59 lines
3.0 KiB
Plaintext
59 lines
3.0 KiB
Plaintext
* Xilinx SDFEC(16nm) IP *
|
|
|
|
The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
|
|
which provides high-throughput LDPC and Turbo Code implementations.
|
|
The LDPC decode & encode functionality is capable of covering a range of
|
|
customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
|
|
principally covers codes used by LTE. The FEC Engine offers significant
|
|
power and area savings versus implementations done in the FPGA fabric.
|
|
|
|
|
|
Required properties:
|
|
- compatible: Must be "xlnx,sd-fec-1.1"
|
|
- clock-names : List of input clock names from the following:
|
|
- "core_clk", Main processing clock for processing core (required)
|
|
- "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
|
|
- "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
|
|
- "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
|
|
- "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional)
|
|
- "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
|
|
- "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
|
|
- "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
|
|
- clocks : Clock phandles (see clock_bindings.txt for details).
|
|
- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
|
|
location and length.
|
|
- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
|
|
being used.
|
|
- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
|
|
driven with a fixed value and is not present on the device, a value of 1
|
|
configures the DIN_WORDS to be block based, while a value of 2 configures the
|
|
DIN_WORDS input to be supplied for each AXI transaction.
|
|
- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
|
|
configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
|
|
of "4x128b".
|
|
- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
|
|
driven with a fixed value and is not present on the device, a value of 1
|
|
configures the DOUT_WORDS to be block based, while a value of 2 configures the
|
|
DOUT_WORDS input to be supplied for each AXI transaction.
|
|
- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
|
|
configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
|
|
of "4x128b".
|
|
Optional properties:
|
|
- interrupts: should contain SDFEC interrupt number
|
|
|
|
Example
|
|
---------------------------------------
|
|
sd_fec_0: sd-fec@a0040000 {
|
|
compatible = "xlnx,sd-fec-1.1";
|
|
clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
|
|
clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
|
|
reg = <0x0 0xa0040000 0x0 0x40000>;
|
|
interrupt-parent = <&axi_intc>;
|
|
interrupts = <1 0>;
|
|
xlnx,sdfec-code = "ldpc";
|
|
xlnx,sdfec-din-words = <0>;
|
|
xlnx,sdfec-din-width = <2>;
|
|
xlnx,sdfec-dout-words = <0>;
|
|
xlnx,sdfec-dout-width = <1>;
|
|
};
|