
|
|
|
|
/* Wait t_init before indicating that the link is up, provided the
|
|
* current state indicates no TX_FAULT. If TX_FAULT clears before
|
|
* this time, that's fine too.
|
|
*/
|
|
sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
|
|
sfp->sm_retries = 5;
|
|
|
|
/* Setting the serdes link mode is guesswork: there's no
|
|
* field in the EEPROM which indicates what mode should
|
|
* be used.
|
|
*
|
|
* If it's a gigabit-only fiber module, it probably does
|
|
* not have a PHY, so switch to 802.3z negotiation mode.
|
|
* Otherwise, switch to SGMII mode (which is required to
|
|
* support non-gigabit speeds) and probe for a PHY.
|
|
*/
|
|
if (sfp->id.base.e1000_base_t ||
|
|
sfp->id.base.e100_base_lx ||
|
|
sfp->id.base.e100_base_fx)
|
|
sfp_sm_probe_phy(sfp);
|
|
}
|
|
|
|
static int sfp_sm_mod_hpower(struct sfp *sfp)
|
|
{
|
|
u32 power;
|
|
u8 val;
|
|
int err;
|
|
|
|
power = 1000;
|
|
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL))
|
|
power = 1500;
|
|
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
|
|
power = 2000;
|
|
|
|
if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
|
|
(sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
|
|
SFP_DIAGMON_DDM) {
|
|
/* The module appears not to implement bus address 0xa2,
|
|
* or requires an address change sequence, so assume that
|
|
* the module powers up in the indicated power mode.
|
|
*/
|
|
if (power > sfp->max_power_mW) {
|
|
dev_err(sfp->dev,
|
|
"Host does not support %u.%uW modules\n",
|
|
power / 1000, (power / 100) % 10);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (power > sfp->max_power_mW) {
|
|
dev_warn(sfp->dev,
|
|
"Host does not support %u.%uW modules, module left in power mode 1\n",
|
|
power / 1000, (power / 100) % 10);
|
|
return 0;
|
|
}
|
|
|
|
if (power <= 1000)
|
|
return 0;
|
|
|
|
err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
|
|
if (err != sizeof(val)) {
|
|
dev_err(sfp->dev, "Failed to read EEPROM: %d\n", err);
|
|
err = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
val |= BIT(0);
|
|
|
|
err = sfp_write(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
|
|
if (err != sizeof(val)) {
|
|
dev_err(sfp->dev, "Failed to write EEPROM: %d\n", err);
|
|
err = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
|
|
power / 1000, (power / 100) % 10);
|
|
return T_HPOWER_LEVEL;
|
|
|
|
err:
|
|
return err;
|
|
}
|
|
|
|
static int sfp_sm_mod_probe(struct sfp *sfp)
|
|
{
|
|
/* SFP module inserted - read I2C data */
|
|
struct sfp_eeprom_id id;
|
|
bool cotsworks;
|
|
u8 check;
|
|
int ret;
|
|
|
|
ret = sfp_read(sfp, false, 0, &id, sizeof(id));
|
|
if (ret < 0) {
|
|
dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (ret != sizeof(id)) {
|
|
dev_err(sfp->dev, "EEPROM short read: %d\n", ret);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Cotsworks do not seem to update the checksums when they
|
|
* do the final programming with the final module part number,
|
|
* serial number and date code.
|
|
*/
|
|
cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16);
|
|
|
|
/* Validate the checksum over the base structure */
|
|
check = sfp_check(&id.base, sizeof(id.base) - 1);
|
|
if (check != id.base.cc_base) {
|
|
if (cotsworks) {
|
|
dev_warn(sfp->dev,
|
|
"EEPROM base structure checksum failure (0x%02x != 0x%02x)\n",
|
|
check, id.base.cc_base);
|
|
} else {
|
|
dev_err(sfp->dev,
|
|
"EEPROM base structure checksum failure: 0x%02x != 0x%02x\n",
|
|
check, id.base.cc_base);
|
|
print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET,
|
|
16, 1, &id, sizeof(id), true);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
check = sfp_check(&id.ext, sizeof(id.ext) - 1);
|
|
if (check != id.ext.cc_ext) {
|
|
if (cotsworks) {
|
|
dev_warn(sfp->dev,
|
|
"EEPROM extended structure checksum failure (0x%02x != 0x%02x)\n",
|
|
check, id.ext.cc_ext);
|
|
} else {
|
|
dev_err(sfp->dev,
|
|
"EEPROM extended structure checksum failure: 0x%02x != 0x%02x\n",
|
|
check, id.ext.cc_ext);
|
|
print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET,
|
|
16, 1, &id, sizeof(id), true);
|
|
memset(&id.ext, 0, sizeof(id.ext));
|
|
}
|
|
}
|
|
|
|
sfp->id = id;
|
|
|
|
dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n",
|
|
(int)sizeof(id.base.vendor_name), id.base.vendor_name,
|
|
(int)sizeof(id.base.vendor_pn), id.base.vendor_pn,
|
|
(int)sizeof(id.base.vendor_rev), id.base.vendor_rev,
|
|
(int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn,
|
|
(int)sizeof(id.ext.datecode), id.ext.datecode);
|
|
|
|
/* Check whether we support this module */
|
|
if (!sfp->type->module_supported(&sfp->id)) {
|
|
dev_err(sfp->dev,
|
|
"module is not supported - phys id 0x%02x 0x%02x\n",
|
|
sfp->id.base.phys_id, sfp->id.base.phys_ext_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If the module requires address swap mode, warn about it */
|
|
if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
|
|
dev_warn(sfp->dev,
|
|
"module address swap to access page 0xA2 is not supported.\n");
|
|
|
|
ret = sfp_hwmon_insert(sfp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = sfp_module_insert(sfp->sfp_bus, &sfp->id);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sfp_sm_mod_hpower(sfp);
|
|
}
|
|
|
|
static void sfp_sm_mod_remove(struct sfp *sfp)
|
|
{
|
|
sfp_module_remove(sfp->sfp_bus);
|
|
|
|
sfp_hwmon_remove(sfp);
|
|
|
|
if (sfp->mod_phy)
|
|
sfp_sm_phy_detach(sfp);
|
|
|
|
sfp_module_tx_disable(sfp);
|
|
|
|
memset(&sfp->id, 0, sizeof(sfp->id));
|
|
|
|
dev_info(sfp->dev, "module removed\n");
|
|
}
|
|
|
|
static void sfp_sm_event(struct sfp *sfp, unsigned int event)
|
|
{
|
|
mutex_lock(&sfp->sm_mutex);
|
|
|
|
dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
|
|
mod_state_to_str(sfp->sm_mod_state),
|
|
dev_state_to_str(sfp->sm_dev_state),
|
|
sm_state_to_str(sfp->sm_state),
|
|
event_to_str(event));
|
|
|
|
/* This state machine tracks the insert/remove state of
|
|
* the module, and handles probing the on-board EEPROM.
|
|
*/
|
|
switch (sfp->sm_mod_state) {
|
|
default:
|
|
if (event == SFP_E_INSERT && sfp->attached) {
|
|
sfp_module_tx_disable(sfp);
|
|
sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
|
|
}
|
|
break;
|
|
|
|
case SFP_MOD_PROBE:
|
|
if (event == SFP_E_REMOVE) {
|
|
sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
|
|
} else if (event == SFP_E_TIMEOUT) {
|
|
int val = sfp_sm_mod_probe(sfp);
|
|
|
|
if (val == 0)
|
|
sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
|
|
else if (val > 0)
|
|
sfp_sm_ins_next(sfp, SFP_MOD_HPOWER, val);
|
|
else if (val != -EAGAIN)
|
|
sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0);
|
|
else
|
|
sfp_sm_set_timer(sfp, T_PROBE_RETRY);
|
|
}
|
|
break;
|
|
|
|
case SFP_MOD_HPOWER:
|
|
if (event == SFP_E_TIMEOUT) {
|
|
sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case SFP_MOD_PRESENT:
|
|
case SFP_MOD_ERROR:
|
|
if (event == SFP_E_REMOVE) {
|
|
sfp_sm_mod_remove(sfp);
|
|
sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* This state machine tracks the netdev up/down state */
|
|
switch (sfp->sm_dev_state) {
|
|
default:
|
|
if (event == SFP_E_DEV_UP)
|
|
sfp->sm_dev_state = SFP_DEV_UP;
|
|
break;
|
|
|
|
case SFP_DEV_UP:
|
|
if (event == SFP_E_DEV_DOWN) {
|
|
/* If the module has a PHY, avoid raising TX disable
|
|
* as this resets the PHY. Otherwise, raise it to
|
|
* turn the laser off.
|
|
*/
|
|
if (!sfp->mod_phy)
|
|
sfp_module_tx_disable(sfp);
|
|
sfp->sm_dev_state = SFP_DEV_DOWN;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Some events are global */
|
|
if (sfp->sm_state != SFP_S_DOWN &&
|
|
(sfp->sm_mod_state != SFP_MOD_PRESENT ||
|
|
sfp->sm_dev_state != SFP_DEV_UP)) {
|
|
if (sfp->sm_state == SFP_S_LINK_UP &&
|
|
sfp->sm_dev_state == SFP_DEV_UP)
|
|
sfp_sm_link_down(sfp);
|
|
if (sfp->mod_phy)
|
|
sfp_sm_phy_detach(sfp);
|
|
sfp_sm_next(sfp, SFP_S_DOWN, 0);
|
|
mutex_unlock(&sfp->sm_mutex);
|
|
return;
|
|
}
|
|
|
|
/* The main state machine */
|
|
switch (sfp->sm_state) {
|
|
case SFP_S_DOWN:
|
|
if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
|
|
sfp->sm_dev_state == SFP_DEV_UP)
|
|
sfp_sm_mod_init(sfp);
|
|
break;
|
|
|
|
case SFP_S_INIT:
|
|
if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
|
|
sfp_sm_fault(sfp, true);
|
|
else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
|
|
sfp_sm_link_check_los(sfp);
|
|
break;
|
|
|
|
case SFP_S_WAIT_LOS:
|
|
if (event == SFP_E_TX_FAULT)
|
|
sfp_sm_fault(sfp, true);
|
|
else if (sfp_los_event_inactive(sfp, event))
|
|
sfp_sm_link_up(sfp);
|
|
break;
|
|
|
|
case SFP_S_LINK_UP:
|
|
if (event == SFP_E_TX_FAULT) {
|
|
sfp_sm_link_down(sfp);
|
|
sfp_sm_fault(sfp, true);
|
|
} else if (sfp_los_event_active(sfp, event)) {
|
|
sfp_sm_link_down(sfp);
|
|
sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
|
|
}
|
|
break;
|
|
|
|
case SFP_S_TX_FAULT:
|
|
if (event == SFP_E_TIMEOUT) {
|
|
sfp_module_tx_fault_reset(sfp);
|
|
sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
|
|
}
|
|
break;
|
|
|
|
case SFP_S_REINIT:
|
|
if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
|
|
sfp_sm_fault(sfp, false);
|
|
} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
|
|
dev_info(sfp->dev, "module transmit fault recovered\n");
|
|
sfp_sm_link_check_los(sfp);
|
|
}
|
|
break;
|
|
|
|
case SFP_S_TX_DISABLE:
|
|
break;
|
|
}
|
|
|
|
dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
|
|
mod_state_to_str(sfp->sm_mod_state),
|
|
dev_state_to_str(sfp->sm_dev_state),
|
|
sm_state_to_str(sfp->sm_state));
|
|
|
|
mutex_unlock(&sfp->sm_mutex);
|
|
}
|
|
|
|
static void sfp_attach(struct sfp *sfp)
|
|
{
|
|
sfp->attached = true;
|
|
if (sfp->state & SFP_F_PRESENT)
|
|
sfp_sm_event(sfp, SFP_E_INSERT);
|
|
}
|
|
|
|
static void sfp_detach(struct sfp *sfp)
|
|
{
|
|
sfp->attached = false;
|
|
sfp_sm_event(sfp, SFP_E_REMOVE);
|
|
}
|
|
|
|
static void sfp_start(struct sfp *sfp)
|
|
{
|
|
sfp_sm_event(sfp, SFP_E_DEV_UP);
|
|
}
|
|
|
|
static void sfp_stop(struct sfp *sfp)
|
|
{
|
|
sfp_sm_event(sfp, SFP_E_DEV_DOWN);
|
|
}
|
|
|
|
static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo)
|
|
{
|
|
/* locking... and check module is present */
|
|
|
|
if (sfp->id.ext.sff8472_compliance &&
|
|
!(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)) {
|
|
modinfo->type = ETH_MODULE_SFF_8472;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
|
|
} else {
|
|
modinfo->type = ETH_MODULE_SFF_8079;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee,
|
|
u8 *data)
|
|
{
|
|
unsigned int first, last, len;
|
|
int ret;
|
|
|
|
if (ee->len == 0)
|
|
return -EINVAL;
|
|
|
|
first = ee->offset;
|
|
last = ee->offset + ee->len;
|
|
if (first < ETH_MODULE_SFF_8079_LEN) {
|
|
len = min_t(unsigned int, last, ETH_MODULE_SFF_8079_LEN);
|
|
len -= first;
|
|
|
|
ret = sfp_read(sfp, false, first, data, len);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
first += len;
|
|
data += len;
|
|
}
|
|
if (first < ETH_MODULE_SFF_8472_LEN && last > ETH_MODULE_SFF_8079_LEN) {
|
|
len = min_t(unsigned int, last, ETH_MODULE_SFF_8472_LEN);
|
|
len -= first;
|
|
first -= ETH_MODULE_SFF_8079_LEN;
|
|
|
|
ret = sfp_read(sfp, true, first, data, len);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct sfp_socket_ops sfp_module_ops = {
|
|
.attach = sfp_attach,
|
|
.detach = sfp_detach,
|
|
.start = sfp_start,
|
|
.stop = sfp_stop,
|
|
.module_info = sfp_module_info,
|
|
.module_eeprom = sfp_module_eeprom,
|
|
};
|
|
|
|
static void sfp_timeout(struct work_struct *work)
|
|
{
|
|
struct sfp *sfp = container_of(work, struct sfp, timeout.work);
|
|
|
|
rtnl_lock();
|
|
sfp_sm_event(sfp, SFP_E_TIMEOUT);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static void sfp_check_state(struct sfp *sfp)
|
|
{
|
|
unsigned int state, i, changed;
|
|
|
|
mutex_lock(&sfp->st_mutex);
|
|
state = sfp_get_state(sfp);
|
|
changed = state ^ sfp->state;
|
|
changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
|
|
|
|
for (i = 0; i < GPIO_MAX; i++)
|
|
if (changed & BIT(i))
|
|
dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_of_names[i],
|
|
!!(sfp->state & BIT(i)), !!(state & BIT(i)));
|
|
|
|
state |= sfp->state & (SFP_F_TX_DISABLE | SFP_F_RATE_SELECT);
|
|
sfp->state = state;
|
|
|
|
rtnl_lock();
|
|
if (changed & SFP_F_PRESENT)
|
|
sfp_sm_event(sfp, state & SFP_F_PRESENT ?
|
|
SFP_E_INSERT : SFP_E_REMOVE);
|
|
|
|
if (changed & SFP_F_TX_FAULT)
|
|
sfp_sm_event(sfp, state & SFP_F_TX_FAULT ?
|
|
SFP_E_TX_FAULT : SFP_E_TX_CLEAR);
|
|
|
|
if (changed & SFP_F_LOS)
|
|
sfp_sm_event(sfp, state & SFP_F_LOS ?
|
|
SFP_E_LOS_HIGH : SFP_E_LOS_LOW);
|
|
rtnl_unlock();
|
|
mutex_unlock(&sfp->st_mutex);
|
|
}
|
|
|
|
static irqreturn_t sfp_irq(int irq, void *data)
|
|
{
|
|
struct sfp *sfp = data;
|
|
|
|
sfp_check_state(sfp);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sfp_poll(struct work_struct *work)
|
|
{
|
|
struct sfp *sfp = container_of(work, struct sfp, poll.work);
|
|
|
|
sfp_check_state(sfp);
|
|
mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
|
|
}
|
|
|
|
static struct sfp *sfp_alloc(struct device *dev)
|
|
{
|
|
struct sfp *sfp;
|
|
|
|
sfp = kzalloc(sizeof(*sfp), GFP_KERNEL);
|
|
if (!sfp)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
sfp->dev = dev;
|
|
|
|
mutex_init(&sfp->sm_mutex);
|
|
mutex_init(&sfp->st_mutex);
|
|
INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
|
|
INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
|
|
|
|
return sfp;
|
|
}
|
|
|
|
static void sfp_cleanup(void *data)
|
|
{
|
|
struct sfp *sfp = data;
|
|
|
|
cancel_delayed_work_sync(&sfp->poll);
|
|
cancel_delayed_work_sync(&sfp->timeout);
|
|
if (sfp->i2c_mii) {
|
|
mdiobus_unregister(sfp->i2c_mii);
|
|
mdiobus_free(sfp->i2c_mii);
|
|
}
|
|
if (sfp->i2c)
|
|
i2c_put_adapter(sfp->i2c);
|
|
kfree(sfp);
|
|
}
|
|
|
|
static int sfp_probe(struct platform_device *pdev)
|
|
{
|
|
const struct sff_data *sff;
|
|
struct i2c_adapter *i2c;
|
|
struct sfp *sfp;
|
|
bool poll = false;
|
|
int err, i;
|
|
|
|
sfp = sfp_alloc(&pdev->dev);
|
|
if (IS_ERR(sfp))
|
|
return PTR_ERR(sfp);
|
|
|
|
platform_set_drvdata(pdev, sfp);
|
|
|
|
err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
sff = sfp->type = &sfp_data;
|
|
|
|
if (pdev->dev.of_node) {
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const struct of_device_id *id;
|
|
struct device_node *np;
|
|
|
|
id = of_match_node(sfp_of_match, node);
|
|
if (WARN_ON(!id))
|
|
return -EINVAL;
|
|
|
|
sff = sfp->type = id->data;
|
|
|
|
np = of_parse_phandle(node, "i2c-bus", 0);
|
|
if (!np) {
|
|
dev_err(sfp->dev, "missing 'i2c-bus' property\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
i2c = of_find_i2c_adapter_by_node(np);
|
|
of_node_put(np);
|
|
} else if (has_acpi_companion(&pdev->dev)) {
|
|
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
|
|
struct fwnode_handle *fw = acpi_fwnode_handle(adev);
|
|
struct fwnode_reference_args args;
|
|
struct acpi_handle *acpi_handle;
|
|
int ret;
|
|
|
|
ret = acpi_node_get_property_reference(fw, "i2c-bus", 0, &args);
|
|
if (ret || !is_acpi_device_node(args.fwnode)) {
|
|
dev_err(&pdev->dev, "missing 'i2c-bus' property\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
acpi_handle = ACPI_HANDLE_FWNODE(args.fwnode);
|
|
i2c = i2c_acpi_find_adapter_by_handle(acpi_handle);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c)
|
|
return -EPROBE_DEFER;
|
|
|
|
err = sfp_i2c_configure(sfp, i2c);
|
|
if (err < 0) {
|
|
i2c_put_adapter(i2c);
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i < GPIO_MAX; i++)
|
|
if (sff->gpios & BIT(i)) {
|
|
sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev,
|
|
gpio_of_names[i], gpio_flags[i]);
|
|
if (IS_ERR(sfp->gpio[i]))
|
|
return PTR_ERR(sfp->gpio[i]);
|
|
}
|
|
|
|
sfp->get_state = sfp_gpio_get_state;
|
|
sfp->set_state = sfp_gpio_set_state;
|
|
|
|
/* Modules that have no detect signal are always present */
|
|
if (!(sfp->gpio[GPIO_MODDEF0]))
|
|
sfp->get_state = sff_gpio_get_state;
|
|
|
|
device_property_read_u32(&pdev->dev, "maximum-power-milliwatt",
|
|
&sfp->max_power_mW);
|
|
if (!sfp->max_power_mW)
|
|
sfp->max_power_mW = 1000;
|
|
|
|
dev_info(sfp->dev, "Host maximum power %u.%uW\n",
|
|
sfp->max_power_mW / 1000, (sfp->max_power_mW / 100) % 10);
|
|
|
|
/* Get the initial state, and always signal TX disable,
|
|
* since the network interface will not be up.
|
|
*/
|
|
sfp->state = sfp_get_state(sfp) | SFP_F_TX_DISABLE;
|
|
|
|
if (sfp->gpio[GPIO_RATE_SELECT] &&
|
|
gpiod_get_value_cansleep(sfp->gpio[GPIO_RATE_SELECT]))
|
|
sfp->state |= SFP_F_RATE_SELECT;
|
|
sfp_set_state(sfp, sfp->state);
|
|
sfp_module_tx_disable(sfp);
|
|
|
|
for (i = 0; i < GPIO_MAX; i++) {
|
|
if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
|
|
continue;
|
|
|
|
sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
|
|
if (!sfp->gpio_irq[i]) {
|
|
poll = true;
|
|
continue;
|
|
}
|
|
|
|
err = devm_request_threaded_irq(sfp->dev, sfp->gpio_irq[i],
|
|
NULL, sfp_irq,
|
|
IRQF_ONESHOT |
|
|
IRQF_TRIGGER_RISING |
|
|
IRQF_TRIGGER_FALLING,
|
|
dev_name(sfp->dev), sfp);
|
|
if (err) {
|
|
sfp->gpio_irq[i] = 0;
|
|
poll = true;
|
|
}
|
|
}
|
|
|
|
if (poll)
|
|
mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
|
|
|
|
/* We could have an issue in cases no Tx disable pin is available or
|
|
* wired as modules using a laser as their light source will continue to
|
|
* be active when the fiber is removed. This could be a safety issue and
|
|
* we should at least warn the user about that.
|
|
*/
|
|
if (!sfp->gpio[GPIO_TX_DISABLE])
|
|
dev_warn(sfp->dev,
|
|
"No tx_disable pin: SFP modules will always be emitting.\n");
|
|
|
|
sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops);
|
|
if (!sfp->sfp_bus)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sfp_remove(struct platform_device *pdev)
|
|
{
|
|
struct sfp *sfp = platform_get_drvdata(pdev);
|
|
|
|
sfp_unregister_socket(sfp->sfp_bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sfp_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct sfp *sfp = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < GPIO_MAX; i++) {
|
|
if (!sfp->gpio_irq[i])
|
|
continue;
|
|
|
|
devm_free_irq(sfp->dev, sfp->gpio_irq[i], sfp);
|
|
}
|
|
|
|
cancel_delayed_work_sync(&sfp->poll);
|
|
cancel_delayed_work_sync(&sfp->timeout);
|
|
}
|
|
|
|
static struct platform_driver sfp_driver = {
|
|
.probe = sfp_probe,
|
|
.remove = sfp_remove,
|
|
.shutdown = sfp_shutdown,
|
|
.driver = {
|
|
.name = "sfp",
|
|
.of_match_table = sfp_of_match,
|
|
},
|
|
};
|
|
|
|
static int sfp_init(void)
|
|
{
|
|
poll_jiffies = msecs_to_jiffies(100);
|
|
|
|
return platform_driver_register(&sfp_driver);
|
|
}
|
|
module_init(sfp_init);
|
|
|
|
static void sfp_exit(void)
|
|
{
|
|
platform_driver_unregister(&sfp_driver);
|
|
}
|
|
module_exit(sfp_exit);
|
|
|
|
MODULE_ALIAS("platform:sfp");
|
|
MODULE_AUTHOR("Russell King");
|
|
MODULE_LICENSE("GPL v2");
|