36 lines
1.2 KiB
Plaintext
36 lines
1.2 KiB
Plaintext
Freescale IRQSTEER Interrupt multiplexer
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be:
|
|
- "fsl,imx8m-irqsteer"
|
|
- "fsl,imx-irqsteer"
|
|
- reg: Physical base address and size of registers.
|
|
- interrupts: Should contain the up to 8 parent interrupt lines used to
|
|
multiplex the input interrupts. They should be specified sequentially
|
|
from output 0 to 7.
|
|
- clocks: Should contain one clock for entry in clock-names
|
|
see Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
- clock-names:
|
|
- "ipg": main logic clock
|
|
- interrupt-controller: Identifies the node as an interrupt controller.
|
|
- #interrupt-cells: Specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 1.
|
|
- fsl,channel: The output channel that all input IRQs should be steered into.
|
|
- fsl,num-irqs: Number of input interrupts of this channel.
|
|
Should be multiple of 32 input interrupts and up to 512 interrupts.
|
|
|
|
Example:
|
|
|
|
interrupt-controller@32e2d000 {
|
|
compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
|
|
reg = <0x32e2d000 0x1000>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
|
|
clock-names = "ipg";
|
|
fsl,channel = <0>;
|
|
fsl,num-irqs = <64>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|