130 lines
2.6 KiB
Plaintext
130 lines
2.6 KiB
Plaintext
Generic register bitfield-based multiplexer controller bindings
|
|
|
|
Define register bitfields to be used to control multiplexers. The parent
|
|
device tree node must be a device node to provide register r/w access.
|
|
|
|
Required properties:
|
|
- compatible : should be one of
|
|
"reg-mux" : if parent device of mux controller is not syscon device
|
|
"mmio-mux" : if parent device of mux controller is syscon device
|
|
- #mux-control-cells : <1>
|
|
- mux-reg-masks : an array of register offset and pre-shifted bitfield mask
|
|
pairs, each describing a single mux control.
|
|
* Standard mux-controller bindings as decribed in mux-controller.txt
|
|
|
|
Optional properties:
|
|
- idle-states : if present, the state the muxes will have when idle. The
|
|
special state MUX_IDLE_AS_IS is the default.
|
|
|
|
The multiplexer state of each multiplexer is defined as the value of the
|
|
bitfield described by the corresponding register offset and bitfield mask
|
|
pair in the mux-reg-masks array.
|
|
|
|
Example 1:
|
|
The parent device of mux controller is not a syscon device.
|
|
|
|
&i2c0 {
|
|
fpga@66 { // fpga connected to i2c
|
|
compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
|
|
"simple-mfd";
|
|
reg = <0x66>;
|
|
|
|
mux: mux-controller {
|
|
compatible = "reg-mux";
|
|
#mux-control-cells = <1>;
|
|
mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
|
|
<0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio-mux-1 {
|
|
compatible = "mdio-mux-multiplexer";
|
|
mux-controls = <&mux 0>;
|
|
mdio-parent-bus = <&emdio1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio@0 {
|
|
reg = <0x0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mdio@8 {
|
|
reg = <0x8>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
..
|
|
..
|
|
};
|
|
|
|
mdio-mux-2 {
|
|
compatible = "mdio-mux-multiplexer";
|
|
mux-controls = <&mux 1>;
|
|
mdio-parent-bus = <&emdio2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio@0 {
|
|
reg = <0x0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mdio@1 {
|
|
reg = <0x1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
..
|
|
..
|
|
};
|
|
|
|
Example 2:
|
|
The parent device of mux controller is syscon device.
|
|
|
|
syscon {
|
|
compatible = "syscon";
|
|
|
|
mux: mux-controller {
|
|
compatible = "mmio-mux";
|
|
#mux-control-cells = <1>;
|
|
|
|
mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
|
|
<0x3 0x40>, /* 1: reg 0x3, bit 6 */
|
|
idle-states = <MUX_IDLE_AS_IS>, <0>;
|
|
};
|
|
};
|
|
|
|
video-mux {
|
|
compatible = "video-mux";
|
|
mux-controls = <&mux 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
/* inputs 0..3 */
|
|
port@0 {
|
|
reg = <0>;
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
};
|
|
port@3 {
|
|
reg = <3>;
|
|
};
|
|
|
|
/* output */
|
|
port@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
};
|