145 lines
4.4 KiB
YAML
145 lines
4.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NAND Chip and NAND Controller Generic Binding
|
|
|
|
maintainers:
|
|
- Miquel Raynal <miquel.raynal@bootlin.com>
|
|
- Richard Weinberger <richard@nod.at>
|
|
|
|
description: |
|
|
The NAND controller should be represented with its own DT node, and
|
|
all NAND chips attached to this controller should be defined as
|
|
children nodes of the NAND controller. This representation should be
|
|
enforced even for simple controllers supporting only one chip.
|
|
|
|
The ECC strength and ECC step size properties define the user
|
|
desires in terms of correction capability of a controller. Together,
|
|
they request the ECC engine to correct {strength} bit errors per
|
|
{size} bytes.
|
|
|
|
The interpretation of these parameters is implementation-defined, so
|
|
not all implementations must support all possible
|
|
combinations. However, implementations are encouraged to further
|
|
specify the value(s) they support.
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^nand-controller(@.*)?"
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
ranges: true
|
|
|
|
patternProperties:
|
|
"^nand@[a-f0-9]$":
|
|
type: object
|
|
properties:
|
|
reg:
|
|
description:
|
|
Contains the native Ready/Busy IDs.
|
|
|
|
nand-ecc-mode:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/string
|
|
- enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
|
|
description:
|
|
Desired ECC engine, either hardware (most of the time
|
|
embedded in the NAND controller) or software correction
|
|
(Linux will handle the calculations). soft_bch is deprecated
|
|
and should be replaced by soft and nand-ecc-algo.
|
|
|
|
nand-ecc-algo:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/string
|
|
- enum: [ hamming, bch, rs ]
|
|
description:
|
|
Desired ECC algorithm.
|
|
|
|
nand-bus-width:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- enum: [ 8, 16 ]
|
|
- default: 8
|
|
description:
|
|
Bus width to the NAND chip
|
|
|
|
nand-on-flash-bbt:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
With this property, the OS will search the device for a Bad
|
|
Block Table (BBT). If not found, it will create one, reserve
|
|
a few blocks at the end of the device to store it and update
|
|
it as the device ages. Otherwise, the out-of-band area of a
|
|
few pages of all the blocks will be scanned at boot time to
|
|
find Bad Block Markers (BBM). These markers will help to
|
|
build a volatile BBT in RAM.
|
|
|
|
nand-ecc-strength:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- minimum: 1
|
|
description:
|
|
Maximum number of bits that can be corrected per ECC step.
|
|
|
|
nand-ecc-step-size:
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
- minimum: 1
|
|
description:
|
|
Number of data bytes covered by a single ECC step.
|
|
|
|
nand-ecc-maximize:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Whether or not the ECC strength should be maximized. The
|
|
maximum ECC strength is both controller and chip
|
|
dependent. The ECC engine has to select the ECC config
|
|
providing the best strength and taking the OOB area size
|
|
constraint into account. This is particularly useful when
|
|
only the in-band area is used by the upper layers, and you
|
|
want to make your NAND as reliable as possible.
|
|
|
|
nand-is-boot-medium:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Whether or not the NAND chip is a boot medium. Drivers might
|
|
use this information to select ECC algorithms supported by
|
|
the boot ROM or similar restrictions.
|
|
|
|
nand-rb:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description:
|
|
Contains the native Ready/Busy IDs.
|
|
|
|
required:
|
|
- reg
|
|
|
|
required:
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
examples:
|
|
- |
|
|
nand-controller {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* controller specific properties */
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
nand-ecc-mode = "soft";
|
|
nand-ecc-algo = "bch";
|
|
|
|
/* controller specific properties */
|
|
};
|
|
};
|