86 lines
3.3 KiB
Plaintext
86 lines
3.3 KiB
Plaintext
* Freescale QorIQ 1588 timer based PTP clock
|
|
|
|
General Properties:
|
|
|
|
- compatible Should be "fsl,etsec-ptp" for eTSEC
|
|
Should be "fsl,fman-ptp-timer" for DPAA FMan
|
|
Should be "fsl,dpaa2-ptp" for DPAA2
|
|
Should be "fsl,enetc-ptp" for ENETC
|
|
- reg Offset and length of the register set for the device
|
|
- interrupts There should be at least two interrupts. Some devices
|
|
have as many as four PTP related interrupts.
|
|
|
|
Clock Properties:
|
|
|
|
- fsl,cksel Timer reference clock source.
|
|
- fsl,tclk-period Timer reference clock period in nanoseconds.
|
|
- fsl,tmr-prsc Prescaler, divides the output clock.
|
|
- fsl,tmr-add Frequency compensation value.
|
|
- fsl,tmr-fiper1 Fixed interval period pulse generator.
|
|
- fsl,tmr-fiper2 Fixed interval period pulse generator.
|
|
- fsl,max-adj Maximum frequency adjustment in parts per billion.
|
|
- fsl,extts-fifo The presence of this property indicates hardware
|
|
support for the external trigger stamp FIFO.
|
|
- little-endian The presence of this property indicates the 1588 timer
|
|
IP block is little-endian mode. The default endian mode
|
|
is big-endian.
|
|
|
|
These properties set the operational parameters for the PTP
|
|
clock. You must choose these carefully for the clock to work right.
|
|
Here is how to figure good values:
|
|
|
|
TimerOsc = selected reference clock MHz
|
|
tclk_period = desired clock period nanoseconds
|
|
NominalFreq = 1000 / tclk_period MHz
|
|
FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
|
|
tmr_add = ceil(2^32 / FreqDivRatio)
|
|
OutputClock = NominalFreq / tmr_prsc MHz
|
|
PulseWidth = 1 / OutputClock microseconds
|
|
FiperFreq1 = desired frequency in Hz
|
|
FiperDiv1 = 1000000 * OutputClock / FiperFreq1
|
|
tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
|
|
max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
|
|
|
|
The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
|
|
driver expects that tmr_fiper1 will be correctly set to produce a 1
|
|
Pulse Per Second (PPS) signal, since this will be offered to the PPS
|
|
subsystem to synchronize the Linux clock.
|
|
|
|
Reference clock source is determined by the value, which is holded
|
|
in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
|
|
value, which will be directly written in those bits, that is why,
|
|
according to reference manual, the next clock sources can be used:
|
|
|
|
For eTSEC,
|
|
<0> - external high precision timer reference clock (TSEC_TMR_CLK
|
|
input is used for this purpose);
|
|
<1> - eTSEC system clock;
|
|
<2> - eTSEC1 transmit clock;
|
|
<3> - RTC clock input.
|
|
|
|
For DPAA FMan,
|
|
<0> - external high precision timer reference clock (TMR_1588_CLK)
|
|
<1> - MAC system clock (1/2 FMan clock)
|
|
<2> - reserved
|
|
<3> - RTC clock oscillator
|
|
|
|
When this attribute is not used, the IEEE 1588 timer reference clock
|
|
will use the eTSEC system clock (for Gianfar) or the MAC system
|
|
clock (for DPAA).
|
|
|
|
Example:
|
|
|
|
ptp_clock@24e00 {
|
|
compatible = "fsl,etsec-ptp";
|
|
reg = <0x24E00 0xB0>;
|
|
interrupts = <12 0x8 13 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,cksel = <1>;
|
|
fsl,tclk-period = <10>;
|
|
fsl,tmr-prsc = <100>;
|
|
fsl,tmr-add = <0x999999A4>;
|
|
fsl,tmr-fiper1 = <0x3B9AC9F6>;
|
|
fsl,tmr-fiper2 = <0x00018696>;
|
|
fsl,max-adj = <659999998>;
|
|
};
|