72 lines
2.3 KiB
Plaintext
72 lines
2.3 KiB
Plaintext
* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
|
|
|
|
Required properties:
|
|
- compatible : for SPI slave, use "adi,ad7879"
|
|
for I2C slave, use "adi,ad7879-1"
|
|
- reg : SPI chipselect/I2C slave address
|
|
See spi-bus.txt for more SPI slave properties
|
|
- interrupts : touch controller interrupt
|
|
- touchscreen-max-pressure : maximum reported pressure
|
|
- adi,resistance-plate-x : total resistance of X-plate (for pressure
|
|
calculation)
|
|
Optional properties:
|
|
- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
|
|
- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
|
|
13 : 2.560ms
|
|
14 : 3.584ms
|
|
15 : 4.096ms
|
|
This property has to be a '/bits/ 8' value
|
|
- adi,acquisition-time : 0: 2us
|
|
1: 4us
|
|
2: 8us
|
|
3: 16us
|
|
This property has to be a '/bits/ 8' value
|
|
- adi,median-filter-size : 0: disabled
|
|
1: 4 measurements
|
|
2: 8 measurements
|
|
3: 16 measurements
|
|
This property has to be a '/bits/ 8' value
|
|
- adi,averaging : 0: 2 middle values (1 if median disabled)
|
|
1: 4 middle values
|
|
2: 8 middle values
|
|
3: 16 values
|
|
This property has to be a '/bits/ 8' value
|
|
- adi,conversion-interval: : 0 : convert one time only
|
|
1-255: 515us + val * 35us (up to 9.440ms)
|
|
This property has to be a '/bits/ 8' value
|
|
- gpio-controller : Switch AUX/VBAT/GPIO pin to GPIO mode
|
|
|
|
Example:
|
|
|
|
ad7879@2c {
|
|
compatible = "adi,ad7879-1";
|
|
reg = <0x2c>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
|
touchscreen-max-pressure = <4096>;
|
|
adi,resistance-plate-x = <120>;
|
|
adi,first-conversion-delay = /bits/ 8 <3>;
|
|
adi,acquisition-time = /bits/ 8 <1>;
|
|
adi,median-filter-size = /bits/ 8 <2>;
|
|
adi,averaging = /bits/ 8 <1>;
|
|
adi,conversion-interval = /bits/ 8 <255>;
|
|
};
|
|
|
|
ad7879@1 {
|
|
compatible = "adi,ad7879";
|
|
spi-max-frequency = <5000000>;
|
|
reg = <1>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
gpio-controller;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
|
touchscreen-max-pressure = <4096>;
|
|
adi,resistance-plate-x = <120>;
|
|
adi,first-conversion-delay = /bits/ 8 <3>;
|
|
adi,acquisition-time = /bits/ 8 <1>;
|
|
adi,median-filter-size = /bits/ 8 <2>;
|
|
adi,averaging = /bits/ 8 <1>;
|
|
adi,conversion-interval = /bits/ 8 <255>;
|
|
};
|