237 lines
4.8 KiB
Plaintext
237 lines
4.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include "msm8916.dtsi"
|
|
#include "pm8916.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
soc {
|
|
sdhci@7824000 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8916_l8>;
|
|
vqmmc-supply = <&pm8916_l5>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
|
|
};
|
|
|
|
sdhci@7864000 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8916_l11>;
|
|
vqmmc-supply = <&pm8916_l12>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
|
|
|
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
serial@78b0000 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&blsp1_uart2_default>;
|
|
pinctrl-1 = <&blsp1_uart2_sleep>;
|
|
};
|
|
|
|
usb@78d9000 {
|
|
status = "okay";
|
|
extcon = <&muic>, <&muic>;
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy {
|
|
extcon = <&muic>;
|
|
v1p8-supply = <&pm8916_l7>;
|
|
v3p3-supply = <&pm8916_l13>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Attempting to enable these devices causes a "synchronous
|
|
* external abort". Suspected cause is that the debug power
|
|
* domain is not enabled by default on this device.
|
|
* Disable these devices for now to avoid the crash.
|
|
*
|
|
* See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/
|
|
*/
|
|
tpiu@820000 { status = "disabled"; };
|
|
funnel@821000 { status = "disabled"; };
|
|
replicator@824000 { status = "disabled"; };
|
|
etf@825000 { status = "disabled"; };
|
|
etr@826000 { status = "disabled"; };
|
|
funnel@841000 { status = "disabled"; };
|
|
debug@850000 { status = "disabled"; };
|
|
debug@852000 { status = "disabled"; };
|
|
debug@854000 { status = "disabled"; };
|
|
debug@856000 { status = "disabled"; };
|
|
etm@85c000 { status = "disabled"; };
|
|
etm@85d000 { status = "disabled"; };
|
|
etm@85e000 { status = "disabled"; };
|
|
etm@85f000 { status = "disabled"; };
|
|
};
|
|
|
|
i2c-muic {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
muic: sm5502@25 {
|
|
compatible = "siliconmitus,sm5502-muic";
|
|
|
|
reg = <0x25>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&muic_int_default>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&msmgpio {
|
|
muic_int_default: muic_int_default {
|
|
pinmux {
|
|
function = "gpio";
|
|
pins = "gpio12";
|
|
};
|
|
pinconf {
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&smd_rpm_regulators {
|
|
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
|
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
|
vdd_l7-supply = <&pm8916_s4>;
|
|
|
|
s1 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1287500>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l10 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
};
|