65 lines
2.3 KiB
Plaintext
65 lines
2.3 KiB
Plaintext
Interconnect Provider Device Tree Bindings
|
|
=========================================
|
|
|
|
The purpose of this document is to define a common set of generic interconnect
|
|
providers/consumers properties.
|
|
|
|
|
|
= interconnect providers =
|
|
|
|
The interconnect provider binding is intended to represent the interconnect
|
|
controllers in the system. Each provider registers a set of interconnect
|
|
nodes, which expose the interconnect related capabilities of the interconnect
|
|
to consumer drivers. These capabilities can be throughput, latency, priority
|
|
etc. The consumer drivers set constraints on interconnect path (or endpoints)
|
|
depending on the use case. Interconnect providers can also be interconnect
|
|
consumers, such as in the case where two network-on-chip fabrics interface
|
|
directly.
|
|
|
|
Required properties:
|
|
- compatible : contains the interconnect provider compatible string
|
|
- #interconnect-cells : number of cells in a interconnect specifier needed to
|
|
encode the interconnect node id
|
|
|
|
Example:
|
|
|
|
snoc: interconnect@580000 {
|
|
compatible = "qcom,msm8916-snoc";
|
|
#interconnect-cells = <1>;
|
|
reg = <0x580000 0x14000>;
|
|
clock-names = "bus_clk", "bus_a_clk";
|
|
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
|
|
<&rpmcc RPM_SMD_SNOC_A_CLK>;
|
|
};
|
|
|
|
|
|
= interconnect consumers =
|
|
|
|
The interconnect consumers are device nodes which dynamically express their
|
|
bandwidth requirements along interconnect paths they are connected to. There
|
|
can be multiple interconnect providers on a SoC and the consumer may consume
|
|
multiple paths from different providers depending on use case and the
|
|
components it has to interact with.
|
|
|
|
Required properties:
|
|
interconnects : Pairs of phandles and interconnect provider specifier to denote
|
|
the edge source and destination ports of the interconnect path.
|
|
|
|
Optional properties:
|
|
interconnect-names : List of interconnect path name strings sorted in the same
|
|
order as the interconnects property. Consumers drivers will use
|
|
interconnect-names to match interconnect paths with interconnect
|
|
specifier pairs.
|
|
|
|
Reserved interconnect names:
|
|
* dma-mem: Path from the device to the main memory of
|
|
the system
|
|
|
|
Example:
|
|
|
|
sdhci@7864000 {
|
|
...
|
|
interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
|
|
interconnect-names = "sdhc-mem";
|
|
};
|