47 lines
1.1 KiB
Plaintext
47 lines
1.1 KiB
Plaintext
Broadcom iProc I2C controller
|
|
|
|
Required properties:
|
|
|
|
- compatible:
|
|
Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
|
|
|
|
- reg:
|
|
Define the base and range of the I/O address space that contain the iProc
|
|
I2C controller registers
|
|
|
|
- clock-frequency:
|
|
This is the I2C bus clock. Need to be either 100000 or 400000
|
|
|
|
- #address-cells:
|
|
Always 1 (for I2C addresses)
|
|
|
|
- #size-cells:
|
|
Always 0
|
|
|
|
Optional properties:
|
|
|
|
- interrupts:
|
|
Should contain the I2C interrupt. For certain revisions of the I2C
|
|
controller, I2C interrupt is unwired to the interrupt controller. In such
|
|
case, this property should be left unspecified, and driver will fall back
|
|
to polling mode
|
|
|
|
- brcm,ape-hsls-addr-mask:
|
|
Required for "brcm,iproc-nic-i2c". Host view of address mask into the
|
|
'APE' co-processor. Value must be unsigned, 32-bit
|
|
|
|
Example:
|
|
i2c0: i2c@18008000 {
|
|
compatible = "brcm,iproc-i2c";
|
|
reg = <0x18008000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
|
clock-frequency = <100000>;
|
|
|
|
codec: wm8750@1a {
|
|
compatible = "wlf,wm8750";
|
|
reg = <0x1a>;
|
|
};
|
|
};
|