linux/linux-5.4.31/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt

144 lines
2.8 KiB
Plaintext

Lantiq GSWIP Ethernet switches
==================================
Required properties for GSWIP core:
- compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the
xRX200 SoC
- reg : memory range of the GSWIP core registers
: memory range of the GSWIP MDIO registers
: memory range of the GSWIP MII registers
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of
additional required and optional properties.
Required properties for MDIO bus:
- compatible : "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP
core of the xRX200 SoC and the PHYs connected to it.
See Documentation/devicetree/bindings/net/mdio.txt for a list of additional
required and optional properties.
Required properties for GPHY firmware loading:
- compatible : "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
"lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
"lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
for the loading of the firmware into the embedded
GPHY core of the SoC.
- lantiq,rcu : reference to the rcu syscon
The GPHY firmware loader has a list of GPHY entries, one for each
embedded GPHY
- reg : Offset of the GPHY firmware register in the RCU
register range
- resets : list of resets of the embedded GPHY
- reset-names : list of names of the resets
Example:
Ethernet switch on the VRX200 SoC:
switch@e108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-gswip";
reg = < 0xe108000 0x3100 /* switch */
0xe10b100 0xd8 /* mdio */
0xe10b1d8 0x130 /* mii */
>;
dsa,member = <0 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan3";
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy11>;
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy13>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
port@6 {
reg = <0x6>;
label = "cpu";
ethernet = <&eth0>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
reg = <0>;
phy0: ethernet-phy@0 {
reg = <0x0>;
};
phy1: ethernet-phy@1 {
reg = <0x1>;
};
phy5: ethernet-phy@5 {
reg = <0x5>;
};
phy11: ethernet-phy@11 {
reg = <0x11>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
};
};
gphy-fw {
compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
lantiq,rcu = <&rcu0>;
#address-cells = <1>;
#size-cells = <0>;
gphy@20 {
reg = <0x20>;
resets = <&reset0 31 30>;
reset-names = "gphy";
};
gphy@68 {
reg = <0x68>;
resets = <&reset0 29 28>;
reset-names = "gphy";
};
};
};